| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAHQ1cqG3SywejRSYi2SE9O9o4k2jfNC0vuxQ1b__otXbTH8K_w@mail.gmail.com>
Date: Fri, 26 Apr 2019 17:29:08 -0700
From: Andrey Smirnov <andrew.smirnov@...il.com>
To: Enric Balletbo Serra <eballetbo@...il.com>
Cc: Linux PM list <linux-pm@...r.kernel.org>,
Chris Health <cphealy@...il.com>,
Lucas Stach <l.stach@...gutronix.de>,
Fabio Estevam <fabio.estevam@....com>,
Guenter Roeck <linux@...ck-us.net>,
Sebastian Reichel <sre@...nel.org>,
linux-kernel <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 2/3] power: supply: Add driver for Microchip UCS1002
On Fri, Apr 26, 2019 at 9:52 AM Enric Balletbo Serra
<eballetbo@...il.com> wrote:
>
> Hi Andrey,
>
> Many thanks to push this upstream. Actually this the fifth version [1]
> of this patchset. I think that is interesting for the maintainers
> maintain the history and the changelog.
>
> [1] https://lkml.org/lkml/2016/3/14/233
I probably won't change the version numbering of the series at this
point, but I'll definitely add the link above to the cover letter.
>
> Missatge de Andrey Smirnov <andrew.smirnov@...il.com> del dia dc., 17
> d’abr. 2019 a les 10:46:
> >
> > Add driver for Microchip UCS1002 Programmable USB Port Power
> > Controller with Charger Emulation. The driver exposed a power supply
> > device to control/monitor various parameter of the device as well as a
> > regulator to allow controlling VBUS line.
> >
> > Signed-off-by: Andrey Smirnov <andrew.smirnov@...il.com>
> > Cc: Chris Health <cphealy@...il.com>
> > Cc: Lucas Stach <l.stach@...gutronix.de>
> > Cc: Fabio Estevam <fabio.estevam@....com>
> > Cc: Guenter Roeck <linux@...ck-us.net>
> > Cc: Sebastian Reichel <sre@...nel.org>
> > Cc: linux-kernel@...r.kernel.org
> > Cc: linux-pm@...r.kernel.org
> > ---
> > drivers/power/supply/Kconfig | 9 +
> > drivers/power/supply/Makefile | 1 +
> > drivers/power/supply/ucs1002_power.c | 639 +++++++++++++++++++++++++++
> > 3 files changed, 649 insertions(+)
> > create mode 100644 drivers/power/supply/ucs1002_power.c
> >
> > diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
> > index e901b9879e7e..c614c8a196f3 100644
> > --- a/drivers/power/supply/Kconfig
> > +++ b/drivers/power/supply/Kconfig
> > @@ -660,4 +660,13 @@ config FUEL_GAUGE_SC27XX
> > Say Y here to enable support for fuel gauge with SC27XX
> > PMIC chips.
> >
> > +config CHARGER_UCS1002
> > + tristate "Microchip UCS1002 USB Port Power Controller"
> > + depends on I2C
> > + depends on OF
> > + select REGMAP_I2C
> > + help
> > + Say Y to enable support for Microchip UCS1002 Programmable
> > + USB Port Power Controller with Charger Emulation.
> > +
> > endif # POWER_SUPPLY
> > diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
> > index b731c2a9b695..c56803a9e4fe 100644
> > --- a/drivers/power/supply/Makefile
> > +++ b/drivers/power/supply/Makefile
> > @@ -87,3 +87,4 @@ obj-$(CONFIG_AXP288_CHARGER) += axp288_charger.o
> > obj-$(CONFIG_CHARGER_CROS_USBPD) += cros_usbpd-charger.o
> > obj-$(CONFIG_CHARGER_SC2731) += sc2731_charger.o
> > obj-$(CONFIG_FUEL_GAUGE_SC27XX) += sc27xx_fuel_gauge.o
> > +obj-$(CONFIG_CHARGER_UCS1002) += ucs1002_power.o
> > diff --git a/drivers/power/supply/ucs1002_power.c b/drivers/power/supply/ucs1002_power.c
> > new file mode 100644
> > index 000000000000..b0b81d62e003
> > --- /dev/null
> > +++ b/drivers/power/supply/ucs1002_power.c
> > @@ -0,0 +1,639 @@
> > +// SPDX-License-Identifier: GPL-2.0+
>
> There is a license mismatch, or this should be GPL-2.0 or
> MODULE_LICENCE should GPL.
