| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <8ac4d84f-c792-893d-fbae-fac88fac8631@gmail.com>
Date: Sun, 10 Mar 2019 20:49:14 +0100
From: Jacek Anaszewski <jacek.anaszewski@...il.com>
To: Dan Murphy <dmurphy@...com>, robh+dt@...nel.org, pavel@....cz,
tony@...mide.com, lee.jones@...aro.org
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-leds@...r.kernel.org
Subject: Re: [PATCH 4/4] leds: lm3532: Introduce the lm3532 LED driver
Hi Dan,
Thank your for the patch.
I have some comments below, please take a look.
On 3/7/19 11:09 PM, Dan Murphy wrote:
> Introduce the Texas Instruments LM3532 White LED driver.
> The driver supports ALS configurability or manual brightness
> control.
>
> The driver also supports associating LED strings with specific
> control banks in a group or as individually controlled strings.
>
> Signed-off-by: Dan Murphy <dmurphy@...com>
> ---
> drivers/leds/Kconfig | 10 +
> drivers/leds/Makefile | 1 +
> drivers/leds/leds-lm3532.c | 595 +++++++++++++++++++++++++
> include/dt-bindings/leds/leds-lm3532.h | 72 +++
> 4 files changed, 678 insertions(+)
> create mode 100644 drivers/leds/leds-lm3532.c
> create mode 100644 include/dt-bindings/leds/leds-lm3532.h
>
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index a72f97fca57b..da00b9ed5a5c 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -138,6 +138,16 @@ config LEDS_LM3530
> controlled manually or using PWM input or using ambient
> light automatically.
>
> +config LEDS_LM3532
> + tristate "LCD Backlight driver for LM3532"
> + depends on LEDS_CLASS
> + depends on I2C
> + help
> + This option enables support for the LCD backlight using
> + LM3532 ambient light sensor chip. This ALS chip can be
> + controlled manually or using PWM input or using ambient
> + light automatically.
> +
> config LEDS_LM3533
> tristate "LED support for LM3533"
> depends on LEDS_CLASS
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index 4c1b0054f379..7a8b1f55d459 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -18,6 +18,7 @@ obj-$(CONFIG_LEDS_BD2802) += leds-bd2802.o
> obj-$(CONFIG_LEDS_CPCAP) += leds-cpcap.o
> obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o
> obj-$(CONFIG_LEDS_LM3530) += leds-lm3530.o
> +obj-$(CONFIG_LEDS_LM3532) += leds-lm3532.o
> obj-$(CONFIG_LEDS_LM3533) += leds-lm3533.o
> obj-$(CONFIG_LEDS_LM3642) += leds-lm3642.o
> obj-$(CONFIG_LEDS_MIKROTIK_RB532) += leds-rb532.o
> diff --git a/drivers/leds/leds-lm3532.c b/drivers/leds/leds-lm3532.c
> new file mode 100644
> index 000000000000..005478359d06
> --- /dev/null
> +++ b/drivers/leds/leds-lm3532.c
> @@ -0,0 +1,595 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// TI LM3532 LED driver
> +// Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
> +
> +#include <linux/i2c.h>
> +#include <linux/leds.h>
> +#include <linux/slab.h>
> +#include <linux/regmap.h>
> +#include <linux/input.h>
> +#include <linux/types.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/module.h>
> +#include <uapi/linux/uleds.h>
> +#include <linux/gpio/consumer.h>
> +
> +#include <dt-bindings/leds/leds-lm3532.h>
> +
> +#define LM3532_NAME "lm3532-led"
> +
> +#define LM3532_REG_OUTPUT_CFG 0x10
> +#define LM3532_REG_STARTSHUT_RAMP 0x11
> +#define LM3532_REG_RT_RAMP 0x12
> +#define LM3532_REG_PWM_A_CFG 0x13
> +#define LM3532_REG_PWM_B_CFG 0x14
