lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Mon, 25 Mar 2019 12:41:32 +0200
From:   Adrian Hunter <adrian.hunter@...el.com>
To:     Sowjanya Komatineni <skomatineni@...dia.com>,
        ulf.hansson@...aro.org, robh+dt@...nel.org, mark.rutland@....com,
        riteshh@...eaurora.org
Cc:     thierry.reding@...il.com, jonathanh@...dia.com, anrao@...dia.com,
        linux-tegra@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-mmc@...r.kernel.org, devicetree@...r.kernel.org
Subject: Re: [PATCH V4 07/10] mmc: tegra: add Tegra186 WAR for CQE

On 24/03/19 6:45 AM, Sowjanya Komatineni wrote:
> Tegra186 CQHCI host has a known bug where CQHCI controller selects
> DATA_PRESENT_SELECT bit to 1 for DCMDs with R1B response type and
> since DCMD does not trigger any data transfer, DCMD task complete
> happens leaving the DATA FSM of host controller in wait state for
> the data.
> 
> This effects the data transfer tasks issued after the DCMDs with
> R1b response type resulting in timeout.
> 
> SW WAR is to set CMD_TIMING to 1 in DCMD task descriptor. This bug
> and SW WAR is applicable only for Tegra186 and not for Tegra194.
> 
> This patch implements this WAR thru NVQUIRK_CQHCI_DCMD_R1B_CMD_TIMING
> for Tegra186 and also implements update_dcmd_desc of cqhci_host_ops
> interface to set CMD_TIMING bit depending on the NVQUIRK.
> 
> Tested-by: Jon Hunter <jonathanh@...dia.com>
> Reviewed-by: Ritesh Harjani <riteshh@...eaurora.org>
> Signed-off-by: Sowjanya Komatineni <skomatineni@...dia.com>

Acked-by: Adrian Hunter <adrian.hunter@...el.com>

> ---
>  drivers/mmc/host/sdhci-tegra.c | 17 ++++++++++++++++-
>  1 file changed, 16 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
> index f1aa0591112a..2f08b6e480df 100644
> --- a/drivers/mmc/host/sdhci-tegra.c
> +++ b/drivers/mmc/host/sdhci-tegra.c
> @@ -106,6 +106,7 @@
>  #define NVQUIRK_HAS_PADCALIB				BIT(6)
>  #define NVQUIRK_NEEDS_PAD_CONTROL			BIT(7)
>  #define NVQUIRK_DIS_CARD_CLK_CONFIG_TAP			BIT(8)
> +#define NVQUIRK_CQHCI_DCMD_R1B_CMD_TIMING		BIT(9)
>  
>  /* SDMMC CQE Base Address for Tegra Host Ver 4.1 and Higher */
>  #define SDHCI_TEGRA_CQE_BASE_ADDR			0xF000
> @@ -1123,6 +1124,18 @@ static void tegra_sdhci_voltage_switch(struct sdhci_host *host)
>  		tegra_host->pad_calib_required = true;
>  }
>  
> +static void sdhci_tegra_update_dcmd_desc(struct mmc_host *mmc,
> +					 struct mmc_request *mrq, u64 *data)
> +{
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(mmc_priv(mmc));
> +	struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
> +	const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data;
> +
> +	if (soc_data->nvquirks & NVQUIRK_CQHCI_DCMD_R1B_CMD_TIMING &&
> +	    mrq->cmd->flags & MMC_RSP_R1B)
> +		*data |= CQHCI_CMD_TIMING(1);
> +}
> +
>  static void sdhci_tegra_cqe_enable(struct mmc_host *mmc)
>  {
>  	struct cqhci_host *cq_host = mmc->cqe_private;
> @@ -1164,6 +1177,7 @@ static const struct cqhci_host_ops sdhci_tegra_cqhci_ops = {
>  	.enable	= sdhci_tegra_cqe_enable,
>  	.disable = sdhci_cqe_disable,
>  	.dumpregs = sdhci_tegra_dumpregs,
> +	.update_dcmd_desc = sdhci_tegra_update_dcmd_desc,
>  };
>  
>  static const struct sdhci_ops tegra_sdhci_ops = {
> @@ -1345,7 +1359,8 @@ static const struct sdhci_tegra_soc_data soc_data_tegra186 = {
>  		    NVQUIRK_HAS_PADCALIB |
>  		    NVQUIRK_DIS_CARD_CLK_CONFIG_TAP |
>  		    NVQUIRK_ENABLE_SDR50 |
> -		    NVQUIRK_ENABLE_SDR104,
> +		    NVQUIRK_ENABLE_SDR104 |
> +		    NVQUIRK_CQHCI_DCMD_R1B_CMD_TIMING,
>  	.min_tap_delay = 84,
>  	.max_tap_delay = 136,
>  };
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