>
OK, will change MODULE_LICENSE to GPL in v2.
> > +/*
> > + * Driver for UCS1002 Programmable USB Port Power Controller
> > + *
> > + * Copyright (C) 2019 Zodiac Inflight Innovations
> > + */
> > +#include <linux/freezer.h>
> > +#include <linux/gpio/consumer.h>
> > +#include <linux/i2c.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/kernel.h>
> > +#include <linux/kthread.h>
> > +#include <linux/device.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_irq.h>
> > +#include <linux/power_supply.h>
> > +#include <linux/regmap.h>
> > +#include <linux/regulator/driver.h>
> > +#include <linux/regulator/of_regulator.h>
> > +
> > +/* UCS1002 Registers */
> > +#define UCS1002_REG_CURRENT_MEASUREMENT 0x00
> > +
> > +/*
> > + * The Total Accumulated Charge registers store the total accumulated
> > + * charge delivered from the VS source to a portable device. The total
> > + * value is calculated using four registers, from 01h to 04h. The bit
> > + * weighting of the registers is given in mA/hrs.
> > + */
> > +#define UCS1002_REG_TOTAL_ACC_CHARGE 0x01
> > +
> > +/* Other Status Register */
> > +#define UCS1002_REG_OTHER_STATUS 0x0f
> > +# define F_ADET_PIN BIT(4)
> > +# define F_CHG_ACT BIT(3)
> > +
> > +/* Interrupt Status */
> > +#define UCS1002_REG_INTERRUPT_STATUS 0x10
> > +# define F_DISCHARGE_ERR BIT(6)
> > +# define F_RESET BIT(5)
> > +# define F_MIN_KEEP_OUT BIT(4)
> > +# define F_TSD BIT(3)
> > +# define F_OVER_VOLT BIT(2)
> > +# define F_BACK_VOLT BIT(1)
> > +# define F_OVER_ILIM BIT(0)
> > +
> > +/* Pin Status Register */
> > +#define UCS1002_REG_PIN_STATUS 0x14
> > +# define UCS1002_PWR_STATE_MASK 0x03
> > +# define F_PWR_EN_PIN BIT(6)
> > +# define F_M2_PIN BIT(5)
> > +# define F_M1_PIN BIT(4)
> > +# define F_EM_EN_PIN BIT(3)
> > +# define F_SEL_PIN BIT(2)
> > +# define F_ACTIVE_MODE_MASK GENMASK(5, 3)
> > +# define F_ACTIVE_MODE_PASSTHROUGH F_M2_PIN
> > +# define F_ACTIVE_MODE_DEDICATED F_EM_EN_PIN
> > +# define F_ACTIVE_MODE_BC12_DCP (F_M2_PIN | F_EM_EN_PIN)
> > +# define F_ACTIVE_MODE_BC12_SDP F_M1_PIN
> > +# define F_ACTIVE_MODE_BC12_CDP (F_M1_PIN | F_M2_PIN | F_EM_EN_PIN)
> > +
> > +/* General Configuration Register */
> > +#define UCS1002_REG_GENERAL_CFG 0x15
> > +# define F_RATION_EN BIT(3)
> > +
> > +/* Emulation Configuration Register */
> > +#define UCS1002_REG_EMU_CFG 0x16
> > +
> > +/* Switch Configuration Register */
> > +#define UCS1002_REG_SWITCH_CFG 0x17
> > +# define F_PIN_IGNORE BIT(7)
> > +# define F_EM_EN_SET BIT(5)
> > +# define F_M2_SET BIT(4)
> > +# define F_M1_SET BIT(3)