> +#define LM3532_REG_PWM_C_CFG 0x15
> +#define LM3532_REG_ZONE_CFG_A 0x16
> +#define LM3532_REG_CTRL_A_BRT 0x17
> +#define LM3532_REG_ZONE_CFG_B 0x18
> +#define LM3532_REG_CTRL_B_BRT 0x19
> +#define LM3532_REG_ZONE_CFG_C 0x1a
> +#define LM3532_REG_CTRL_C_BRT 0x1b
> +#define LM3532_REG_ENABLE 0x1d
> +#define LM3532_ALS_CONFIG 0x23
> +#define LM3532_REG_ZN_0_HI 0x60
> +#define LM3532_REG_ZN_0_LO 0x61
> +#define LM3532_REG_ZN_1_HI 0x62
> +#define LM3532_REG_ZN_1_LO 0x63
> +#define LM3532_REG_ZN_2_HI 0x64
> +#define LM3532_REG_ZN_2_LO 0x65
> +#define LM3532_REG_ZN_3_HI 0x66
> +#define LM3532_REG_ZN_3_LO 0x67
> +#define LM3532_REG_MAX 0x7e
> +
> +/* Contorl Enable */
> +#define LM3532_CTRL_A_ENABLE BIT(0)
> +#define LM3532_CTRL_B_ENABLE BIT(1)
> +#define LM3532_CTRL_C_ENABLE BIT(2)
> +
> +/* PWM Zone Control */
> +#define LM3532_PWM_ZONE_MASK 0x7c
> +#define LM3532_PWM_ZONE_0_EN BIT(2)
> +#define LM3532_PWM_ZONE_1_EN BIT(3)
> +#define LM3532_PWM_ZONE_2_EN BIT(4)
> +#define LM3532_PWM_ZONE_3_EN BIT(5)
> +#define LM3532_PWM_ZONE_4_EN BIT(6)
> +
> +/* Brightness Configuration */
> +#define LM3532_I2C_CTRL BIT(0)
> +#define LM3532_LINEAR_MAP BIT(1)
> +#define LM3532_ZONE_MASK (BIT(2) | BIT(3) | BIT(4))
> +#define LM3532_ZONE_0 0
> +#define LM3532_ZONE_1 BIT(2)
> +#define LM3532_ZONE_2 BIT(3)
> +#define LM3532_ZONE_3 (BIT(2) | BIT(3))
> +#define LM3532_ZONE_4 BIT(4)
> +
> +#define LM3532_ENABLE_ALS BIT(3)
> +#define LM3532_ALS_SEL_SHIFT 6
> +
> +/* Zone Boundary Register */
> +#define LM3532_ALS_WINDOW_mV 2000
> +#define LM3532_ALS_ZB_MAX 4
> +#define LM3532_ALS_OFFSET_mV 2
> +
> +#define LM3532_CONTROL_A 0
> +#define LM3532_CONTROL_B 1
> +#define LM3532_CONTROL_C 2
> +#define LM3532_MAX_CONTROL_BANKS 3
> +#define LM3532_MAX_LED_STRINGS 3
> +
> +#define LM3532_OUTPUT_CFG_MASK 0x3
> +#define LM3532_BRT_VAL_ADJUST 8
> +#define LM3532_RAMP_DOWN_SHIFT 3
> +
> +/*
> + * struct lm3532_als_data
> + * @config - value of ALS configuration register
> + * @als1_imp_sel - value of ALS1 resistor select register
> + * @als2_imp_sel - value of ALS2 resistor select register
> + * @als_avrg_time - ALS averaging time
> + * @als_input_mode - ALS input mode for brightness control
> + * @als_vmin - Minimum ALS voltage
> + * @als_vmax - Maximum ALS voltage
> + * @zone_lo - values of ALS lo ZB(Zone Boundary) registers
> + * @zone_hi - values of ALS hi ZB(Zone Boundary) registers
> + */
> +struct lm3532_als_data {
> + u8 config;
> + u8 als1_imp_sel;
> + u8 als2_imp_sel;
> + u8 als_avrg_time;
> + u8 als_input_mode;
> + u32 als_vmin;
> + u32 als_vmax;
> + u8 zones_lo[LM3532_ALS_ZB_MAX];
> + u8 zones_hi[LM3532_ALS_ZB_MAX];
> +};
> +
> +/**
> + * struct lm3532_led
> + * @led_dev: led class device
> + * @priv - Pointer the device data structure
> + * @control_bank - Control bank the LED is associated to
> + * @mode - Mode of the LED string
> + * @num_leds - Number of LED strings are supported in this array
> + * @led_strings - The LED strings supported in this array
> + * @label - LED label
> + */
> +struct lm3532_led {
> + struct led_classdev led_dev;
> + struct lm3532_data *priv;
> +
> + int control_bank;
> + int mode;
> + int num_leds;
> + u32 led_strings[LM3532_MAX_CONTROL_BANKS];
> + char label[LED_MAX_NAME_SIZE];
> +};
> +
> +/**
> + * struct lm3532_data
> + * @enable_gpio - Hardware enable gpio
