lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Tue, 16 Apr 2019 10:08:49 +0200
From:   Matthias Brugger <matthias.bgg@...il.com>
To:     Zhiyong Tao <zhiyong.tao@...iatek.com>, robh+dt@...nel.org,
        linus.walleij@...aro.org, mark.rutland@....com,
        sean.wang@...nel.org
Cc:     srv_heupstream@...iatek.com, hui.liu@...iatek.com,
        eddie.huang@...iatek.com, chuanjia.liu@...iatek.com,
        biao.huang@...iatek.com, hongzhou.yang@...iatek.com,
        erin.lo@...iatek.com, sean.wang@...iatek.com,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        linux-mediatek@...ts.infradead.org, linux-gpio@...r.kernel.org
Subject: Re: [PATCH RESEND v3 4/4] pinctrl: add drive for I2C related pins on
 MT8183



On 25/03/2019 13:41, Zhiyong Tao wrote:
> This patch provides the advanced drive for I2C used pins on MT8183.
> The detail strength specification description of the I2C pin:
> When E1=0/E0=0, the strength is 0.125mA.
> When E1=0/E0=1, the strength is 0.25mA.
> When E1=1/E0=0, the strength is 0.5mA.
> When E1=1/E0=1, the strength is 1mA.
> For I2C pins, there are existing generic driving setup and the above
> specific driving setup. I2C pins can only support 2/4/6/8/10/12/14/16mA
> driving adjustment in generic driving setup. But in specific driving
> setup, they can support 0.125/0.25/0.5/1mA adjustment.
> If we enable specific driving setup for I2C pins,
> the existing generic driving setup will be disabled.
> For some special features, we need the I2C pins specific driving setup.
> The specific driving setup is controlled by E1E0EN.
> So we need add extra vendor driving preperty instead of the generic
> driving property. We can add "mediatek,drive-strength-adv = <XXX>;"
> to describe the specific driving setup property.
> "XXX" means the value of E1E0EN. So the valid arguments of
> "mediatek,drive-strength-adv" are from 0 to 7.
> 
> Signed-off-by: Zhiyong Tao <zhiyong.tao@...iatek.com>
> ---
>  drivers/pinctrl/mediatek/pinctrl-mt8183.c        | 50 ++++++++++++++++++++++++
>  drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c | 47 ++++++++++++++++++++++
>  drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h | 11 ++++++
>  drivers/pinctrl/mediatek/pinctrl-paris.c         | 12 ++++++
>  4 files changed, 120 insertions(+)
> 

Linus, did that fall through the cracks? Do you have any comments on this driver?

Regards,
Matthias

> diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8183.c b/drivers/pinctrl/mediatek/pinctrl-mt8183.c
> index 6262fd3678ea..2c7409ed16fa 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-mt8183.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-mt8183.c
> @@ -472,6 +472,51 @@ static const struct mtk_pin_field_calc mt8183_pin_r1_range[] = {
>  	PIN_FIELD_BASE(133, 133, 8, 0x0D0, 0x10, 13, 1),
>  };
>  
> +static const struct mtk_pin_field_calc mt8183_pin_e1e0en_range[] = {
> +	PIN_FIELD_BASE(48, 48, 3, 0x0F0, 0x10, 20, 1),
> +	PIN_FIELD_BASE(49, 49, 3, 0x0F0, 0x10, 15, 1),
> +	PIN_FIELD_BASE(50, 50, 4, 0x0F0, 0x10, 12, 1),
> +	PIN_FIELD_BASE(51, 51, 4, 0x0F0, 0x10, 7, 1),
> +	PIN_FIELD_BASE(81, 81, 5, 0x0F0, 0x10, 12, 1),
> +	PIN_FIELD_BASE(82, 82, 5, 0x0F0, 0x10, 9, 1),
> +	PIN_FIELD_BASE(83, 83, 5, 0x0F0, 0x10, 19, 1),
> +	PIN_FIELD_BASE(84, 84, 5, 0x0F0, 0x10, 22, 1),
> +	PIN_FIELD_BASE(103, 103, 6, 0x0F0, 0x10, 24, 1),
> +	PIN_FIELD_BASE(104, 104, 6, 0x0F0, 0x10, 14, 1),
> +	PIN_FIELD_BASE(105, 105, 6, 0x0F0, 0x10, 27, 1),