> > +# define F_S0_SET BIT(2)
> > +# define F_PWR_EN_SET BIT(1)
> > +# define F_LATCH_SET BIT(0)
> > +# define V_SET_ACTIVE_MODE_MASK GENMASK(5, 3)
> > +# define V_SET_ACTIVE_MODE_PASSTHROUGH F_M2_SET
> > +# define V_SET_ACTIVE_MODE_DEDICATED F_EM_EN_SET
> > +# define V_SET_ACTIVE_MODE_BC12_DCP (F_M2_SET | F_EM_EN_SET)
> > +# define V_SET_ACTIVE_MODE_BC12_SDP F_M1_SET
> > +# define V_SET_ACTIVE_MODE_BC12_CDP (F_M1_SET | F_M2_SET | F_EM_EN_SET)
> > +
> > +/* Current Limit Register */
> > +#define UCS1002_REG_ILIMIT 0x19
> > +# define UCS1002_ILIM_SW_MASK GENMASK(3, 0)
> > +
> > +/* Product ID */
> > +#define UCS1002_REG_PRODUCT_ID 0xfd
> > +# define UCS1002_PRODUCT_ID 0x4e
> > +
> > +/* Manufacture name */
> > +#define UCS1002_MANUFACTURER "SMSC"
> > +
> > +struct ucs1002_info {
> > + struct power_supply *charger;
> > + struct i2c_client *client;
> > + struct regmap *regmap;
> > + struct regulator_desc *regulator_descriptor;
> > + bool present;
> > +};
> > +
> > +static enum power_supply_property ucs1002_props[] = {
> > + POWER_SUPPLY_PROP_ONLINE,
> > + POWER_SUPPLY_PROP_CHARGE_NOW,
> > + POWER_SUPPLY_PROP_CURRENT_NOW,
> > + POWER_SUPPLY_PROP_CURRENT_MAX,
> > + POWER_SUPPLY_PROP_PRESENT, /* the presence of PED */
> > + POWER_SUPPLY_PROP_MANUFACTURER,
> > + POWER_SUPPLY_PROP_USB_TYPE,
> > + POWER_SUPPLY_PROP_HEALTH,
> > +};
> > +
> > +static int ucs1002_get_online(struct ucs1002_info *info,
> > + union power_supply_propval *val)
> > +{
> > + unsigned int reg;
> > + int ret;
> > +
> > + ret = regmap_read(info->regmap, UCS1002_REG_OTHER_STATUS, ®);
> > + if (ret)
> > + return ret;
> > +
> > + val->intval = !!(reg & F_CHG_ACT);
> > +
> > + return 0;
> > +}
> > +
> > +static int ucs1002_get_charge(struct ucs1002_info *info,
> > + union power_supply_propval *val)
> > +{
> > + /*
> > + * To fit within 32 bits some values are rounded (uA/h)
> > + *
> > + * For Total Accumulated Charge Middle Low Byte register, addr
> > + * 03h, byte 2
> > + *
> > + * B0: 0.01084 mA/h rounded to 11 uA/h
> > + * B1: 0.02169 mA/h rounded to 22 uA/h
> > + * B2: 0.04340 mA/h rounded to 43 uA/h
> > + * B3: 0.08676 mA/h rounded to 87 uA/h
> > + * B4: 0.17350 mA/h rounded to 173 uÁ/h
> > + *
> > + * For Total Accumulated Charge Low Byte register, addr 04h,
> > + * byte 3
> > + *
> > + * B6: 0.00271 mA/h rounded to 3 uA/h
> > + * B7: 0.005422 mA/h rounded to 5 uA/h
> > + */
> > + static const int bit_weights_uAh[BITS_PER_TYPE(u32)] = {
> > + 0, 0, 0, 0, 0, 0, 3, 5,
> > +
>
> nit: I personally don't like these empty lines here.