> + * @regulator: regulator
> + * @client: i2c client
> + * @regmap - Devices register map
> + * @dev - Pointer to the devices device struct
> + * @lock - Lock for reading/writing the device
> + * @als_data - Pointer to the als data struct
> + * @runtime_ramp_up - Runtime ramp up setting
> + * @runtime_ramp_down - Runtime ramp down setting
> + * @leds - Array of LED strings
> + */
> +struct lm3532_data {
> + struct gpio_desc *enable_gpio;
> + struct regulator *regulator;
> + struct i2c_client *client;
> + struct regmap *regmap;
> + struct device *dev;
> + struct mutex lock;
> +
> + struct lm3532_als_data *als_data;
> +
> + u32 runtime_ramp_up;
> + u32 runtime_ramp_down;
> +
> + struct lm3532_led leds[];
> +};
> +
> +static const struct reg_default lm3532_reg_defs[] = {
> + {LM3532_REG_OUTPUT_CFG, 0xe4},
> + {LM3532_REG_STARTSHUT_RAMP, 0xc0},
> + {LM3532_REG_RT_RAMP, 0xc0},
> + {LM3532_REG_PWM_A_CFG, 0x82},
> + {LM3532_REG_PWM_B_CFG, 0x82},
> + {LM3532_REG_PWM_C_CFG, 0x82},
> + {LM3532_REG_ZONE_CFG_A, 0xf1},
> + {LM3532_REG_CTRL_A_BRT, 0xf3},
> + {LM3532_REG_ZONE_CFG_B, 0xf1},
> + {LM3532_REG_CTRL_B_BRT, 0xf3},
> + {LM3532_REG_ZONE_CFG_C, 0xf1},
> + {LM3532_REG_CTRL_C_BRT, 0xf3},
> + {LM3532_REG_ENABLE, 0xf8},
> + {LM3532_ALS_CONFIG, 0x44},
> + {LM3532_REG_ZN_0_HI, 0x35},
> + {LM3532_REG_ZN_0_LO, 0x33},
> + {LM3532_REG_ZN_1_HI, 0x6a},
> + {LM3532_REG_ZN_1_LO, 0x66},
> + {LM3532_REG_ZN_2_HI, 0xa1},
> + {LM3532_REG_ZN_2_LO, 0x99},
> + {LM3532_REG_ZN_3_HI, 0xdc},
> + {LM3532_REG_ZN_3_LO, 0xcc},
> +};
> +
> +static const struct regmap_config lm3532_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> +
> + .max_register = LM3532_REG_MAX,
> + .reg_defaults = lm3532_reg_defs,
> + .num_reg_defaults = ARRAY_SIZE(lm3532_reg_defs),
> + .cache_type = REGCACHE_FLAT,
> +};
> +
> +static int lm3532_led_enable(struct lm3532_led *led_data)
> +{
> + int ctrl_en_val;
> + int ret;
> +
> + switch (led_data->control_bank) {
> + case LM3532_CONTROL_A:
> + ctrl_en_val = LM3532_CTRL_A_ENABLE;
> + break;
> + case LM3532_CONTROL_B:
> + ctrl_en_val = LM3532_CTRL_B_ENABLE;
> + break;
> + case LM3532_CONTROL_C:
> + ctrl_en_val = LM3532_CTRL_C_ENABLE;
> + break;
> + default:
> + dev_err(led_data->priv->dev, "Invalid control bank\n");
If control_bank was validated in lm3532_parse_node(), then you wouldn't
have to take into account this option here.
Besides, you don't need this switch statement, but can easily calculate
ctrl_en_val:
#define LM3532_GET_CTRL_BANK_EN_VAL(bank_id) BIT(bank_id)
> + return -EINVAL;
> + };
> +
> + ret = regmap_update_bits(led_data->priv->regmap, LM3532_REG_ENABLE,
> + ctrl_en_val, ctrl_en_val);
> + if (ret) {
> + dev_err(led_data->priv->dev, "Failed to set ctrl:%d\n", ret);
> + return ret;
> + }
> +
> + return regulator_enable(led_data->priv->regulator);
> +}
> +
> +static int lm3532_led_disable(struct lm3532_led *led_data)
> +{
> + int ctrl_en_val;
> + int ret;
> +
> + switch (led_data->control_bank) {
> + case LM3532_CONTROL_A:
> + ctrl_en_val = LM3532_CTRL_A_ENABLE;
> + break;
> + case LM3532_CONTROL_B:
> + ctrl_en_val = LM3532_CTRL_B_ENABLE;
> + break;
> + case LM3532_CONTROL_C:
> + ctrl_en_val = LM3532_CTRL_C_ENABLE;
> + break;
> + default:
> + dev_err(led_data->priv->dev, "Invalid control bank\n");
> + return -EINVAL;
> + };
Ditto.
