linux-kernel - Re: [PATCH v2 2/6] ARM: dts: sun8i: v40: bananapi-m2-berry: Enable GMAC ethernet controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20190416130057.bjaweorywikaa6ig@flea>
Date:   Tue, 16 Apr 2019 15:00:57 +0200
From:   Maxime Ripard <maxime.ripard@...tlin.com>
To:     Pablo Sebastián Greco <pgreco@...tosproject.org>
Cc:     linux-sunxi@...glegroups.com, Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Chen-Yu Tsai <wens@...e.org>, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 2/6] ARM: dts: sun8i: v40: bananapi-m2-berry: Enable
 GMAC ethernet controller

65;5600;1c
On Tue, Apr 16, 2019 at 07:47:09AM -0300, Pablo Sebastián Greco wrote:
>
> El 15/4/19 a las 04:53, Maxime Ripard escribió:
> > On Fri, Apr 12, 2019 at 07:33:01AM -0300, Pablo Greco wrote:
> > > Just like the Bananapi M2 Ultra, the Bananapi M2 Berry has a Realtek
> > > RTL8211E RGMII PHY tied to the GMAC.
> > > The PMIC's DC1SW output provides power for the PHY, while the ALDO2
> > > output provides I/O voltages on both sides.
> > >
> > > Signed-off-by: Pablo Greco <pgreco@...tosproject.org>
> > > ---
> > >   arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts | 30 +++++++++++++++++++++++
> > >   1 file changed, 30 insertions(+)
> > >
> > > diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
> > > index f05cabd..0d79e91 100644
> > > --- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
> > > +++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
> > > @@ -50,6 +50,7 @@
> > >   	compatible = "sinovoip,bpi-m2-berry", "allwinner,sun8i-r40";
> > >
> > >   	aliases {
> > > +		ethernet0 = &gmac;
> > >   		serial0 = &uart0;
> > >   	};
> > >
> > > @@ -92,6 +93,22 @@
> > >   	status = "okay";
> > >   };
> > >
> > > +&gmac {
> > > +	pinctrl-names = "default";
> > > +	pinctrl-0 = <&gmac_rgmii_pins>;
> > > +	phy-handle = <&phy1>;
> > > +	phy-mode = "rgmii";
> > > +	phy-supply = <&reg_dc1sw>;
> > > +	status = "okay";
> > > +};
> > > +
> > > +&gmac_mdio {
> > > +	phy1: ethernet-phy@1 {
> > > +		compatible = "ethernet-phy-ieee802.3-c22";
> > > +		reg = <1>;
> > > +	};
> > > +};
> > > +
> > >   &i2c0 {
> > >   	status = "okay";
> > >
> > > @@ -123,6 +140,13 @@
> > >   	status = "okay";
> > >   };
> > >
> > > +&reg_aldo2 {
> > > +	regulator-always-on;
> > > +	regulator-min-microvolt = <2500000>;
> > > +	regulator-max-microvolt = <2500000>;
> > > +	regulator-name = "vcc-pa";
> > > +};
> > > +
> > If this one provides power to the pins, it should be tied to the PIO
> > node.
>
> In that case, I should fix the bananapi-m2-ultra the same way. Do you prefer
> me to add those fixes to this series?

If you have that board, then please add that yep.

> Or is it better to apply this like it is, and I fix both together in a
> separated series?

No, please resend a new version.

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)