>
I'll add comments to clarify that those represent individual bytes to
replace the empty lines.
> > + 11, 22, 43, 87, 173, 347, 694, 1388,
> > +
> > + 2776, 5552, 11105, 22210, 44420, 88840, 177700, 355400,
> > +
> > + 710700, 1421000, 2843000, 5685000, 11371000, 22742000,
> > + 45484000, 90968000,
> > + };
> > + unsigned long total_acc_charger;
> > + unsigned int reg;
> > + int i, ret;
> > +
> > + ret = regmap_bulk_read(info->regmap, UCS1002_REG_TOTAL_ACC_CHARGE,
> > + ®, sizeof(u32));
> > + if (ret)
> > + return ret;
> > +
> > + total_acc_charger = be32_to_cpu(reg);
> > + val->intval = 0;
> > +
> > + for_each_set_bit(i, &total_acc_charger, ARRAY_SIZE(bit_weights_uAh))
> > + val->intval += bit_weights_uAh[i];
> > +
> > + return 0;
> > +}
> > +
> > +static int ucs1002_get_current(struct ucs1002_info *info,
> > + union power_supply_propval *val)
> > +{
> > + /*
> > + * The Current Measurement register stores the measured
> > + * current value delivered to the portable device. The range
> > + * is from 9.76 mA to 2.5 A.
> > + */
> > + static const int bit_weights_uA[BITS_PER_TYPE(u8)] = {
> > + 9760, 19500, 39000, 78100, 156200, 312300, 624600, 1249300,
> > + };
> > + unsigned long current_measurement;
> > + unsigned int reg;
> > + int i, ret;
> > +
> > + ret = regmap_read(info->regmap, UCS1002_REG_CURRENT_MEASUREMENT, ®);
> > + if (ret)
> > + return ret;
> > +
> > + current_measurement = reg;
> > + val->intval = 0;
> > +
> > + for_each_set_bit(i, ¤t_measurement, ARRAY_SIZE(bit_weights_uA))
> > + val->intval += bit_weights_uA[i];
> > +
> > + return 0;
> > +}
> > +
> > +/*
> > + * The Current Limit register stores the maximum current used by the
> > + * port switch. The range is from 500mA to 2.5 A.
> > + */
> > +static const u32 ucs1002_current_limit_uA[] = {
> > + 500000, 900000, 1000000, 1200000, 1500000, 1800000, 2000000, 2500000,
> > +};
> > +
> > +static int ucs1002_get_max_current(struct ucs1002_info *info,
> > + union power_supply_propval *val)
> > +{
> > + unsigned int reg;
> > + int ret;
> > +
> > + ret = regmap_read(info->regmap, UCS1002_REG_ILIMIT, ®);
> > + if (ret)
> > + return ret;
> > +
> > + val->intval = ucs1002_current_limit_uA[reg & UCS1002_ILIM_SW_MASK];
> > +
> > + return 0;
> > +}
> > +
> > +static int ucs1002_set_max_current(struct ucs1002_info *info, u32 val)
> > +{
> > + unsigned int reg;
> > + int ret, idx;
> > +
> > + for (idx = 0; idx < ARRAY_SIZE(ucs1002_current_limit_uA); idx++) {
> > + if (val == ucs1002_current_limit_uA[idx])
> > + break;
> > + }
> > +
> > + if (idx == ARRAY_SIZE(ucs1002_current_limit_uA)) {
> > + dev_err(&info->client->dev,
> > + "%d is an invalid max current value\n", val);
> > + return -EINVAL;
> > + }
> > +
> > + ret = regmap_write(info->regmap, UCS1002_REG_ILIMIT, idx);
> > + if (ret)
> > + return ret;
> > + /*
> > + * Any current limit setting exceeding the one set via ILIM
> > + * pin will be rejected, so we read out freshly changed limit
> > + * to make sure that it took effect.