> +
> + ret = regmap_update_bits(led_data->priv->regmap, LM3532_REG_ENABLE,
> + ctrl_en_val, ~ctrl_en_val);
> + if (ret) {
> + dev_err(led_data->priv->dev, "Failed to set ctrl:%d\n", ret);
> + return ret;
> + }
> +
> + return regulator_disable(led_data->priv->regulator);
> +}
> +
> +static int lm3532_brightness_set(struct led_classdev *led_cdev,
> + enum led_brightness brt_val)
> +{
> + struct lm3532_led *led =
> + container_of(led_cdev, struct lm3532_led, led_dev);
> + u8 brightnes_reg;
> + int ret;
> +
> + mutex_lock(&led->priv->lock);
> +
> + if (led->mode == LM3532_BL_MODE_ALS) {
> + ret = 0;
> + goto unlock;
> + }
> +
> + switch (led->control_bank) {
> + case LM3532_CONTROL_A:
> + brightnes_reg = LM3532_REG_CTRL_A_BRT;
> + break;
> + case LM3532_CONTROL_B:
> + brightnes_reg = LM3532_REG_CTRL_B_BRT;
> + break;
> + case LM3532_CONTROL_C:
> + brightnes_reg = LM3532_REG_CTRL_C_BRT;
> + break;
> + default:
> + dev_err(led->priv->dev, "Invalid control bank\n");
> + ret = -EINVAL;
> + goto unlock;
> + };
Similarly here. use following macro:
#define LM3532_GET_CTRL_BANK_BRT_REG (bank_id)
BIT((LM3532_REG_CTRL_A_BRT + bank_id*2))
> + if (brt_val == LED_OFF) {
> + ret = lm3532_led_disable(led);
> + goto unlock;
> + }
> +
> + lm3532_led_enable(led);
> + brt_val = brt_val / LM3532_BRT_VAL_ADJUST;
> +
> + ret = regmap_write(led->priv->regmap, brightnes_reg, brt_val);
> +
> +unlock:
> + mutex_unlock(&led->priv->lock);
> + return ret;
> +}
> +
> +static int lm3532_init_registers(struct lm3532_led *led)
> +{
> + struct lm3532_data *drvdata = led->priv;
> + unsigned int runtime_ramp_val;
> + unsigned int output_cfg_val = 0;
> + unsigned int output_cfg_shift = 0;
> + unsigned int output_cfg_mask = 0;
> + int ret, i;
> +
> + for (i = 0; i < led->num_leds; i++) {
> + output_cfg_shift = led->led_strings[i] * 2;
> + output_cfg_val |= (led->control_bank << output_cfg_shift);
> + output_cfg_mask |= LM3532_OUTPUT_CFG_MASK << output_cfg_shift;
> + }
> +
> + ret = regmap_update_bits(drvdata->regmap, LM3532_REG_OUTPUT_CFG,
> + output_cfg_mask, output_cfg_val);
> +
> + runtime_ramp_val = drvdata->runtime_ramp_up |
> + (drvdata->runtime_ramp_down << LM3532_RAMP_DOWN_SHIFT);
> +
> + return regmap_write(drvdata->regmap, LM3532_REG_RT_RAMP,
> + runtime_ramp_val);
> +}
> +
> +static int lm3532_als_configure(struct lm3532_data *priv)
> +{
> + struct lm3532_als_data *als = priv->als_data;
> + u32 als_vmin, als_vmax, als_vstep;
> + int zone_reg = LM3532_REG_ZN_0_HI;
> + int ret;
> + int i;
> +
> + als_vmin = als->als_vmin;
> + als_vmax = als->als_vmax;
> +
> + als_vstep = (als_vmax - als_vmin) / ((LM3532_ALS_ZB_MAX + 1) * 2);
> +
> + for (i = 0; i < LM3532_ALS_ZB_MAX; i++) {
> + als->zones_lo[i] = ((als_vmin + als_vstep + (i * als_vstep)) *
> + LED_FULL) / 1000;
> + als->zones_hi[i] = ((als_vmin + LM3532_ALS_OFFSET_mV +
> + als_vstep + (i * als_vstep)) * LED_FULL) / 1000;
> +
> + zone_reg = LM3532_REG_ZN_0_HI + i * 2;
> + ret = regmap_write(priv->regmap, zone_reg, als->zones_lo[i]);
> + if (ret)
> + return ret;
> +
> + zone_reg += 1;
> + ret = regmap_write(priv->regmap, zone_reg, als->zones_hi[i]);
> + if (ret)
> + return ret;
> + }
> +
> + als->config = (als->als_avrg_time | (LM3532_ENABLE_ALS) |
> + (als->als_input_mode << LM3532_ALS_SEL_SHIFT));
> +
