lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Sat, 6 Apr 2019 13:38:26 +0300
From:   Sakari Ailus <sakari.ailus@....fi>
To:     Mickael Guene <mickael.guene@...com>
Cc:     linux-media@...r.kernel.org, hugues.fruchet@...com,
        Mauro Carvalho Chehab <mchehab@...nel.org>,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        "David S. Miller" <davem@...emloft.net>,
        Nicolas Ferre <nicolas.ferre@...rochip.com>,
        Rob Herring <robh+dt@...nel.org>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Mark Rutland <mark.rutland@....com>
Subject: Re: [PATCH v4 1/2] dt-bindings: Document MIPID02 bindings

On Sat, Apr 06, 2019 at 01:35:25PM +0300, Sakari Ailus wrote:
> Hi Mickael,
> 
> On Wed, Mar 27, 2019 at 10:55:43AM +0100, Mickael Guene wrote:
> > This adds documentation of device tree for MIPID02 CSI-2 to PARALLEL
> > bridge.
> > 
> > Signed-off-by: Mickael Guene <mickael.guene@...com>
> > ---
> > 
> > Changes in v4:
> > - Fix and clarify endpoints properties documentation
> > 
> > Changes in v3: None
> > Changes in v2:
> > - Add precision about first CSI-2 port data rate
> > - Document endpoints supported properties
> > - Rename 'mipid02@14' into generic 'csi2rx@14' in example
> > 
> >  .../bindings/media/i2c/st,st-mipid02.txt           | 82 ++++++++++++++++++++++
> >  MAINTAINERS                                        |  7 ++
> >  2 files changed, 89 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/i2c/st,st-mipid02.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.txt b/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.txt
> > new file mode 100644
> > index 0000000..754a175
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.txt
> > @@ -0,0 +1,82 @@
> > +STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge
> > +
> > +MIPID02 has two CSI-2 input ports, only one of those ports can be active at a
> > +time. Active port input stream will be de-serialized and its content outputted
> > +through PARALLEL output port.
> > +CSI-2 first input port is a dual lane 800Mbps per lane whereas CSI-2 second
> > +input port is a single lane 800Mbps. Both ports support clock and data lane
> > +polarity swap. First port also supports data lane swap.
> > +PARALLEL output port has a maximum width of 12 bits.
> > +Supported formats are RAW6, RAW7, RAW8, RAW10, RAW12, RGB565, RGB888, RGB444,
> > +YUV420 8-bit, YUV422 8-bit and YUV420 10-bit.
> > +
> > +Required Properties:
> > +- compatible: should be "st,st-mipid02"
> 
> s/should/shall/ overall; other values aren't really valid in any of the
> cases.

As this is the only change and it's trivial, I can do that as well. Let me
know if that works for you.

-- 
Sakari Ailus

Powered by blists - more mailing lists