> > + */
> > + ret = regmap_read(info->regmap, UCS1002_REG_ILIMIT, ®);
> > + if (ret)
> > + return ret;
> > +
> > + if (reg != idx)
> > + return -EINVAL;
> > +
> > + return 0;
> > +}
> > +
> > +static enum power_supply_usb_type ucs1002_usb_types[] = {
> > + POWER_SUPPLY_USB_TYPE_PD,
> > + POWER_SUPPLY_USB_TYPE_SDP,
> > + POWER_SUPPLY_USB_TYPE_DCP,
> > + POWER_SUPPLY_USB_TYPE_CDP,
> > + POWER_SUPPLY_USB_TYPE_UNKNOWN,
> > +};
> > +
> > +static int ucs1002_set_usb_type(struct ucs1002_info *info, int val)
> > +{
> > + unsigned int mode;
> > +
> > + if (val >= ARRAY_SIZE(ucs1002_usb_types))
> > + return -EINVAL;
> > +
> > + switch (ucs1002_usb_types[val]) {
> > + case POWER_SUPPLY_USB_TYPE_PD:
> > + mode = V_SET_ACTIVE_MODE_DEDICATED;
> > + break;
> > + case POWER_SUPPLY_USB_TYPE_SDP:
> > + mode = V_SET_ACTIVE_MODE_BC12_SDP;
> > + break;
> > + case POWER_SUPPLY_USB_TYPE_DCP:
> > + mode = V_SET_ACTIVE_MODE_BC12_DCP;
> > + break;
> > + case POWER_SUPPLY_USB_TYPE_CDP:
> > + mode = V_SET_ACTIVE_MODE_BC12_CDP;
> > + break;
> > + default:
> > + return -EINVAL;
> > + }
> > +
> > + return regmap_update_bits(info->regmap, UCS1002_REG_SWITCH_CFG,
> > + V_SET_ACTIVE_MODE_MASK, mode);
> > +}
> > +
> > +static int ucs1002_get_usb_type(struct ucs1002_info *info,
> > + union power_supply_propval *val)
> > +{
> > + enum power_supply_usb_type type;
> > + unsigned int reg;
> > + int ret;
> > +
> > + ret = regmap_read(info->regmap, UCS1002_REG_PIN_STATUS, ®);
> > + if (ret)
> > + return ret;
> > +
> > + switch (reg & F_ACTIVE_MODE_MASK) {
> > + default:
> > + type = POWER_SUPPLY_USB_TYPE_UNKNOWN;
> > + break;
> > + case F_ACTIVE_MODE_DEDICATED:
> > + type = POWER_SUPPLY_USB_TYPE_PD;
> > + break;
> > + case F_ACTIVE_MODE_BC12_SDP:
> > + type = POWER_SUPPLY_USB_TYPE_SDP;
> > + break;
> > + case F_ACTIVE_MODE_BC12_DCP:
> > + type = POWER_SUPPLY_USB_TYPE_DCP;
> > + break;
> > + case F_ACTIVE_MODE_BC12_CDP:
> > + type = POWER_SUPPLY_USB_TYPE_CDP;
> > + break;
> > + };
> > +
> > + val->intval = type;
> > +
> > + return 0;
> > +}
> > +
> > +static int ucs1002_get_health(struct ucs1002_info *info,
> > + union power_supply_propval *val)
> > +{
> > + unsigned int reg;
> > + int ret, health;
> > +
> > + ret = regmap_read(info->regmap, UCS1002_REG_INTERRUPT_STATUS, ®);
> > + if (ret)
> > + return ret;
> > +
> > + if (reg & F_TSD)
> > + health = POWER_SUPPLY_HEALTH_OVERHEAT;
> > + else if (reg & (F_OVER_VOLT | F_BACK_VOLT))
> > + health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
> > + else if (reg & F_OVER_ILIM)
> > + health = POWER_SUPPLY_HEALTH_OVERCURRENT;
> > + else if (reg & (F_DISCHARGE_ERR | F_MIN_KEEP_OUT))
> > + health = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
> > + else
> > + health = POWER_SUPPLY_HEALTH_GOOD;
> > +