> + return regmap_write(priv->regmap, LM3532_ALS_CONFIG, als->config);
> +}
> +
> +static int lm3532_parse_als(struct lm3532_data *priv)
> +{
> + struct lm3532_als_data *als;
> + int ret;
> +
> + als = devm_kzalloc(priv->dev, sizeof(*als), GFP_KERNEL);
> + if (als == NULL)
> + return -ENOMEM;
> +
> + ret = device_property_read_u32(&priv->client->dev, "als-vmin",
> + &als->als_vmin);
> + if (ret)
> + als->als_vmin = 0;
> +
> + ret = device_property_read_u32(&priv->client->dev, "als-vmax",
> + &als->als_vmax);
> + if (ret)
> + als->als_vmax = LM3532_ALS_WINDOW_mV;
> +
> + ret = device_property_read_u8(&priv->client->dev, "als1-imp-sel",
> + &als->als1_imp_sel);
> + if (ret)
> + als->als1_imp_sel = 0;
> +
> + ret = device_property_read_u8(&priv->client->dev, "als2-imp-sel",
> + &als->als2_imp_sel);
> + if (ret)
> + als->als2_imp_sel = 0;
> +
> + ret = device_property_read_u8(&priv->client->dev, "als-avrg-time",
> + &als->als_avrg_time);
> + if (ret)
> + als->als_avrg_time = 0;
> +
> + ret = device_property_read_u8(&priv->client->dev, "als-input-mode",
> + &als->als_input_mode);
> + if (ret)
> + als->als_input_mode = 0;
> +
> + priv->als_data = als;
> +
> + return ret;
> +}
> +
> +static int lm3532_parse_node(struct lm3532_data *priv)
> +{
> + struct fwnode_handle *child = NULL;
> + struct lm3532_led *led;
> + const char *name;
> + int control_bank;
> + size_t i = 0;
> + int ret;
> +
> + priv->enable_gpio = devm_gpiod_get_optional(&priv->client->dev,
> + "enable", GPIOD_OUT_LOW);
> + if (IS_ERR(priv->enable_gpio))
> + priv->enable_gpio = NULL;
> +
> + priv->regulator = devm_regulator_get(&priv->client->dev, "vin");
> + if (IS_ERR(priv->regulator))
> + priv->regulator = NULL;
> +
> + ret = device_property_read_u32(&priv->client->dev, "ramp-down-ms",
> + &priv->runtime_ramp_up);
> + if (ret)
> + dev_info(&priv->client->dev, "ramp-down-ms property missing\n");
> +
> + ret = device_property_read_u32(&priv->client->dev, "ramp-down-ms",
> + &priv->runtime_ramp_down);
> + if (ret)
> + dev_info(&priv->client->dev, "ramp-down-ms property missing\n");
> +
> + device_for_each_child_node(priv->dev, child) {
> + led = &priv->leds[i];
> +
> + ret = fwnode_property_read_u32(child, "reg", &control_bank);
> + if (ret) {
> + dev_err(&priv->client->dev, "reg property missing\n");
> + fwnode_handle_put(child);
> + goto child_out;
> + }
> +
> + if (control_bank > LM3532_CONTROL_C) {
> + dev_err(&priv->client->dev, "Control bank invalid\n");
> + continue;
> + }
> +
> + led->control_bank = control_bank;
> +
> + ret = fwnode_property_read_u32(child, "ti,led-mode",
> + &led->mode);
> + if (ret) {
> + dev_err(&priv->client->dev, "ti,led-mode property missing\n");
> + fwnode_handle_put(child);
> + goto child_out;
> + }
> +
> + if (led->mode == LM3532_BL_MODE_ALS) {
> + ret = lm3532_parse_als(priv);
> + if (ret)
> + dev_err(&priv->client->dev, "Failed to parse als\n");
> + else
> + lm3532_als_configure(priv);
> + }
> +
> + led->num_leds = fwnode_property_read_u32_array(child,
> + "led-sources",
> + NULL, 0);
> +
> + if (led->num_leds > LM3532_MAX_LED_STRINGS) {
> + dev_err(&priv->client->dev, "To many LED string defined\n");
> + continue;
> + }
> +
> + ret = fwnode_property_read_u32_array(child, "led-sources",
> + led->led_strings,
> + led->num_leds);
> + if (ret) {
