| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <e9eaa131-5791-c844-a02f-1bdd46719768@samsung.com>
Date: Tue, 16 Apr 2019 18:05:25 +0900
From: Chanwoo Choi <cw00.choi@...sung.com>
To: "Andrew-sh.Cheng" <andrew-sh.cheng@...iatek.com>,
MyungJoo Ham <myungjoo.ham@...sung.com>,
Kyungmin Park <kyungmin.park@...sung.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Matthias Brugger <matthias.bgg@...il.com>,
"Rafael J. Wysocki" <rjw@...ysocki.net>,
Viresh Kumar <viresh.kumar@...aro.org>
Cc: linux-pm@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, linux-kernel@...r.kernel.org,
srv_heupstream@...iatek.com, fan.chen@...iatek.com
Subject: Re: [PATCH v2 4/4] devfreq: add mediatek cci devfreq
Hi Andrew-sh.Cheng,
Please add the dt-binding documentation.
On 19. 3. 29. 오후 3:46, Andrew-sh.Cheng wrote:
> This adds a devfreq driver for the Cache Coherent Interconnect (CCI)
> of the Mediatek MT8183.
>
> On the MT8183 the CCI is supplied by the same regulator as the LITTLE
> cores. The driver is notified when the regulator voltage changes
> (driven by cpufreq) and adjusts the CCI frequency to the maximum
> possible value.
>
> Signed-off-by: Andrew-sh.Cheng <andrew-sh.cheng@...iatek.com>
> ---
> drivers/devfreq/Kconfig | 10 ++
> drivers/devfreq/Makefile | 1 +
> drivers/devfreq/mt8183-cci-devfreq.c | 235 +++++++++++++++++++++++++++++++++++
> 3 files changed, 246 insertions(+)
> create mode 100644 drivers/devfreq/mt8183-cci-devfreq.c
>
> diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
> index 6a172d3..da2f8ec 100644
> --- a/drivers/devfreq/Kconfig
> +++ b/drivers/devfreq/Kconfig
> @@ -91,6 +91,16 @@ config ARM_EXYNOS_BUS_DEVFREQ
> and adjusts the operating frequencies and voltages with OPP support.
> This does not yet operate with optimal voltages.
>
> +config ARM_MT8183_CCI_DEVFREQ
> + tristate "MT8183 CCI DEVFREQ Driver"
> + depends on ARM_MEDIATEK_CPUFREQ
> + help
> + This adds a devfreq driver for Cache Coherent Interconnect
> + of Mediatek MT8183, which is shared the same regulator
> + with cpu cluster.
> + It can track buck voltage and update a proper cci frequency.
> + Use notification to get regulator status.
> +
> config ARM_TEGRA_DEVFREQ
> tristate "Tegra DEVFREQ Driver"
> depends on ARCH_TEGRA_124_SOC
> diff --git a/drivers/devfreq/Makefile b/drivers/devfreq/Makefile
> index 32b8d4d..817dde7 100644
> --- a/drivers/devfreq/Makefile
> +++ b/drivers/devfreq/Makefile
> @@ -9,6 +9,7 @@ obj-$(CONFIG_DEVFREQ_GOV_PASSIVE) += governor_passive.o
>
> # DEVFREQ Drivers
> obj-$(CONFIG_ARM_EXYNOS_BUS_DEVFREQ) += exynos-bus.o
> +obj-$(CONFIG_ARM_MT8183_CCI_DEVFREQ) += mt8183-cci-devfreq.o
> obj-$(CONFIG_ARM_RK3399_DMC_DEVFREQ) += rk3399_dmc.o
> obj-$(CONFIG_ARM_TEGRA_DEVFREQ) += tegra-devfreq.o
>
> diff --git a/drivers/devfreq/mt8183-cci-devfreq.c b/drivers/devfreq/mt8183-cci-devfreq.c
> new file mode 100644
> index 0000000..af82d2e
> --- /dev/null
> +++ b/drivers/devfreq/mt8183-cci-devfreq.c
> @@ -0,0 +1,235 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2019 MediaTek Inc.
