lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAHCN7xLKNO3+2pY4-S7=yPnxOF3mDCjTOUi4jVHufkhZuJNzAg@mail.gmail.com>
Date:   Wed, 10 Apr 2019 13:47:34 -0500
From:   Adam Ford <aford173@...il.com>
To:     Andrey Smirnov <andrew.smirnov@...il.com>
Cc:     Shawn Guo <shawnguo@...nel.org>, Angus Ainslie <angus@...ea.ca>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Chris Healy <cphealy@...il.com>,
        Fabio Estevam <fabio.estevam@....com>,
        arm-soc <linux-arm-kernel@...ts.infradead.org>,
        Lucas Stach <l.stach@...gutronix.de>
Subject: Re: [PATCH v3 1/9] ARM: dts: imx6qdl: Specify IMX6QDL_CLK_IPG as
 "ipg" clock to SDMA

On Fri, Mar 29, 2019 at 1:49 AM Andrey Smirnov <andrew.smirnov@...il.com> wrote:
>
> Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
> clock to determine if it needs to configure the IP block as operating
> at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
> clocks as IMX6QDL_CLK_SDMA results in driver incorrectly thinking that
> ratio is 1:1 which results in broken SDMA funtionality(this at least
> breaks RAVE SP serdev driver on RDU2). Fix the code to specify
> IMX6QDL_CLK_IPG as "ipg" clock for SDMA, to avoid detecting incorrect
> clock ratio.
>
Thank you for this!  I the 5.1 kernel is the first revision to include
the i.MX6 kit from Logic PD and I thought I messed something up, so I
was off in a completely different direction trying to figure out why
it was broken.  With your patch, my board works again!

> Fixes: 25aaa75df1e6 ("dmaengine: imx-sdma: add clock ratio 1:1 check")
> Signed-off-by: Andrey Smirnov <andrew.smirnov@...il.com>
> Reviewed-by: Lucas Stach <l.stach@...gutronix.de>

Tested-by: Adam Ford <aford173@...il.com> #imx6q-logicpd

> Cc: Angus Ainslie (Purism) <angus@...ea.ca>
> Cc: Chris Healy <cphealy@...il.com>
> Cc: Lucas Stach <l.stach@...gutronix.de>
> Cc: Fabio Estevam <fabio.estevam@....com>
> Cc: Shawn Guo <shawnguo@...nel.org>
> Cc: linux-arm-kernel@...ts.infradead.org
> Cc: linux-kernel@...r.kernel.org
> ---
>  arch/arm/boot/dts/imx6qdl.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
> index 9f9aa6e7ed0e..354feba077b2 100644
> --- a/arch/arm/boot/dts/imx6qdl.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl.dtsi
> @@ -949,7 +949,7 @@
>                                 compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
>                                 reg = <0x020ec000 0x4000>;
>                                 interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
> -                               clocks = <&clks IMX6QDL_CLK_SDMA>,
> +                               clocks = <&clks IMX6QDL_CLK_IPG>,
>                                          <&clks IMX6QDL_CLK_SDMA>;
>                                 clock-names = "ipg", "ahb";
>                                 #dma-cells = <3>;
> --
> 2.20.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