| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190502045631.229386-1-drinkcat@chromium.org>
Date: Thu, 2 May 2019 12:56:29 +0800
From: Nicolas Boichat <drinkcat@...omium.org>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: Mathias Nyman <mathias.nyman@...el.com>,
Matthias Brugger <matthias.bgg@...il.com>,
linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org,
Khuong Dinh <khuong@...amperecomputing.com>,
Hoan Tran <hoan@...amperecomputing.com>
Subject: [PATCH 1/2] usb: xhci: Make it possible to not have a secondary HCD (3.0)
Some XHCI controllers may not have any USB 3.0 port, in this case, it
is not useful to create add hcd->shared_hcd, which has 2 main
downsides:
- A useless USB 3.0 root hub is created.
- A warning is thrown on boot:
hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
The change is mostly about checking if hcd->shared_hcd is NULL before
accessing it. The one special case is in xhci_run, where we need to
call xhci_run_finished immediately, if there is no secondary hcd.
Signed-off-by: Nicolas Boichat <drinkcat@...omium.org>
---
This is a respin of https://lore.kernel.org/patchwork/patch/863993/,
hopefully addressing the comments there. Note that I dropped the change
in xhci-plat.c, as I do not have a device to test it, but made a
similar change in xhci-mtk.c, in the next patch.
(the @apm.com addresses seem to bounce, so I added some
@amperecomputing.com instead, if somebody there can track back the
original issue, I'm happy to provide a patch for xhci-plat.c as well)
drivers/usb/host/xhci-hub.c | 7 ++++--
drivers/usb/host/xhci.c | 45 +++++++++++++++++++++++++++----------
2 files changed, 38 insertions(+), 14 deletions(-)
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 3abe70ff1b1e2af..9a9c5a63ae57c6d 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -627,8 +627,11 @@ static int xhci_enter_test_mode(struct xhci_hcd *xhci,
/* Put all ports to the Disable state by clear PP */
xhci_dbg(xhci, "Disable all port (PP = 0)\n");
/* Power off USB3 ports*/
- for (i = 0; i < xhci->usb3_rhub.num_ports; i++)
- xhci_set_port_power(xhci, xhci->shared_hcd, i, false, flags);
+ if (xhci->shared_hcd) {
+ for (i = 0; i < xhci->usb3_rhub.num_ports; i++)
+ xhci_set_port_power(xhci, xhci->shared_hcd, i, false,
+ flags);
+ }
/* Power off USB2 ports*/
for (i = 0; i < xhci->usb2_rhub.num_ports; i++)
xhci_set_port_power(xhci, xhci->main_hcd, i, false, flags);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index a9bb796794e3937..a2cf715c53f2164 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -523,6 +523,10 @@ static void compliance_mode_recovery(struct timer_list *t)
*/
static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci)
{
+ /* No compliance mode recovery needed if there is no USB 3.0 hcd. */
+ if (!xhci->shared_hcd)
+ return;
+
xhci->port_status_u0 = 0;
timer_setup(&xhci->comp_mode_recovery_timer, compliance_mode_recovery,
0);
@@ -610,7 +614,8 @@ static int xhci_run_finished(struct xhci_hcd *xhci)
xhci_halt(xhci);
return -ENODEV;
}
- xhci->shared_hcd->state = HC_STATE_RUNNING;
+ if (xhci->shared_hcd)
+ xhci->shared_hcd->state = HC_STATE_RUNNING;
xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
if (xhci->quirks & XHCI_NEC_HOST)
@@ -698,6 +703,10 @@ int xhci_run(struct usb_hcd *hcd)
xhci_debugfs_init(xhci);
+ /* There is no secondary HCD, start the host controller immediately. */
+ if (!xhci->shared_hcd)
+ return xhci_run_finished(xhci);
+
return 0;
}
EXPORT_SYMBOL_GPL(xhci_run);
@@ -984,7 +993,8 @@ int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup)
return 0;
if (hcd->state != HC_STATE_SUSPENDED ||
- xhci->shared_hcd->state != HC_STATE_SUSPENDED)
+ (xhci->shared_hcd &&
+ xhci->shared_hcd->state != HC_STATE_SUSPENDED))
return -EINVAL;
xhci_dbc_suspend(xhci);
@@ -997,15 +1007,18 @@ int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup)
xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
del_timer_sync(&hcd->rh_timer);
- clear_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
- del_timer_sync(&xhci->shared_hcd->rh_timer);
+ if (xhci->shared_hcd) {
+ clear_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
+ del_timer_sync(&xhci->shared_hcd->rh_timer);
+ }
if (xhci->quirks & XHCI_SUSPEND_DELAY)
usleep_range(1000, 1500);
spin_lock_irq(&xhci->lock);
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
- clear_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
+ if (xhci->shared_hcd)
+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
/* step 1: stop endpoint */
/* skipped assuming that port suspend has done */
@@ -1103,7 +1116,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
msleep(100);
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
- set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
+ if (xhci->shared_hcd)
+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
spin_lock_irq(&xhci->lock);
if ((xhci->quirks & XHCI_RESET_ON_RESUME) || xhci->broken_suspend)
@@ -1145,7 +1159,9 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
/* Let the USB core know _both_ roothubs lost power. */
usb_root_hub_lost_power(xhci->main_hcd->self.root_hub);
- usb_root_hub_lost_power(xhci->shared_hcd->self.root_hub);
+ if (xhci->shared_hcd)
+ usb_root_hub_lost_power(
+ xhci->shared_hcd->self.root_hub);
xhci_dbg(xhci, "Stop HCD\n");
xhci_halt(xhci);
@@ -1185,10 +1201,12 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
retval = xhci_run(hcd->primary_hcd);
if (!retval) {
xhci_dbg(xhci, "Start the secondary HCD\n");
- retval = xhci_run(secondary_hcd);
+ if (secondary_hcd)
+ retval = xhci_run(secondary_hcd);
}
hcd->state = HC_STATE_SUSPENDED;
- xhci->shared_hcd->state = HC_STATE_SUSPENDED;
+ if (xhci->shared_hcd)
+ xhci->shared_hcd->state = HC_STATE_SUSPENDED;
goto done;
}
@@ -1216,7 +1234,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
if (retval == 0) {
/* Resume root hubs only when have pending events. */
if (xhci_pending_portevent(xhci)) {
- usb_hcd_resume_root_hub(xhci->shared_hcd);
+ if (xhci->shared_hcd)
+ usb_hcd_resume_root_hub(xhci->shared_hcd);
usb_hcd_resume_root_hub(hcd);
}
}
@@ -1235,8 +1254,10 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
/* Re-enable port polling. */
xhci_dbg(xhci, "%s: starting port polling.\n", __func__);
- set_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
- usb_hcd_poll_rh_status(xhci->shared_hcd);
+ if (xhci->shared_hcd) {
+ set_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
+ usb_hcd_poll_rh_status(xhci->shared_hcd);
+ }
set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
usb_hcd_poll_rh_status(hcd);
--
2.21.0.593.g511ec345e18-goog
Powered by blists - more mailing lists