You can add the author information under copyright information.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/devfreq.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include "governor.h"
> +
> +struct cci_devfreq {
> + struct devfreq *devfreq;
> + struct regulator *proc_reg;
> + unsigned long proc_reg_uV;
> + struct clk *cci_clk;
> + struct notifier_block nb;
Just use the space instead of tab as following:
struct devfreq *devfreq;
struct regulator *proc_reg;
unsigned long proc_reg_uV;
struct clk *cci_clk;
struct notifier_block nb;
> +};
> +
> +static int cci_devfreq_regulator_notifier(struct notifier_block *nb,
> + unsigned long val, void *data)
> +{
> + struct cci_devfreq *cci_df =
> + container_of(nb, struct cci_devfreq, nb);
> +
> + /* deal with reduce frequency */
> + if (val & REGULATOR_EVENT_PRE_VOLTAGE_CHANGE) {
> + struct pre_voltage_change_data *pvc_data = data;
> +
> + if (pvc_data->min_uV < pvc_data->old_uV) {
> + cci_df->proc_reg_uV =
> + (unsigned long)(pvc_data->min_uV);
> + mutex_lock(&cci_df->devfreq->lock);
> + update_devfreq(cci_df->devfreq);
Please handle the return value of update_devfreq() for exception handling.
> + mutex_unlock(&cci_df->devfreq->lock);
> + }
> + }
> +
> + if ((val & REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE) &&
if -> else if
At the same time, receives only one notification.
It is not necessary to check the two if statement always, .
> + ((unsigned long)data > cci_df->proc_reg_uV)) {
> + cci_df->proc_reg_uV = (unsigned long)data;
> + mutex_lock(&cci_df->devfreq->lock);
> + update_devfreq(cci_df->devfreq);
ditto. Please check the return value of update_devfreq.
> + mutex_unlock(&cci_df->devfreq->lock);
> + }
> +
> + /* deal with increase frequency */
> + if ((val & REGULATOR_EVENT_VOLTAGE_CHANGE) &&
ditto.
if -> else if
At the same time, receives only one notification.
It is not necessary to check the two if statement always, .
> + (cci_df->proc_reg_uV < (unsigned long)data)) {
> + cci_df->proc_reg_uV = (unsigned long)data;
> + mutex_lock(&cci_df->devfreq->lock);
> + update_devfreq(cci_df->devfreq);
ditto. Please check the return value of update_devfreq.
> + mutex_unlock(&cci_df->devfreq->lock);
> + }
> +
> + return 0;
> +}
> +
> +static int mtk_cci_governor_get_target(struct devfreq *devfreq,
> + unsigned long *freq)
> +{
> + struct cci_devfreq *cci_df;
> + struct dev_pm_opp *opp;
> +
> + cci_df = dev_get_drvdata(devfreq->dev.parent);
> +
> + /* find available frequency */
> + opp = dev_pm_opp_find_max_freq_by_volt(devfreq->dev.parent,
> + cci_df->proc_reg_uV);
> + *freq = dev_pm_opp_get_freq(opp);
> +
> + return 0;
> +}
> +
> +static int mtk_cci_governor_event_handler(struct devfreq *devfreq,
> + unsigned int event, void *data)
> +{
> + struct cci_devfreq *cci_df;
> + struct notifier_block *nb;
> +
> + cci_df = dev_get_drvdata(devfreq->dev.parent);
> + nb = &cci_df->nb;
> +
> + switch (event) {
> + case DEVFREQ_GOV_START:
> + case DEVFREQ_GOV_RESUME:
> + nb->notifier_call = cci_devfreq_regulator_notifier;
> + regulator_register_notifier(cci_df->proc_reg,
> + nb);
Please check the return value of regulator_register_notifier
in order to handle the exception handling.
> + break;
> +
> + case DEVFREQ_GOV_STOP:
> + case DEVFREQ_GOV_SUSPEND:
> + regulator_unregister_notifier(cci_df->proc_reg,
> + nb);
ditto.
> +
Remove unneeded blank line.
> + break;
> +
> + default:
> + break;
> + }
> +
> + return 0;
> +}
> +
> +static struct devfreq_governor mtk_cci_devfreq_governor = {
> + .name = "mtk_cci_vmon",
How about editing the name from mtk_cci_vmon to mediatek_cci_voltage_monitor
for the readability? Actually, 'mtk' and 'vmon' are not standard expression.
> + .get_target_freq = mtk_cci_governor_get_target,
> + .event_handler = mtk_cci_governor_event_handler,
Please add following code to make it as the immutable
because the governor for this driver will not be changed
through sysfs interface.
.immutable = true
> +};
> +
> +static int mtk_cci_devfreq_target(struct device *dev, unsigned long *freq,
> + u32 flags)
> +{
> + struct cci_devfreq *cci_df = dev_get_drvdata(dev);
> +
> + if (!cci_df)
> + return -EINVAL;
> +
> + clk_set_rate(cci_df->cci_clk, *freq);
Please check the return value of clk_set_rate().
