lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-ID: <4099DE2E54AFAD489356C6C9161D53339591D64A@DGGEML502-MBX.china.huawei.com> Date: Fri, 12 Apr 2019 00:57:24 +0000 From: Linhaifeng <haifeng.lin@...wei.com> To: "linux-perf-users@...r.kernel.org" <linux-perf-users@...r.kernel.org>, "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org> Subject: perf tools:Is there any tools to found out the max latency by irq or cpu idle Hi, I have a single thread application like this: While (1) { start = rdtsc(); sqrt (1024); end = rdtsc(); cycles = end – start; printf("cycles: %d-%02d-%02d %02d:%02d:%02d: %lu\n", 1900+timeinfo->tm_year, 1+timeinfo->tm_mon, timeinfo->tm_mday, timeinfo->tm_hour, timeinfo->tm_min, timeinfo->tm_sec, cycles); } It print the cycles of sqrt every second and run with taskset –c 1 ./sqrt. The result of test is: sqrt 2019-04-10 23:53:50: 43968 sqrt 2019-04-10 23:53:51: 44060 sqrt 2019-04-10 23:53:52: 49012 sqrt 2019-04-10 23:53:53: 38172 sqrt 2019-04-10 23:53:54: 131081408 sqrt 2019-04-10 23:53:55: 43600 sqrt 2019-04-10 23:53:56: 46704 sqrt 2019-04-10 23:53:57: 46880 sqrt 2019-04-10 23:53:58: 44332 …… sqrt 2019-04-10 02:17:15: 131081408 …… sqrt 2019-04-10 04:40:35: 131081408 …… Every 2hour23min there would be a large cycles. I use perf sched not found any sched_switch events. L2GW_2680:/home/fsp/zn # perf sched record -C 6-11 -o perf.sched ^C[ perf record: Woken up 64 times to write data ] [ perf record: Captured and wrote 204.878 MB perf.sched (1911189 samples) ] L2GW_2680:/home/fsp/zn # perf sched latency -i perf.sched ----------------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | Maximum delay at | ----------------------------------------------------------------------------------------------------------------- ----------------------------------------------------------------------------------------------------------------- TOTAL: | 0.000 ms | 0 | --------------------------------------------------- Is there any other tools of perf to found out the max latency by irq or cpu idle ?
Powered by blists - more mailing lists