linux-kernel - Re: [PATCH] usb: dwc3: Enable GBit Ethernet on Odroid XU4

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Date:   Wed, 20 Mar 2019 19:12:25 +0100
From:   Jochen Sprickerhof <jochen@...ickerhof.de>
To:     Marek Szyprowski <m.szyprowski@...sung.com>
Cc:     Roger Quadros <rogerq@...com>, Felipe Balbi <balbi@...nel.org>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
        Kishon Vijay Abraham I <kishon@...com>
Subject: Re: [PATCH] usb: dwc3: Enable GBit Ethernet on Odroid XU4

Hi Marek,

* Marek Szyprowski <m.szyprowski@...sung.com> [2019-03-11 12:11]:
>Hi Jochen,
>
>On 2019-02-08 20:35, Jochen Sprickerhof wrote:
>> Hi Marek,
>>
>> * Marek Szyprowski <m.szyprowski@...sung.com> [2019-02-08 13:36]:
>>>>>> On 21/01/19 16:02, Jochen Sprickerhof wrote:
>>>>> [..]
>>>>>>> I'm not sure why this it only works with the driver compiled into
>>>>>>> the
>>>>>>> kernel nor why it needs a hard reset or why it was the line was
>>>>>>> dropped
>>>>>>> when the patch was accepted. Would be great to get some feedback
>>>>>>> of the
>>>>>>> authors.
>>>>>> When XHCI driver is compiled into the kernel are the relevant PHY
>>>>>> drivers
>>>>>> compiled in as well?
>>>>> Only CONFIG_USB_PHY=y (I took the config from the
>>>>> linux-image-4.19.0-1-armmp_4.19.13-1_armhf.deb Debian package as a
>>>>> basis where this is the default).
>>>
>>> I confirm that on Odroid XU4 USB 3.0 works only when all related drivers
>>> (dwc3, xhci and exynos5 drd phy) are compiled into the kernel. If they
>>> are compiled as modules, USB 3.0 calibration doesn't work. The mentioned
>>> patch doesn't fix anything.
>>
>> I've just tried Linux v5.0-rc5 with the Debian config and
>> USB_XHCI_PLATFORM=y and it works, thanks!
>>
>> Is there a way to make it work with xhci compiled as a module, so it
>> would work in Debian out of the box?
>
>One more comment - 5000M mode will also work with everything compiled as
>modules (dwc3, exynos5 drd phy and xhci-plat) too. Just make sure that
>xhci-plat is loaded before dwc3. This would require some manual
>configuration, because autoloading will load xhci-plat after dwc3 probe
>and switch to host mode.

Thanks so much for the hint, this made it working :). I opened a bug 
with Debian:

https://bugs.debian.org/925167

Cheers Jochen

Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)