> + dev_err(&priv->client->dev, "led-sources property missing\n");
> + fwnode_handle_put(child);
> + goto child_out;
> + }
> +
> + fwnode_property_read_string(child, "linux,default-trigger",
> + &led->led_dev.default_trigger);
> +
> + ret = fwnode_property_read_string(child, "label", &name);
> + if (ret)
> + snprintf(led->label, sizeof(led->label),
> + "%s::", priv->client->name);
> + else
> + snprintf(led->label, sizeof(led->label),
> + "%s:%s", priv->client->name, name);
> +
> + led->priv = priv;
> + led->led_dev.name = led->label;
> + led->led_dev.brightness_set_blocking = lm3532_brightness_set;
> +
> + ret = devm_led_classdev_register(priv->dev, &led->led_dev);
> + if (ret) {
> + dev_err(&priv->client->dev, "led register err: %d\n",
> + ret);
> + fwnode_handle_put(child);
> + goto child_out;
> + }
> +
> + lm3532_init_registers(led);
> +
> + i++;
> + }
> +
> +child_out:
> + return ret;
> +}
> +
> +static int lm3532_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct lm3532_data *drvdata;
> + int ret = 0;
> + int count;
> +
> + count = device_get_child_node_count(&client->dev);
> + if (!count) {
> + dev_err(&client->dev, "LEDs are not defined in device tree!");
> + return -ENODEV;
> + }
> +
> + drvdata = devm_kzalloc(&client->dev, struct_size(drvdata, leds, count),
> + GFP_KERNEL);
> + if (drvdata == NULL)
> + return -ENOMEM;
> +
> + drvdata->client = client;
> + drvdata->dev = &client->dev;
> +
> + drvdata->regmap = devm_regmap_init_i2c(client, &lm3532_regmap_config);
> + if (IS_ERR(drvdata->regmap)) {
> + ret = PTR_ERR(drvdata->regmap);
> + dev_err(&client->dev, "Failed to allocate register map: %d\n",
> + ret);
> + return ret;
> + }
> +
> + mutex_init(&drvdata->lock);
> + i2c_set_clientdata(client, drvdata);
> +
> + ret = lm3532_parse_node(drvdata);
> + if (ret) {
> + dev_err(&client->dev, "Failed to parse node\n");
> + return ret;
> + }
> +
> + if (drvdata->enable_gpio)
> + gpiod_direction_output(drvdata->enable_gpio, 1);
> +
> + return ret;
> +}
> +
> +static int lm3532_remove(struct i2c_client *client)
> +{
> + struct lm3532_data *drvdata = i2c_get_clientdata(client);
mutex_destroy() is missing here.
> + if (drvdata->enable_gpio)
> + gpiod_direction_output(drvdata->enable_gpio, 0);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id of_lm3532_leds_match[] = {
> + { .compatible = "ti,lm3532", },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, of_lm3532_leds_match);
> +
> +static const struct i2c_device_id lm3532_id[] = {
> + {LM3532_NAME, 0},
> + {}
> +};
> +MODULE_DEVICE_TABLE(i2c, lm3532_id);
> +
> +static struct i2c_driver lm3532_i2c_driver = {
> + .probe = lm3532_probe,
> + .remove = lm3532_remove,
> + .id_table = lm3532_id,
> + .driver = {
> + .name = LM3532_NAME,
> + .of_match_table = of_lm3532_leds_match,
> + },
> +};
> +module_i2c_driver(lm3532_i2c_driver);
> +
> +MODULE_DESCRIPTION("Back Light driver for LM3532");
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Dan Murphy <dmurphy@...com>");
> diff --git a/include/dt-bindings/leds/leds-lm3532.h b/include/dt-bindings/leds/leds-lm3532.h
> new file mode 100644
> index 000000000000..724dbc0cb395
> --- /dev/null
> +++ b/include/dt-bindings/leds/leds-lm3532.h
This should go in a separate patch, with DT bindings - see checkpatch.pl
complaint.