> > + val->intval = health;
> > +
> > + return 0;
> > +}
> > +
> > +static int ucs1002_get_property(struct power_supply *psy,
> > + enum power_supply_property psp,
> > + union power_supply_propval *val)
> > +{
> > + struct ucs1002_info *info = power_supply_get_drvdata(psy);
> > +
> > + switch (psp) {
> > + case POWER_SUPPLY_PROP_ONLINE:
> > + return ucs1002_get_online(info, val);
> > + case POWER_SUPPLY_PROP_CHARGE_NOW:
> > + return ucs1002_get_charge(info, val);
> > + case POWER_SUPPLY_PROP_CURRENT_NOW:
> > + return ucs1002_get_current(info, val);
> > + case POWER_SUPPLY_PROP_CURRENT_MAX:
> > + return ucs1002_get_max_current(info, val);
> > + case POWER_SUPPLY_PROP_USB_TYPE:
> > + return ucs1002_get_usb_type(info, val);
> > + case POWER_SUPPLY_PROP_HEALTH:
> > + return ucs1002_get_health(info, val);
> > + case POWER_SUPPLY_PROP_PRESENT:
> > + val->intval = info->present;
> > + return 0;
> > + case POWER_SUPPLY_PROP_MANUFACTURER:
> > + val->strval = UCS1002_MANUFACTURER;
> > + return 0;
> > + default:
> > + return -EINVAL;
> > + }
> > +}
> > +
> > +static int ucs1002_set_property(struct power_supply *psy,
> > + enum power_supply_property psp,
> > + const union power_supply_propval *val)
> > +{
> > + struct ucs1002_info *info = power_supply_get_drvdata(psy);
> > +
> > + switch (psp) {
> > + case POWER_SUPPLY_PROP_CURRENT_MAX:
> > + return ucs1002_set_max_current(info, val->intval);
> > + case POWER_SUPPLY_PROP_USB_TYPE:
> > + return ucs1002_set_usb_type(info, val->intval);
> > + default:
> > + return -EINVAL;
> > + }
> > +}
> > +
> > +static int ucs1002_property_is_writeable(struct power_supply *psy,
> > + enum power_supply_property psp)
> > +{
> > + switch (psp) {
> > + case POWER_SUPPLY_PROP_CURRENT_MAX:
> > + case POWER_SUPPLY_PROP_USB_TYPE:
> > + return true;
> > + default:
> > + return false;
> > + }
> > +}
> > +
> > +static const struct power_supply_desc ucs1002_charger_desc = {
> > + .name = "ucs1002",
> > + .type = POWER_SUPPLY_TYPE_USB,
> > + .usb_types = ucs1002_usb_types,
> > + .num_usb_types = ARRAY_SIZE(ucs1002_usb_types),
> > + .get_property = ucs1002_get_property,
> > + .set_property = ucs1002_set_property,
> > + .property_is_writeable = ucs1002_property_is_writeable,
> > + .properties = ucs1002_props,
> > + .num_properties = ARRAY_SIZE(ucs1002_props),
> > +};
> > +
> > +static irqreturn_t ucs1002_charger_irq(int irq, void *data)
> > +{
> > + int ret, regval;
> > + bool present;
> > + struct ucs1002_info *info = data;
> > +
> > + present = info->present;
> > +
> > + ret = regmap_read(info->regmap, UCS1002_REG_OTHER_STATUS, ®val);
> > + if (ret)
> > + return IRQ_HANDLED;
> > +
> > + /* update attached status */
> > + info->present = (regval & F_ADET_PIN) ? true : false;
> > +
> > + /* notify the change */