> +
> + return 0;
> +}
> +
> +static struct devfreq_dev_profile cci_devfreq_profile = {
> + .target = mtk_cci_devfreq_target,
Just use the space instead of tab because cci_devfreq_profile
only has one record.
.target = mtk_cci_devfreq_target,
> +};
> +
> +static int mtk_cci_devfreq_probe(struct platform_device *pdev)
> +{
> + struct device *cci_dev = &pdev->dev;
> + struct cci_devfreq *cci_df;
> + int ret;
> +
> + cci_df = devm_kzalloc(cci_dev, sizeof(*cci_df), GFP_KERNEL);
> + if (!cci_df)
> + return -ENOMEM;
> +
> + cci_df->cci_clk = clk_get(cci_dev, "cci_clock");
clk_get -> devm_clk_get()
> + ret = PTR_ERR_OR_ZERO(cci_df->cci_clk);
> + if (ret) {
> + if (ret != -EPROBE_DEFER)
> + dev_err(cci_dev, "failed to get clock for CCI: %d\n",
> + ret);
> +
Remove unneeded blank line.
> + return ret;
> + }> +
> + cci_df->proc_reg = regulator_get_optional(cci_dev, "proc");
regulator_get_optional -> devm_regulator_get_optional
> + ret = PTR_ERR_OR_ZERO(cci_df->proc_reg);
> + if (ret) {
> + if (ret != -EPROBE_DEFER)
> + dev_err(cci_dev, "failed to get regulator for CCI: %d\n",
> + ret);
> +
Remove unneeded blank line.
> + goto err_put_clk;
If you use devm_clk_get(), just return instead of goto.
> + }
> +
> + ret = dev_pm_opp_of_add_table(&pdev->dev);
> + if (ret) {
> + dev_err(cci_dev, "Fail to init CCI OPP table\n");
> + goto err_put_reg;
> + }
> +
> + platform_set_drvdata(pdev, cci_df);
> +
> + cci_df->devfreq = devm_devfreq_add_device(cci_dev,
> + &cci_devfreq_profile,
> + "mtk_cci_vmon",
> + NULL);
> + if (IS_ERR(cci_df->devfreq)) {
> + dev_err(cci_dev, "cannot create cci devfreq device\n", ret);
> + goto err_put_reg;
> + }
> +
> + return 0;
> +
> +err_put_reg:
> + regulator_put(cci_df->proc_reg);
> +err_put_clk:
> + clk_put(cci_df->cci_clk);
If you use devm_clk_get()/devm_regulator_get(),
'err_put_reg' and 'err_put_clk' are unneeded.
> +
> + return ret;
> +}
> +
> +static const struct of_device_id mediatek_cci_devfreq_of_match[] = {
> + { .compatible = "mediatek,mt8183-cci" },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, mediatek_cci_devfreq_of_match);
> +
> +static struct platform_driver cci_devfreq_driver = {
> + .probe = mtk_cci_devfreq_probe,
> + .driver = {
> + .name = "mediatek-cci-devfreq",
> + .of_match_table = mediatek_cci_devfreq_of_match,
> + },
> +};
> +
> +static int __init mtk_cci_devfreq_init(void)
> +{
> + int ret;
> +
> + ret = devfreq_add_governor(&mtk_cci_devfreq_governor);
> + if (ret) {
> + pr_err("%s: failed to add governor: %d\n", __func__, ret);
> + return ret;
> + }
> +
> + ret = platform_driver_register(&cci_devfreq_driver);
> + if (ret)
> + devfreq_remove_governor(&mtk_cci_devfreq_governor);
> +
> + return ret;
> +}
> +module_init(mtk_cci_devfreq_init)
> +
> +static void __exit mtk_cci_devfreq_exit(void)
> +{
> + int ret;
> +
> + ret = devfreq_remove_governor(&mtk_cci_devfreq_governor);
> + if (ret)
> + pr_err("%s: failed to remove governor: %d\n", __func__, ret);
> +
> + platform_driver_unregister(&cci_devfreq_driver);
> +}
> +module_exit(mtk_cci_devfreq_exit)
> +
> +MODULE_DESCRIPTION("Mediatek CCI devfreq driver");
> +MODULE_AUTHOR("Andrew-sh.Cheng <andrew-sh.cheng@...iatek.com>");
> +MODULE_LICENSE("GPL v2");
>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
Powered by blists - more mailing lists