> +	PIN_FIELD_BASE(106, 106, 6, 0x0F0, 0x10, 17, 1),
> +};
> +
> +static const struct mtk_pin_field_calc mt8183_pin_e0_range[] = {
> +	PIN_FIELD_BASE(48, 48, 3, 0x0F0, 0x10, 21, 1),
> +	PIN_FIELD_BASE(49, 49, 3, 0x0F0, 0x10, 16, 1),
> +	PIN_FIELD_BASE(50, 50, 4, 0x0F0, 0x10, 13, 1),
> +	PIN_FIELD_BASE(51, 51, 4, 0x0F0, 0x10, 8, 1),
> +	PIN_FIELD_BASE(81, 81, 5, 0x0F0, 0x10, 13, 1),
> +	PIN_FIELD_BASE(82, 82, 5, 0x0F0, 0x10, 10, 1),
> +	PIN_FIELD_BASE(83, 83, 5, 0x0F0, 0x10, 20, 1),
> +	PIN_FIELD_BASE(84, 84, 5, 0x0F0, 0x10, 23, 1),
> +	PIN_FIELD_BASE(103, 103, 6, 0x0F0, 0x10, 25, 1),
> +	PIN_FIELD_BASE(104, 104, 6, 0x0F0, 0x10, 15, 1),
> +	PIN_FIELD_BASE(105, 105, 6, 0x0F0, 0x10, 28, 1),
> +	PIN_FIELD_BASE(106, 106, 6, 0x0F0, 0x10, 18, 1),
> +};
> +
> +static const struct mtk_pin_field_calc mt8183_pin_e1_range[] = {
> +	PIN_FIELD_BASE(48, 48, 3, 0x0F0, 0x10, 22, 1),
> +	PIN_FIELD_BASE(49, 49, 3, 0x0F0, 0x10, 17, 1),
> +	PIN_FIELD_BASE(50, 50, 4, 0x0F0, 0x10, 14, 1),
> +	PIN_FIELD_BASE(51, 51, 4, 0x0F0, 0x10, 9, 1),
> +	PIN_FIELD_BASE(81, 81, 5, 0x0F0, 0x10, 14, 1),
> +	PIN_FIELD_BASE(82, 82, 5, 0x0F0, 0x10, 11, 1),
> +	PIN_FIELD_BASE(83, 83, 5, 0x0F0, 0x10, 21, 1),
> +	PIN_FIELD_BASE(84, 84, 5, 0x0F0, 0x10, 24, 1),
> +	PIN_FIELD_BASE(103, 103, 6, 0x0F0, 0x10, 26, 1),
> +	PIN_FIELD_BASE(104, 104, 6, 0x0F0, 0x10, 16, 1),
> +	PIN_FIELD_BASE(105, 105, 6, 0x0F0, 0x10, 29, 1),
> +	PIN_FIELD_BASE(106, 106, 6, 0x0F0, 0x10, 19, 1),
> +};
> +
>  static const struct mtk_pin_reg_calc mt8183_reg_cals[PINCTRL_PIN_REG_MAX] = {
>  	[PINCTRL_PIN_REG_MODE] = MTK_RANGE(mt8183_pin_mode_range),
>  	[PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt8183_pin_dir_range),
> @@ -485,6 +530,9 @@ static const struct mtk_pin_reg_calc mt8183_reg_cals[PINCTRL_PIN_REG_MAX] = {
>  	[PINCTRL_PIN_REG_PUPD] = MTK_RANGE(mt8183_pin_pupd_range),
>  	[PINCTRL_PIN_REG_R0] = MTK_RANGE(mt8183_pin_r0_range),
>  	[PINCTRL_PIN_REG_R1] = MTK_RANGE(mt8183_pin_r1_range),
> +	[PINCTRL_PIN_REG_DRV_EN] = MTK_RANGE(mt8183_pin_e1e0en_range),
> +	[PINCTRL_PIN_REG_DRV_E0] = MTK_RANGE(mt8183_pin_e0_range),
> +	[PINCTRL_PIN_REG_DRV_E1] = MTK_RANGE(mt8183_pin_e1_range),
>  };
>  
>  static const char * const mt8183_pinctrl_register_base_names[] = {
> @@ -517,6 +565,8 @@ static const struct mtk_pin_soc mt8183_data = {
>  	.drive_get = mtk_pinconf_drive_get_rev1,
>  	.adv_pull_get = mtk_pinconf_adv_pull_get,
>  	.adv_pull_set = mtk_pinconf_adv_pull_set,
> +	.adv_drive_get = mtk_pinconf_adv_drive_get,
> +	.adv_drive_set = mtk_pinconf_adv_drive_set,
>  };
>  
>  static const struct of_device_id mt8183_pinctrl_of_match[] = {
> diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
> index b1c368455d30..ef8732e8966b 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
> @@ -674,3 +674,50 @@ int mtk_pinconf_adv_pull_get(struct mtk_pinctrl *hw,
>  
>  	return 0;
>  }
> +
> +int mtk_pinconf_adv_drive_set(struct mtk_pinctrl *hw,
> +			      const struct mtk_pin_desc *desc, u32 arg)
> +{
> +	int err;
> +
> +	err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV_EN, arg & 1);
> +	if (err)
> +		return err;
> +
> +	if (arg & 1) {
> +		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV_E0,
> +				       !!(arg & 2));
> +		if (err)
> +			return err;
> +
> +		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV_E1,
> +				       !!(arg & 4));
> +		if (err)
> +			return err;
> +	}
> +
> +	return err;
> +}
> +
> +int mtk_pinconf_adv_drive_get(struct mtk_pinctrl *hw,
