| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 15 Apr 2019 07:58:17 -0700
From: Angus Ainslie <angus@...ea.ca>
To: Leonard Crestez <leonard.crestez@....com>
Cc: matti.vaittinen@...rohmeurope.com,
dl-linux-imx <linux-imx@....com>, linux-kernel@...r.kernel.org,
robh+dt@...nel.org, devicetree@...r.kernel.org, festevam@...il.com,
mark.rutland@....com, shawnguo@...nel.org,
linux-arm-kernel@...ts.infradead.org,
Robin Gong <yibin.gong@....com>, kernel@...gutronix.de,
s.hauer@...gutronix.de
Subject: Re: [PATCH v2 1/2] arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkit
On 2019-04-12 07:39, Leonard Crestez wrote:
> On Fri, 2019-04-12 at 07:04 -0600, Angus Ainslie (Purism) wrote:
>> +&i2c1 {
>> + clock-frequency = <400000>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_i2c1>;
>> + status = "okay";
>> +
>> + pmic: pmic@4b {
>> + reg = <0x4b>;
>> + compatible = "rohm,bd71837";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_pmic>;
>> + clocks = <&pmic_osc>;
>> + clock-names = "osc";
>> + clock-output-names = "pmic_clk";
>> + interrupt-parent = <&gpio1>;
>> + interrupts = <3 GPIO_ACTIVE_LOW>;
>> + interrupt-names = "irq";
>> + rohm,reset-snvs-powered;
>> +
>> + gpo {
>> + /* 0b0000_1100 all gpos with cmos output mode
>> */
>> + rohm,drv = <0x0C>;
>> + };
>
> After searching for this gpo/rohm,drv property it does not seem to be
> documented or handled anywhere?
>
> Should probably just drop.
Right I can't find it in the driver either. I'll drop it.
Thanks
Angus
>
>> + regulators {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + buck1_reg: BUCK1@0 {
>> + reg = <0>;
>> + regulator-name = "buck1";
>> + regulator-min-microvolt = <700000>;
>> + regulator-max-microvolt = <1300000>;
>> + regulator-boot-on;
>> + regulator-always-on;
>> + regulator-ramp-delay = <1250>;
>> + rohm,dvs-run-voltage = <900000>;
>> + rohm,dvs-idle-voltage = <850000>;
>> + rohm,dvs-suspend-voltage = <800000>;
>> + };
>> +
>> + buck2_reg: BUCK2@1 {
>> + reg = <1>;
>> + regulator-name = "buck2";
>> + regulator-min-microvolt = <700000>;
>> + regulator-max-microvolt = <1300000>;
>> + regulator-boot-on;
>> + regulator-always-on;
>> + regulator-ramp-delay = <1250>;
>> + rohm,dvs-run-voltage = <1000000>;
>> + rohm,dvs-idle-voltage = <900000>;
>> + };
>> +
>> + buck3_reg: BUCK3@2 {
>> + reg = <2>;
>> + regulator-name = "buck3";
>> + regulator-min-microvolt = <700000>;
>> + regulator-max-microvolt = <1300000>;
>> + rohm,dvs-run-voltage = <1000000>;
>> + };
>> +
>> + buck4_reg: BUCK4@3 {
>> + reg = <3>;
>> + regulator-name = "buck4";
>> + regulator-min-microvolt = <700000>;
>> + regulator-max-microvolt = <1300000>;
>> + rohm,dvs-run-voltage = <1000000>;
>> + };
>> +
>> + buck5_reg: BUCK5@4 {
>> + reg = <4>;
>> + regulator-name = "buck5";
>> + regulator-min-microvolt = <700000>;
>> + regulator-max-microvolt = <1350000>;
>> + regulator-boot-on;
>> + regulator-always-on;
>> + };
>> +
>> + buck6_reg: BUCK6@5 {
>> + reg = <5>;
>> + regulator-name = "buck6";
>> + regulator-min-microvolt = <3000000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-boot-on;
>> + regulator-always-on;
>> + };
>> +
>> + buck7_reg: BUCK7@6 {
>> + reg = <6>;
>> + regulator-name = "buck7";
>> + regulator-min-microvolt = <1605000>;
>> + regulator-max-microvolt = <1995000>;
>> + regulator-boot-on;
>> + regulator-always-on;
>> + };
>> +
>> + buck8_reg: BUCK8@7 {
>> + reg = <7>;
>> + regulator-name = "buck8";
>> + regulator-min-microvolt = <800000>;
>> + regulator-max-microvolt = <1400000>;
>> + regulator-boot-on;
>> + regulator-always-on;
>> + };
>> +
>> + ldo1_reg: LDO1@8 {
>> + reg = <8>;
>> + regulator-name = "ldo1";
>> + regulator-min-microvolt = <3000000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-boot-on;
>> + regulator-always-on;
>> + };
>> +
>> + ldo2_reg: LDO2@9 {
>> + reg = <9>;
>> + regulator-name = "ldo2";
>> + regulator-min-microvolt = <900000>;
>> + regulator-max-microvolt = <900000>;
>> + regulator-boot-on;
>> + regulator-always-on;
>> + };
>> +
>> + ldo3_reg: LDO3@10 {
>> + reg = <10>;
>> + regulator-name = "ldo3";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-boot-on;
>> + regulator-always-on;
>> + };
>> +
>> + ldo4_reg: LDO4@11 {
>> + reg = <11>;
>> + regulator-name = "ldo4";
>> + regulator-min-microvolt = <900000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-boot-on;
>> + regulator-always-on;
>> + };
>> +
>> + ldo5_reg: LDO5@12 {
>> + reg = <12>;
>> + regulator-name = "ldo5";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <3300000>;
>> + };
>> +
>> + ldo6_reg: LDO6@13 {
>> + reg = <13>;
>> + regulator-name = "ldo6";
>> + regulator-min-microvolt = <900000>;
>> + regulator-max-microvolt = <1800000>;
>> + };
>> +
>> + ldo7_reg: LDO7@14 {
>> + reg = <14>;
>> + regulator-name = "ldo7";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <3300000>;
>> + };
>> + };
>> + };
Powered by blists - more mailing lists