Date:   Fri, 12 Apr 2019 22:28:57 +0800
From:   YueHaibing <yuehaibing@...wei.com>
To:     Boris Brezillon <boris.brezillon@...labora.com>,
        Miquel Raynal <miquel.raynal@...tlin.com>
CC:     <richard@....at>, <computersforpeace@...il.com>,
        <marek.vasut@...il.com>, <paul.burton@...s.com>,
        <bbrezillon@...nel.org>, <linux-kernel@...r.kernel.org>,
        <linux-mtd@...ts.infradead.org>
Subject: Re: [PATCH] mtd: nand: Fix build error while
 CONFIG_MTD_NAND_ECC_SW_BCH is set to module

On 2019/4/11 1:03, Boris Brezillon wrote:
> On Wed, 10 Apr 2019 18:18:43 +0200
> Miquel Raynal <miquel.raynal@...tlin.com> wrote:
> 
>> Hi YueHaibing,
>>
>> YueHaibing <yuehaibing@...wei.com> wrote on Wed, 10 Apr 2019 23:03:24
>> +0800:
>>
>>> On 2019/4/10 22:29, Boris Brezillon wrote:  
>>>> On Wed, 10 Apr 2019 22:22:16 +0800
>>>> YueHaibing <yuehaibing@...wei.com> wrote:
>>>>     
>>>>> On 2019/4/10 21:58, Boris Brezillon wrote:    
>>>>>> On Wed, 10 Apr 2019 15:39:28 +0200
>>>>>> Boris Brezillon <boris.brezillon@...labora.com> wrote:
>>>>>>       
>>>>>>> On Wed, 10 Apr 2019 21:07:47 +0800
>>>>>>> Yue Haibing <yuehaibing@...wei.com> wrote:
>>>>>>>      
>>>>>>>> From: YueHaibing <yuehaibing@...wei.com>
>>>>>>>>
>>>>>>>> Fix gcc build error while CONFIG_MTD_NAND_ECC_SW_BCH
>>>>>>>> is set to module:
>>>>>>>>
>>>>>>>> drivers/mtd/nand/raw/nand_base.o: In function `nand_cleanup':
>>>>>>>> (.text+0xef6): undefined reference to `nand_bch_free'
>>>>>>>> drivers/mtd/nand/raw/nand_base.o: In function `nand_scan_tail':
>>>>>>>> nand_base.c:(.text+0xa101): undefined reference to `nand_bch_calculate_ecc'
>>>>>>>> nand_base.c:(.text+0xa120): undefined reference to `nand_bch_correct_data'
>>>>>>>> nand_base.c:(.text+0xa269): undefined reference to `nand_bch_init'
>>>>>>>>
>>>>>>>> CONFIG_MTD_NAND_ECC_SW_BCH should not be set to M,
>>>>>>>> because MTD_RAW_NAND need it while linked.
>>>>>>>>
>>>>>>>> Reported-by: Hulk Robot <hulkci@...wei.com>
>>>>>>>> Fixes: 193bd4002644 ("mtd: nand: add software BCH ECC support"        
>>>>>>>
>>>>>>> Nope, it's not this one that introduced the regression.
>>>>>>>
>>>>>>>
>>>>>>>      
>>>>>>>> Signed-off-by: YueHaibing <yuehaibing@...wei.com>
>>>>>>>> ---
>>>>>>>>  drivers/mtd/nand/raw/Kconfig | 2 +-
>>>>>>>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>>>>>>>
>>>>>>>> diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
>>>>>>>> index 615d738..0500c42 100644
>>>>>>>> --- a/drivers/mtd/nand/raw/Kconfig
>>>>>>>> +++ b/drivers/mtd/nand/raw/Kconfig
>>>>>>>> @@ -22,7 +22,7 @@ menuconfig MTD_RAW_NAND
>>>>>>>>  if MTD_RAW_NAND
>>>>>>>>  
>>>>>>>>  config MTD_NAND_ECC_SW_BCH
>>>>>>>> -	tristate "Support software BCH ECC"
>>>>>>>> +	bool "Support software BCH ECC"
>>>>>>>>  	select BCH
>>>>>>>>  	default n
>>>>>>>>  	help        
>>>>>>>
>>>>>>> Should be fixed with the following diff squashed into:
>>>>>>>
>>>>>>> 51ef1d0b2095 ("mtd: nand: Clarify Kconfig entry for software BCH ECC algorithm")
>>>>>>>      
>>>>>>> --->8---        
>>>>>>> diff --git a/include/linux/mtd/nand_bch.h b/include/linux/mtd/nand_bch.h
>>>>>>> index b8106651f807..06ce2b655c13 100644
>>>>>>> --- a/include/linux/mtd/nand_bch.h
>>>>>>> +++ b/include/linux/mtd/nand_bch.h
>>>>>>> @@ -15,7 +15,7 @@ struct mtd_info;
>>>>>>>  struct nand_chip;
>>>>>>>  struct nand_bch_control;
>>>>>>>  
>>>>>>> -#if defined(CONFIG_MTD_NAND_ECC_BCH)
>>>>>>> +#if defined(CONFIG_MTD_NAND_ECC_SW_BCH)
>>>>>>>  
>>>>>>>  static inline int mtd_nand_has_bch(void) { return 1; }
>>>>>>>  
>>>>>>> @@ -39,7 +39,7 @@ struct nand_bch_control *nand_bch_init(struct mtd_info *mtd);
>>>>>>>   */
>>>>>>>  void nand_bch_free(struct nand_bch_control *nbc);
>>>>>>>  
>>>>>>> -#else /* !CONFIG_MTD_NAND_ECC_BCH */
>>>>>>> +#else /* !CONFIG_MTD_NAND_ECC_SW_BCH */
>>>>>>>  
>>>>>>>  static inline int mtd_nand_has_bch(void) { return 0; }
>>>>>>>  
>>>>>>> @@ -64,6 +64,6 @@ static inline struct nand_bch_control *nand_bch_init(struct mtd_info *mtd)
>>>>>>>  
>>>>>>>  static inline void nand_bch_free(struct nand_bch_control *nbc) {}
>>>>>>>  
>>>>>>> -#endif /* CONFIG_MTD_NAND_ECC_BCH */
>>>>>>> +#endif /* CONFIG_MTD_NAND_ECC_SW_BCH */
>>>>>>>  
>>>>>>>  #endif /* __MTD_NAND_BCH_H__ */      
>>>>>>
>>>>>> Sorry, I didn't look at the right branch, this part of the code was
>>>>>> correct, but we still have a problem to express the RAW_NAND(y) ->
>>>>>> SW_BCH(y) dependency.      
>>>>>
>>>>> It seems this dependency is not always need,
>>>>>
>>>>> case MTD_RAW_NAND set to y works well while CONFIG_MTD_NAND_ECC_SW_BCH is not set.    
>>>>
>>>> Yes, I know, but forcing nand_bch to a be a boolean is not the right
>>>> solution either, hence my suggestion to use 'imply'.    
>>
>> Why exactly? SW BCH is going to be converted to the generic ECC engine
>> abstraction and IIRC you told me that it would not be problematic to
>> turn it into a boolean?
> 
> Yes, I told you we should turn it into a boolean and embed the code in
> the nandcore.o object which can itself be linked as a module or embedded
> in the kernel image (see above for a version adapted for nand.o). That's
> not exactly what Yue proposed.

