[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1557654739-12564-3-git-send-email-Anson.Huang@nxp.com>
Date: Sun, 12 May 2019 09:57:27 +0000
From: Anson Huang <anson.huang@....com>
To: "robh+dt@...nel.org" <robh+dt@...nel.org>,
"mark.rutland@....com" <mark.rutland@....com>,
"shawnguo@...nel.org" <shawnguo@...nel.org>,
"s.hauer@...gutronix.de" <s.hauer@...gutronix.de>,
"kernel@...gutronix.de" <kernel@...gutronix.de>,
"festevam@...il.com" <festevam@...il.com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
CC: dl-linux-imx <linux-imx@....com>
Subject: [PATCH RESEND 3/5] ARM: dts: imx6sl-evk: Assign corresponding power
supply for LDOs
On i.MX6SL EVK board, sw2 supplies vdd1p1/vdd2p5/vdd3p0 LDO, this
patch assigns corresponding power supply for vdd1p1/vdd2p5/vdd3p0
to avoid confusion by below log:
vdd1p1: supplied by regulator-dummy
vdd3p0: supplied by regulator-dummy
vdd2p5: supplied by regulator-dummy
With this patch, the power supply is more accurate:
vdd1p1: supplied by SW2
vdd3p0: supplied by SW2
vdd2p5: supplied by SW2
Signed-off-by: Anson Huang <Anson.Huang@....com>
---
No code change, just resend patch with correct encoding.
---
arch/arm/boot/dts/imx6sl-evk.dts | 12 ++++++++++++
arch/arm/boot/dts/imx6sl.dtsi | 6 +++---
2 files changed, 15 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index f7a48e4..4829aa6 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -580,6 +580,18 @@
status = "okay";
};
+®_vdd1p1 {
+ vin-supply = <&sw2_reg>;
+};
+
+®_vdd3p0 {
+ vin-supply = <&sw2_reg>;
+};
+
+®_vdd2p5 {
+ vin-supply = <&sw2_reg>;
+};
+
&snvs_poweroff {
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 9393f03..b36fc01 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -531,7 +531,7 @@
<0 54 IRQ_TYPE_LEVEL_HIGH>,
<0 127 IRQ_TYPE_LEVEL_HIGH>;
- regulator-1p1 {
+ reg_vdd1p1: regulator-1p1 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd1p1";
regulator-min-microvolt = <1000000>;
@@ -546,7 +546,7 @@
anatop-enable-bit = <0>;
};
- regulator-3p0 {
+ reg_vdd3p0: regulator-3p0 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd3p0";
regulator-min-microvolt = <2800000>;
@@ -561,7 +561,7 @@
anatop-enable-bit = <0>;
};
- regulator-2p5 {
+ reg_vdd2p5: regulator-2p5 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd2p5";
regulator-min-microvolt = <2250000>;
--
2.7.4
Powered by blists - more mailing lists