lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1557654739-12564-4-git-send-email-Anson.Huang@nxp.com>
Date:   Sun, 12 May 2019 09:57:31 +0000
From:   Anson Huang <anson.huang@....com>
To:     "robh+dt@...nel.org" <robh+dt@...nel.org>,
        "mark.rutland@....com" <mark.rutland@....com>,
        "shawnguo@...nel.org" <shawnguo@...nel.org>,
        "s.hauer@...gutronix.de" <s.hauer@...gutronix.de>,
        "kernel@...gutronix.de" <kernel@...gutronix.de>,
        "festevam@...il.com" <festevam@...il.com>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
CC:     dl-linux-imx <linux-imx@....com>
Subject: [PATCH RESEND 4/5] ARM: dts: imx6sll-evk: Assign corresponding power
 supply for vdd3p0

On i.MX6SLL EVK board, sw2 supplies vdd3p0 LDO, this patch assigns
corresponding power supply for vdd3p0 to avoid confusion by below log:

vdd3p0: supplied by regulator-dummy

With this patch, the power supply is more accurate:

vdd3p0: supplied by SW2

Signed-off-by: Anson Huang <Anson.Huang@....com>
---
No code change, just resend patch with correct encoding.
---
 arch/arm/boot/dts/imx6sll-evk.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts
index 4a31a41..78809ea 100644
--- a/arch/arm/boot/dts/imx6sll-evk.dts
+++ b/arch/arm/boot/dts/imx6sll-evk.dts
@@ -265,6 +265,10 @@
 	status = "okay";
 };
 
+&reg_3p0 {
+	vin-supply = <&sw2_reg>;
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-- 
2.7.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