So is there anothor fix or just to pick my v2 ?

https://patchwork.ozlabs.org/patch/1083480/

> 
> --->8---
> diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
> index 7fcdaf6c279d..f9258d666846 100644
> --- a/drivers/mtd/devices/Kconfig
> +++ b/drivers/mtd/devices/Kconfig
> @@ -207,7 +207,7 @@ comment "Disk-On-Chip Device Drivers"
>  config MTD_DOCG3
>         tristate "M-Systems Disk-On-Chip G3"
>         select BCH
> -       select BCH_CONST_PARAMS if !CONFIG_MTD_NAND_ECC_SW_BCH
> +       select BCH_CONST_PARAMS if !MTD_NAND_ECC_SW_BCH
>         select BITREVERSE
>         help
>           This provides an MTD device driver for the M-Systems DiskOnChip
> diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
> index 615d738be411..0500c42f31cb 100644
> --- a/drivers/mtd/nand/raw/Kconfig
> +++ b/drivers/mtd/nand/raw/Kconfig
> @@ -22,7 +22,7 @@ menuconfig MTD_RAW_NAND
>  if MTD_RAW_NAND
>  
>  config MTD_NAND_ECC_SW_BCH
> -       tristate "Support software BCH ECC"
> +       bool "Support software BCH ECC"
>         select BCH
>         default n
>         help
> diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
> index 8bc6faaa3bc7..d644185fa18d 100644
> --- a/drivers/mtd/nand/raw/Makefile
> +++ b/drivers/mtd/nand/raw/Makefile
> @@ -2,7 +2,6 @@
>  
>  obj-$(CONFIG_MTD_RAW_NAND)             += nand.o
>  obj-$(CONFIG_MTD_NAND_ECC_SW_HAMMING)  += nand_ecc.o
> -obj-$(CONFIG_MTD_NAND_ECC_SW_BCH)      += nand_bch.o
>  obj-$(CONFIG_MTD_SM_COMMON)            += sm_common.o
>  
>  obj-$(CONFIG_MTD_NAND_CAFE)            += cafe_nand.o
> @@ -68,3 +67,5 @@ nand-objs += nand_macronix.o
>  nand-objs += nand_micron.o
>  nand-objs += nand_samsung.o
>  nand-objs += nand_toshiba.o
> +nand-objs-$(CONFIG_MTD_NAND_ECC_SW_BCH)        += nand_bch.o
> +nand-objs += $(nand-objs-y)
> 
> 
> 
> .
> 

Powered by blists - more mailing lists