> @@ -0,0 +1,72 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/* TI LM3532 LED driver
> + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
> + */
> +
> +#ifndef __DT_BINDINGS_LEDS_LM3532_H
> +#define __DT_BINDINGS_LEDS_LM3532_H
> +
> +#define LM3532_BL_MODE_MANUAL 0x00 /* "man" */
> +#define LM3532_BL_MODE_ALS 0x01 /* "als" */
> +
> +/* ALS Resistor Select */
> +#define LM3532_IMP_HIGH 0x00
> +#define LM3532_IMP_37K 0x01
> +#define LM3532_IMP_18_5K 0x02
> +#define LM3532_IMP_12_33K 0x03
> +#define LM3532_IMP_9_25K 0x04
> +#define LM3532_IMP_7_4K 0x05
> +#define LM3532_IMP_6_17K 0x06
> +#define LM3532_IMP_5_29K 0x07
> +#define LM3532_IMP_4_63K 0x08
> +#define LM3532_IMP_4_11K 0x09
> +#define LM3532_IMP_3_7K 0x0a
> +#define LM3532_IMP_3_36K 0x0b
> +#define LM3532_IMP_3_08K 0x0c
> +#define LM3532_IMP_2_85K 0x0d
> +#define LM3532_IMP_2_64K 0x0e
> +#define LM3532_IMP_2_44K 0x0f
> +#define LM3532_IMP_2_31K 0x10
> +#define LM3532_IMP_2_18K 0x11
> +#define LM3532_IMP_2_06K 0x12
> +#define LM3532_IMP_1_95K 0x13
> +#define LM3532_IMP_1_85K 0x14
> +#define LM3532_IMP_1_76K 0x15
> +#define LM3532_IMP_1_68K 0x16
> +#define LM3532_IMP_1_61K 0x17
> +#define LM3532_IMP_1_54K 0x18
> +#define LM3532_IMP_1_48K 0x19
> +#define LM3532_IMP_1_42K 0x1a
> +#define LM3532_IMP_1_37K 0x1b
> +#define LM3532_IMP_1_32K 0x1c
> +#define LM3532_IMP_1_28K 0x1d
> +#define LM3532_IMP_1_23K 0x1e
> +#define LM3532_IMP_1_19K 0x1f
> +
> +/* ALS Averaging Time */
> +#define LM3532_ALS_AVRG_TIME_17_92ms 0x00
> +#define LM3532_ALS_AVRG_TIME_35_84ms 0x01
> +#define LM3532_ALS_AVRG_TIME_71_68ms 0x02
> +#define LM3532_ALS_AVRG_TIME_143_36ms 0x03
> +#define LM3532_ALS_AVRG_TIME_286_72ms 0x04
> +#define LM3532_ALS_AVRG_TIME_573_44ms 0x05
> +#define LM3532_ALS_AVRG_TIME_1146_88ms 0x06
> +#define LM3532_ALS_AVRG_TIME_2293_76ms 0x07
> +
> +/* ALS input select */
> +#define LM3532_ALS_INPUT_AVRG 0x00 /* ALS1 and ALS2 input average */
> +#define LM3532_ALS_INPUT_ALS1 0x01 /* ALS1 Input */
> +#define LM3532_ALS_INPUT_ALS2 0x02 /* ALS2 Input */
> +#define LM3532_ALS_INPUT_CEIL 0x03 /* Max of ALS1 and ALS2 */
> +
> +/* Ramp Times */
> +#define LM3532_RAMP_8us 0x00
> +#define LM3532_RAMP_1024us 0x01
> +#define LM3532_RAMP_2048us 0x02
> +#define LM3532_RAMP_4096us 0x03
> +#define LM3532_RAMP_8192us 0x04
> +#define LM3532_RAMP_16384us 0x05
> +#define LM3532_RAMP_32768us 0x06
> +#define LM3532_RAMP_65536us 0x07
> +
> +#endif /* __DT_BINDINGS_LEDS_LM3532_H */
>
--
Best regards,
Jacek Anaszewski
Powered by blists - more mailing lists