| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190507114905.GB29524@dell>
Date: Tue, 7 May 2019 12:49:05 +0100
From: Lee Jones <lee.jones@...aro.org>
To: Esben Haabendal <esben@...nix.com>
Cc: linux-serial@...r.kernel.org,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jslaby@...e.com>, Nishanth Menon <nm@...com>,
Vignesh R <vigneshr@...com>, Tony Lindgren <tony@...mide.com>,
Lokesh Vutla <lokeshvutla@...com>,
Florian Fainelli <f.fainelli@...il.com>,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/2] serial: 8250: Add support for 8250/16550 as MFD
function
On Fri, 26 Apr 2019, Esben Haabendal wrote:
> The serial8250-mfd driver is for adding 8250/16550 UART ports as functions
> to an MFD driver.
>
> When calling mfd_add_device(), platform_data should be a pointer to a
> struct plat_serial8250_port, with proper settings like .flags, .type,
> .iotype, .regshift and .uartclk. Memory (or ioport) and IRQ should be
> passed as cell resources.
What? No, please!
If you *must* create a whole driver just to be able to use
platform_*() helpers (which I don't think you should), then please
call it something else. This doesn't have anything to do with MFD.
> Do not include UPF_BOOT_AUTOCONF in platform_data.flags.
>
> Signed-off-by: Esben Haabendal <esben@...nix.com>
> ---
> drivers/tty/serial/8250/8250_mfd.c | 119 +++++++++++++++++++++++++++++++++++++
> drivers/tty/serial/8250/Kconfig | 12 ++++
> drivers/tty/serial/8250/Makefile | 1 +
> 3 files changed, 132 insertions(+)
> create mode 100644 drivers/tty/serial/8250/8250_mfd.c
>
> diff --git a/drivers/tty/serial/8250/8250_mfd.c b/drivers/tty/serial/8250/8250_mfd.c
> new file mode 100644
> index 0000000..eae1566
> --- /dev/null
> +++ b/drivers/tty/serial/8250/8250_mfd.c
> @@ -0,0 +1,119 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Serial Port driver for 8250/16550-type MFD sub devices
> + *
> + * This mimics the serial8250_probe of 8250_core.c, while allowing
> + * use without UPF_BOOT_AUTOCONF, which is problematic for MFD, as
> + * the request_mem_region() will typically fail as the region is
> + * already requested by the MFD device.
> + *
> + * Memory and irq are passed as platform resources, which allows easy
> + * use together with (devm_)mfd_add_devices().
> + *
> + * Other parameters are passed as struct plat_serial8250_port in
> + * device platform_data.
> + */
> +
> +#include <linux/platform_device.h>
> +#include <linux/module.h>
> +#include <linux/io.h>
> +#include <linux/serial_8250.h>
> +
> +struct serial8250_mfd_data {
> + int line;
> +};
> +
> +static int serial8250_mfd_probe(struct platform_device *pdev)
> +{
> + struct plat_serial8250_port *pdata = dev_get_platdata(&pdev->dev);
> + struct serial8250_mfd_data *data;
> + struct uart_8250_port up;
> + struct resource *r;
> + void __iomem *membase;
> +
> + if (!pdata)
> + return -ENODEV;
> +
> + memset(&up, 0, sizeof(up));
> +
> + switch (pdata->iotype) {
> + case UPIO_AU:
> + case UPIO_TSI:
> + case UPIO_MEM32:
> + case UPIO_MEM32BE:
> + case UPIO_MEM16:
> + case UPIO_MEM:
> + r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!r)
> + return -ENODEV;
> + membase = devm_ioremap_nocache(&pdev->dev,
> + r->start, resource_size(r));
> + if (!membase)
> + return -ENOMEM;
> + up.port.mapbase = r->start;
> + up.port.membase = membase;
> + break;
> + case UPIO_HUB6:
> + case UPIO_PORT:
> + r = platform_get_resource(pdev, IORESOURCE_IO, 0);
> + if (!r)
> + return -ENODEV;
> + up.port.iobase = r->start;
> + break;
> + }
> +
> + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + up.port.irq = platform_get_irq(pdev, 0);
> + if (up.port.irq < 0)
> + up.port.irq = 0; /* no interrupt -> use polling */
> +
> + /* Register with 8250_core.c */
> + up.port.irqflags = pdata->irqflags;
> + up.port.uartclk = pdata->uartclk;
> + up.port.regshift = pdata->regshift;
> + up.port.iotype = pdata->iotype;
> + up.port.flags = pdata->flags;
> + up.port.hub6 = pdata->hub6;
> + up.port.private_data = pdata->private_data;
> + up.port.type = pdata->type;
> + up.port.serial_in = pdata->serial_in;
> + up.port.serial_out = pdata->serial_out;
> + up.port.handle_irq = pdata->handle_irq;
> + up.port.handle_break = pdata->handle_break;
> + up.port.set_termios = pdata->set_termios;
> + up.port.set_ldisc = pdata->set_ldisc;
> + up.port.get_mctrl = pdata->get_mctrl;
> + up.port.pm = pdata->pm;
> + up.port.dev = &pdev->dev;
> + data->line = __serial8250_register_8250_port(&up, 0);
> + if (data->line < 0)
> + return data->line;
> +
> + platform_set_drvdata(pdev, data);
> + return 0;
> +}
> +
> +static int serial8250_mfd_remove(struct platform_device *pdev)
> +{
> + struct serial8250_mfd_data *data = platform_get_drvdata(pdev);
> +
> + serial8250_unregister_port(data->line);
> + return 0;
> +}
> +
> +static struct platform_driver serial8250_mfd_driver = {
> + .probe = serial8250_mfd_probe,
> + .remove = serial8250_mfd_remove,
> + .driver = {
> + .name = "serial8250-mfd",
> + },
> +};
> +
> +module_platform_driver(serial8250_mfd_driver);
> +
> +MODULE_AUTHOR("Esben Haabendal <esben@...nix.com>");
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("Driver for 8250/16550-type MFD sub devices");
> diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
> index 15c2c54..ef1572b 100644
> --- a/drivers/tty/serial/8250/Kconfig
> +++ b/drivers/tty/serial/8250/Kconfig
> @@ -58,6 +58,18 @@ config SERIAL_8250_PNP
> This builds standard PNP serial support. You may be able to
> disable this feature if you only need legacy serial support.
>
> +config SERIAL_8250_MFD
> + bool "8250/16550 MFD function support"
> + depends on SERIAL_8250 && MFD_CORE
> + default n
> + help
> + This builds support for using 8250/16550-type UARTs as MFD
> + functions.
> +
> + MFD drivers needing this should select it automatically.
> +
> + If unsure, say N.
> +
> config SERIAL_8250_FINTEK
> bool "Support for Fintek F81216A LPC to 4 UART RS485 API"
> depends on SERIAL_8250
> diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
> index 18751bc..da8e139 100644
> --- a/drivers/tty/serial/8250/Makefile
> +++ b/drivers/tty/serial/8250/Makefile
> @@ -6,6 +6,7 @@
> obj-$(CONFIG_SERIAL_8250) += 8250.o 8250_base.o
> 8250-y := 8250_core.o
> 8250-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o
> +8250-$(CONFIG_SERIAL_8250_MFD) += 8250_mfd.o
> 8250_base-y := 8250_port.o
> 8250_base-$(CONFIG_SERIAL_8250_DMA) += 8250_dma.o
> 8250_base-$(CONFIG_SERIAL_8250_FINTEK) += 8250_fintek.o
--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
Powered by blists - more mailing lists