> > + if (present != info->present)
> > + power_supply_changed(info->charger);
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static irqreturn_t ucs1002_alert_irq(int irq, void *data)
> > +{
> > + struct ucs1002_info *info = data;
> > +
> > + power_supply_changed(info->charger);
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static const struct regulator_ops ucs1002_regulator_ops = {
> > + .is_enabled = regulator_is_enabled_regmap,
> > + .enable = regulator_enable_regmap,
> > + .disable = regulator_disable_regmap,
> > +};
> > +
> > +static const struct regulator_desc ucs1002_regulator_descriptor = {
> > + .name = "ucs1002-vbus",
> > + .ops = &ucs1002_regulator_ops,
> > + .type = REGULATOR_VOLTAGE,
> > + .owner = THIS_MODULE,
> > + .enable_reg = UCS1002_REG_SWITCH_CFG,
> > + .enable_mask = F_PWR_EN_SET,
> > + .enable_val = F_PWR_EN_SET,
> > + .fixed_uV = 5000000,
> > + .n_voltages = 1,
> > +};
> > +
> > +static int ucs1002_probe(struct i2c_client *client,
> > + const struct i2c_device_id *dev_id)
> > +{
> > + struct device *dev = &client->dev;
> > + struct power_supply_config charger_config = {};
> > + const struct regmap_config regmap_config = {
> > + .reg_bits = 8,
> > + .val_bits = 8,
> > + };
> > + struct regulator_config regulator_config = {};
> > + int irq_a_det, irq_alert, ret;
> > + struct regulator_dev *rdev;
> > + struct ucs1002_info *info;
> > + unsigned int regval;
> > +
> > + info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
> > + if (!info)
> > + return -ENOMEM;
> > +
> > + info->regmap = devm_regmap_init_i2c(client, ®map_config);
> > + if (IS_ERR(info->regmap)) {
> > + ret = PTR_ERR(info->regmap);
> > + dev_err(dev, "regmap initialization failed: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + info->client = client;
> > +
> > + irq_a_det = of_irq_get_byname(dev->of_node, "a_det");
> > + irq_alert = of_irq_get_byname(dev->of_node, "alert");
> > +
> > + charger_config.of_node = dev->of_node;
> > + charger_config.drv_data = info;
> > +
> > + ret = regmap_read(info->regmap, UCS1002_REG_PRODUCT_ID, ®val);
> > + if (ret)
> > + return ret;
> > +
> > + if (regval != UCS1002_PRODUCT_ID) {
> > + dev_err(dev,
> > + "Product ID does not match (0x%02x != 0x%02x)\n",
> > + regval, UCS1002_PRODUCT_ID);
> > + return -ENODEV;
> > + }
> > +
> > + dev_info(dev, "registered with product id 0x%02x\n", regval);
> > +
> > + /* Enable charge rationing by default */
> > + ret = regmap_update_bits(info->regmap, UCS1002_REG_GENERAL_CFG,
> > + F_RATION_EN, F_RATION_EN);
> > + if (ret)
> > + return ret;
> > +
> > + dev_dbg(dev, "set active mode selection through i2c\n");
> > + /*
> > + * Ignore the M1, M2, PWR_EN, and EM_EN pin states. Set active
> > + * mode selection to Dedicated Charger Emulation Cycle.