> +			      const struct mtk_pin_desc *desc, u32 *val)
> +{
> +	u32 en, e0, e1;
> +	int err;
> +
> +	err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV_EN, &en);
> +	if (err)
> +		return err;
> +
> +	err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV_E0, &e0);
> +	if (err)
> +		return err;
> +
> +	err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV_E1, &e1);
> +	if (err)
> +		return err;
> +
> +	*val = (e0 | e1 << 1 | en << 2) & 0x7;
> +
> +	return 0;
> +}
> diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
> index 6d24522739d9..1b7da42aa1d5 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
> +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
> @@ -63,6 +63,9 @@ enum {
>  	PINCTRL_PIN_REG_IES,
>  	PINCTRL_PIN_REG_PULLEN,
>  	PINCTRL_PIN_REG_PULLSEL,
> +	PINCTRL_PIN_REG_DRV_EN,
> +	PINCTRL_PIN_REG_DRV_E0,
> +	PINCTRL_PIN_REG_DRV_E1,
>  	PINCTRL_PIN_REG_MAX,
>  };
>  
> @@ -224,6 +227,10 @@ struct mtk_pin_soc {
>  	int (*adv_pull_get)(struct mtk_pinctrl *hw,
>  			    const struct mtk_pin_desc *desc, bool pullup,
>  			    u32 *val);
> +	int (*adv_drive_set)(struct mtk_pinctrl *hw,
> +			     const struct mtk_pin_desc *desc, u32 arg);
> +	int (*adv_drive_get)(struct mtk_pinctrl *hw,
> +			     const struct mtk_pin_desc *desc, u32 *val);
>  
>  	/* Specific driver data */
>  	void				*driver_data;
> @@ -287,5 +294,9 @@ int mtk_pinconf_adv_pull_set(struct mtk_pinctrl *hw,
>  int mtk_pinconf_adv_pull_get(struct mtk_pinctrl *hw,
>  			     const struct mtk_pin_desc *desc, bool pullup,
>  			     u32 *val);
> +int mtk_pinconf_adv_drive_set(struct mtk_pinctrl *hw,
> +			      const struct mtk_pin_desc *desc, u32 arg);
> +int mtk_pinconf_adv_drive_get(struct mtk_pinctrl *hw,
> +			      const struct mtk_pin_desc *desc, u32 *val);
>  
>  #endif /* __PINCTRL_MTK_COMMON_V2_H */
> diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
> index b59e10852bfb..dcd295f0eb4b 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-paris.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
> @@ -20,12 +20,14 @@
>  #define MTK_PIN_CONFIG_RDSEL	(PIN_CONFIG_END + 2)
>  #define MTK_PIN_CONFIG_PU_ADV	(PIN_CONFIG_END + 3)
>  #define MTK_PIN_CONFIG_PD_ADV	(PIN_CONFIG_END + 4)
> +#define MTK_PIN_CONFIG_DRV_ADV	(PIN_CONFIG_END + 5)
>  
>  static const struct pinconf_generic_params mtk_custom_bindings[] = {
>  	{"mediatek,tdsel",	MTK_PIN_CONFIG_TDSEL,		0},
>  	{"mediatek,rdsel",	MTK_PIN_CONFIG_RDSEL,		0},
>  	{"mediatek,pull-up-adv", MTK_PIN_CONFIG_PU_ADV,		1},
>  	{"mediatek,pull-down-adv", MTK_PIN_CONFIG_PD_ADV,	1},
> +	{"mediatek,drive-strength-adv", MTK_PIN_CONFIG_DRV_ADV,	2},
>  };
>  
>  #ifdef CONFIG_DEBUG_FS
> @@ -34,6 +36,7 @@ static const struct pin_config_item mtk_conf_items[] = {
>  	PCONFDUMP(MTK_PIN_CONFIG_RDSEL, "rdsel", NULL, true),
>  	PCONFDUMP(MTK_PIN_CONFIG_PU_ADV, "pu-adv", NULL, true),
>  	PCONFDUMP(MTK_PIN_CONFIG_PD_ADV, "pd-adv", NULL, true),
> +	PCONFDUMP(MTK_PIN_CONFIG_DRV_ADV, "drive-strengt-adv", NULL, true),
>  };
>  #endif
>  
> @@ -311,6 +314,15 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
>  			return -ENOTSUPP;
>  		}
>  		break;
> +	case MTK_PIN_CONFIG_DRV_ADV:
> +		if (hw->soc->adv_drive_set) {
> +			err = hw->soc->adv_drive_set(hw, desc, arg);
> +			if (err)
> +				return err;
> +		} else {
> +			return -ENOTSUPP;
> +		}
> +		break;
>  	default:
>  		err = -ENOTSUPP;
>  	}
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