[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1555435497.2317.17.camel@pengutronix.de>
Date: Tue, 16 Apr 2019 19:24:57 +0200
From: Lucas Stach <l.stach@...gutronix.de>
To: Andrey Smirnov <andrew.smirnov@...il.com>, linux-pm@...r.kernel.org
Cc: Chris Healy <cphealy@...il.com>,
Eduardo Valentin <edubezval@...il.com>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Angus Ainslie <angus@...ea.ca>, linux-imx@....com,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4 00/12] QorIQ TMU multi-sensor and HWMON support
Series is:
Tested-by: Lucas Stach <l.stach@...gutronix.de>
Regards,
Lucas
Am Samstag, den 13.04.2019, 01:27 -0700 schrieb Andrey Smirnov:
> Everyone:
>
> This series contains patches adding support for HWMON integration, bug
> fixes and general improvements (hopefully) for TMU driver I made while
> working on it on i.MX8MQ.
>
> Feedback is welcome!
>
> Thanks,
> Andrey Smirnov
>
> Changes since [v3]
>
> - Series reabse on top of [rfc]
>
> - Fixed incorrect goto label in "thermal: qoriq: Pass data to
> qoriq_tmu_calibration()"
>
> - Added REGS_TRITSR() register description to "thermal: qoriq: Do
> not report invalid temperature reading"
>
> - Reworded commit message of "thermal: qoriq: Remove unnecessary
> DT node is NULL check"
>
> Changes since [v2]
>
> - Patches rebased on v5.1-rc1
>
> Changes since [v1]
>
> - Rebased on "linus" branch of
> git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git
> that included latest chagnes adding multi-sensors support
>
> - Dropped
>
> thermal: qoriq: Add support for multiple thremal sites
> thermal: qoriq: Be more strict when parsing
> thermal: qoriq: Simplify error handling in qoriq_tmu_get_sensor_id()
>
> since they are no longer relevant
>
> - Added
>
> thermal: qoriq: Don't store struct thermal_zone_device reference
> thermal: qoriq: Add local struct qoriq_sensor pointer
> thermal: qoriq: Embed per-sensor data into struct qoriq_tmu_data
> thermal: qoriq: Pass data to qoriq_tmu_register_tmu_zone() directly
>
> to simplify latest codebase
>
> - Changed "thermal: qoriq: Do not report invalid temperature
> reading" to use regmap_read_poll_timeout() to make sure that
> tmu_get_temp() waits for fist sample to be ready before
> reporting it. This case is triggered on my setup if
> qoriq_thermal is compiled as a module
>
> [v1] lore.kernel.org/lkml/20190218191141.3729-1-andrew.smirnov@...il.com
> [v2] lore.kernel.org/lkml/20190222200508.26325-1-andrew.smirnov@...il.com
> [v3] lore.kernel.org/lkml/20190401041418.5999-1-andrew.smirnov@...il.com
> [rfc] lore.kernel.org/lkml/20190404080647.8173-1-daniel.lezcano@...aro.org
>
> Andrey Smirnov (12):
> thermal: qoriq: Remove unnecessary DT node is NULL check
> thermal: qoriq: Add local struct device pointer
> thermal: qoriq: Don't store struct thermal_zone_device reference
> thermal: qoriq: Drop per-sensor data
> thermal: qoriq: Pass data to qoriq_tmu_register_tmu_zone() directly
> thermal: qoriq: Pass data to qoriq_tmu_calibration() directly
> thermal: qoriq: Convert driver to use devm_ioremap()
> thermal: qoriq: Convert driver to use regmap API
> thermal: qoriq: Enable all sensors before registering them
> thermal: qoriq: Do not report invalid temperature reading
> thermal_hwmon: Add devres wrapper for thermal_add_hwmon_sysfs()
> thermal: qoriq: Add hwmon support
>
> drivers/thermal/qoriq_thermal.c | 287 +++++++++++++++-----------------
> drivers/thermal/thermal_hwmon.c | 28 ++++
> drivers/thermal/thermal_hwmon.h | 7 +
> 3 files changed, 171 insertions(+), 151 deletions(-)
>
Powered by blists - more mailing lists