> > + *
> > + * #M1 #M2 EM_EN
> > + * 0 0 1 - Dedicated Charger Emulation Cycle
> > + *
> > + */
> > + ret = regmap_update_bits(info->regmap, UCS1002_REG_SWITCH_CFG,
> > + F_PIN_IGNORE | F_EM_EN_SET | F_M2_SET |
> > + F_M1_SET, F_PIN_IGNORE | F_EM_EN_SET);
> > + if (ret)
> > + return ret;
> > + /*
> > + * Be safe and set initial current limit to 500mA
> > + */
> > + ret = ucs1002_set_max_current(info, 500000);
> > + if (ret) {
> > + dev_err(dev, "Failed to read max current default\n");
> > + return ret;
> > + }
> > +
> > + info->charger = devm_power_supply_register(dev, &ucs1002_charger_desc,
> > + &charger_config);
> > + if (IS_ERR(info->charger)) {
> > + dev_err(dev, "failed to register power supply\n");
> > + return PTR_ERR(info->charger);
> > + }
> > +
> > + ret = regmap_read(info->regmap, UCS1002_REG_PIN_STATUS, ®val);
> > + if (ret)
> > + return ret;
> > +
> > + info->regulator_descriptor =
> > + devm_kmemdup(dev, &ucs1002_regulator_descriptor,
> > + sizeof(ucs1002_regulator_descriptor),
> > + GFP_KERNEL);
> > + info->regulator_descriptor->enable_is_inverted = !(regval & F_SEL_PIN);
> > +
> > + regulator_config.dev = dev;
> > + regulator_config.of_node = dev->of_node;
> > + regulator_config.regmap = info->regmap;
> > +
> > + rdev = devm_regulator_register(dev, info->regulator_descriptor,
> > + ®ulator_config);
> > + if (IS_ERR(rdev)) {
> > + dev_err(dev, "failed to register VBUS regulator\n");
> > + return PTR_ERR(rdev);
> > + }
> > +
> > + if (irq_a_det > 0) {
> > + ret = devm_request_threaded_irq(dev, irq_a_det, NULL,
> > + ucs1002_charger_irq,
> > + IRQF_TRIGGER_FALLING |
> > + IRQF_TRIGGER_RISING |
> > + IRQF_ONESHOT,
> > + "ucs1002-a_det", info);
> > + if (ret) {
> > + dev_err(dev, "failed to request A_DET threaded irq\n");
> > + return ret;
> > + }
> > + }
> > +
> > + if (irq_alert > 0) {
> > + ret = devm_request_threaded_irq(dev, irq_alert, NULL,
> > + ucs1002_alert_irq,
> > + IRQF_TRIGGER_FALLING |
> > + IRQF_TRIGGER_RISING |
> > + IRQF_ONESHOT,
> > + "ucs1002-alert", info);
> > + if (ret) {
> > + dev_err(dev, "failed to request ALERT threaded irq\n");
> > + return ret;
> > + }
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +#if IS_ENABLED(CONFIG_OF)
>
> This driver is DT only, this if is not needed.
>
Missed this, will drop in v2.
> > +static const struct of_device_id ucs1002_of_match[] = {
> > + { .compatible = "microchip,ucs1002", },
> > + { /* sentinel */ },
> > +};
> > +MODULE_DEVICE_TABLE(of, ucs1002_of_match);
> > +#endif
> > +
> > +static const struct i2c_device_id ucs1002_ids[] = {
> > + {"ucs1002", 0},
> > + { /* sentinel */ },
> > +};
> > +MODULE_DEVICE_TABLE(i2c, ucs1002_ids);
> > +
> > +static struct i2c_driver ucs1002_driver = {
> > + .driver = {
> > + .name = "ucs1002",
> > + .of_match_table = of_match_ptr(ucs1002_of_match),
>
> No need to use of_match_ptr, is DT-only.
>
Ditto.
> > + },
> > + .probe = ucs1002_probe,
> > +};
> > +module_i2c_driver(ucs1002_driver);
> > +
> > +MODULE_DESCRIPTION("Microchip UCS1002 Programmable USB Port Power Controller");
> > +MODULE_AUTHOR("Enric Balletbo Serra <enric.balletbo@...labora.com>");
>
> I'm not sure how much differs this patch from the one I sent 3 years
> ago ... but if i'm the author or co-author you should add the
> signed-off-by.
>
> [1] https://lkml.org/lkml/2016/3/14/233
> [2] https://www.spinics.net/lists/devicetree/msg122745.html
>
Yeah, you're right. Will add in v2.
Thanks,
Andrey Smirnov
Powered by blists - more mailing lists