lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Mon, 11 Mar 2019 12:11:51 +0100 From: Marek Szyprowski <m.szyprowski@...sung.com> To: Jochen Sprickerhof <jochen@...ickerhof.de> Cc: Roger Quadros <rogerq@...com>, Felipe Balbi <balbi@...nel.org>, Greg Kroah-Hartman <gregkh@...uxfoundation.org>, linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org, Kishon Vijay Abraham I <kishon@...com> Subject: Re: [PATCH] usb: dwc3: Enable GBit Ethernet on Odroid XU4 Hi Jochen, On 2019-02-08 20:35, Jochen Sprickerhof wrote: > Hi Marek, > > * Marek Szyprowski <m.szyprowski@...sung.com> [2019-02-08 13:36]: >>>>> On 21/01/19 16:02, Jochen Sprickerhof wrote: >>>> [..] >>>>>> I'm not sure why this it only works with the driver compiled into >>>>>> the >>>>>> kernel nor why it needs a hard reset or why it was the line was >>>>>> dropped >>>>>> when the patch was accepted. Would be great to get some feedback >>>>>> of the >>>>>> authors. >>>>> When XHCI driver is compiled into the kernel are the relevant PHY >>>>> drivers >>>>> compiled in as well? >>>> Only CONFIG_USB_PHY=y (I took the config from the >>>> linux-image-4.19.0-1-armmp_4.19.13-1_armhf.deb Debian package as a >>>> basis where this is the default). >> >> I confirm that on Odroid XU4 USB 3.0 works only when all related drivers >> (dwc3, xhci and exynos5 drd phy) are compiled into the kernel. If they >> are compiled as modules, USB 3.0 calibration doesn't work. The mentioned >> patch doesn't fix anything. > > I've just tried Linux v5.0-rc5 with the Debian config and > USB_XHCI_PLATFORM=y and it works, thanks! > > Is there a way to make it work with xhci compiled as a module, so it > would work in Debian out of the box? One more comment - 5000M mode will also work with everything compiled as modules (dwc3, exynos5 drd phy and xhci-plat) too. Just make sure that xhci-plat is loaded before dwc3. This would require some manual configuration, because autoloading will load xhci-plat after dwc3 probe and switch to host mode. Best regards -- Marek Szyprowski, PhD Samsung R&D Institute Poland
Powered by blists - more mailing lists