linux-kernel - Re: [PATCH v3 0/6] Add drive-strength in Meson pinctrl driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAFBinCBeqW7NLyFygB5vi5a+KGcez8q5Hy1e7MdHmaWLv7KmkA@mail.gmail.com>
Date:   Tue, 7 May 2019 20:03:15 +0200
From:   Martin Blumenstingl <martin.blumenstingl@...glemail.com>
To:     Guillaume La Roque <glaroque@...libre.com>
Cc:     linus.walleij@...aro.org, robh+dt@...nel.org, mark.rutland@....com,
        khilman@...libre.com, linux-gpio@...r.kernel.org,
        linux-amlogic@...ts.infradead.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org
Subject: Re: [PATCH v3 0/6] Add drive-strength in Meson pinctrl driver

On Tue, May 7, 2019 at 1:57 PM Guillaume La Roque <glaroque@...libre.com> wrote:
>
> The purpose of this patchset is to add drive-strength support in meson pinconf
> driver. This is a new feature that was added on the g12a. It is critical for us
> to support this since many functions are failing with default pad drive-strength.
>
> The value achievable by the SoC are 0.5mA, 2.5mA, 3mA and 4mA and the DT property
> 'drive-strength' is expressed in mA.
> So this patch add another generic property "drive-strength-uA". The change to do so
> would be minimal and could be benefit to other platforms later on.
>
> Cheers
> Guillaume
>
> Changes since v2:
> - update driver-strength-uA property to be compliant with DT documentation
> - rework patch series for better understanding
> - rework set_bias function
>
> Changes since v1:
> - fix missing break
> - implement new pinctrl generic property "drive-strength-uA"
>
> [1] https://lkml.kernel.org/r/20190314163725.7918-1-jbrunet@baylibre.com
>
>
> Guillaume La Roque (6):
>   dt-bindings: pinctrl: add a 'drive-strength-microamp' property
>   pinctrl: generic: add new 'drive-strength-microamp' property support
>   dt-bindings: pinctrl: meson: Add drive-strength-microamp property
>   pinctrl: meson: Rework enable/disable bias part
>   pinctrl: meson: add support of drive-strength-microamp
>   pinctrl: meson: g12a: add DS bank value
>
>  .../bindings/pinctrl/meson,pinctrl.txt        |   4 +
>  .../bindings/pinctrl/pinctrl-bindings.txt     |   3 +
>  drivers/pinctrl/meson/pinctrl-meson-g12a.c    |  36 ++--
>  drivers/pinctrl/meson/pinctrl-meson.c         | 177 +++++++++++++++---
>  drivers/pinctrl/meson/pinctrl-meson.h         |  18 +-
>  drivers/pinctrl/pinconf-generic.c             |   2 +
>  include/linux/pinctrl/pinconf-generic.h       |   3 +
>  7 files changed, 195 insertions(+), 48 deletions(-)
I gave this a go on one of my Meson8m2 boards:
[Meson8m2 doesn't support drive strength and still boots without any
crashes or obvious regressions]
Tested-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>