| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <DB3PR0402MB3916BDD870608F0CAC76DB3FF50A0@DB3PR0402MB3916.eurprd04.prod.outlook.com>
Date: Thu, 16 May 2019 02:53:39 +0000
From: Anson Huang <anson.huang@....com>
To: Anson Huang <anson.huang@....com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"mark.rutland@....com" <mark.rutland@....com>,
"shawnguo@...nel.org" <shawnguo@...nel.org>,
"s.hauer@...gutronix.de" <s.hauer@...gutronix.de>,
"kernel@...gutronix.de" <kernel@...gutronix.de>,
"festevam@...il.com" <festevam@...il.com>,
"catalin.marinas@....com" <catalin.marinas@....com>,
"will.deacon@....com" <will.deacon@....com>,
"rui.zhang@...el.com" <rui.zhang@...el.com>,
"edubezval@...il.com" <edubezval@...il.com>,
"daniel.lezcano@...aro.org" <daniel.lezcano@...aro.org>,
Aisheng Dong <aisheng.dong@....com>,
"ulf.hansson@...aro.org" <ulf.hansson@...aro.org>,
Daniel Baluta <daniel.baluta@....com>,
Peng Fan <peng.fan@....com>,
"heiko@...ech.de" <heiko@...ech.de>,
"horms+renesas@...ge.net.au" <horms+renesas@...ge.net.au>,
"agross@...nel.org" <agross@...nel.org>,
"olof@...om.net" <olof@...om.net>,
"bjorn.andersson@...aro.org" <bjorn.andersson@...aro.org>,
"jagan@...rulasolutions.com" <jagan@...rulasolutions.com>,
"enric.balletbo@...labora.com" <enric.balletbo@...labora.com>,
"marc.w.gonzalez@...e.fr" <marc.w.gonzalez@...e.fr>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-pm@...r.kernel.org" <linux-pm@...r.kernel.org>
CC: dl-linux-imx <linux-imx@....com>
Subject: RE: [PATCH V12 3/5] thermal: imx_sc: add i.MX system controller
thermal support
Ping...
> -----Original Message-----
> From: Anson Huang
> Sent: Thursday, May 9, 2019 9:44 AM
> To: 'Anson Huang' <Anson.Huang@....com>; robh+dt@...nel.org;
> mark.rutland@....com; shawnguo@...nel.org; s.hauer@...gutronix.de;
> kernel@...gutronix.de; festevam@...il.com; catalin.marinas@....com;
> will.deacon@....com; rui.zhang@...el.com; edubezval@...il.com;
> daniel.lezcano@...aro.org; Aisheng Dong <aisheng.dong@....com>;
> ulf.hansson@...aro.org; Daniel Baluta <daniel.baluta@....com>; Peng Fan
> <peng.fan@....com>; heiko@...ech.de; horms+renesas@...ge.net.au;
> agross@...nel.org; olof@...om.net; bjorn.andersson@...aro.org;
> jagan@...rulasolutions.com; enric.balletbo@...labora.com;
> marc.w.gonzalez@...e.fr; devicetree@...r.kernel.org; linux-
> kernel@...r.kernel.org; linux-arm-kernel@...ts.infradead.org; linux-
> pm@...r.kernel.org
> Cc: dl-linux-imx <linux-imx@....com>
> Subject: RE: [PATCH V12 3/5] thermal: imx_sc: add i.MX system controller
> thermal support
>
> Ping...
>
> > -----Original Message-----
> > From: Anson Huang [mailto:Anson.Huang@....com]
> > Sent: Tuesday, April 16, 2019 11:22 AM
> > To: robh+dt@...nel.org; mark.rutland@....com; shawnguo@...nel.org;
> > s.hauer@...gutronix.de; kernel@...gutronix.de; festevam@...il.com;
> > catalin.marinas@....com; will.deacon@....com; rui.zhang@...el.com;
> > edubezval@...il.com; daniel.lezcano@...aro.org; Aisheng Dong
> > <aisheng.dong@....com>; ulf.hansson@...aro.org; Daniel Baluta
> > <daniel.baluta@....com>; Peng Fan <peng.fan@....com>;
> heiko@...ech.de;
> > horms+renesas@...ge.net.au; agross@...nel.org; olof@...om.net;
> > bjorn.andersson@...aro.org; jagan@...rulasolutions.com;
> > enric.balletbo@...labora.com; marc.w.gonzalez@...e.fr;
> > devicetree@...r.kernel.org; linux-kernel@...r.kernel.org; linux-arm-
> > kernel@...ts.infradead.org; linux-pm@...r.kernel.org
> > Cc: dl-linux-imx <linux-imx@....com>
> > Subject: [PATCH V12 3/5] thermal: imx_sc: add i.MX system controller
> > thermal support
> >
> > i.MX8QXP is an ARMv8 SoC which has a Cortex-M4 system controller
> > inside, the system controller is in charge of controlling power, clock
> > and thermal sensors etc..
> >
> > This patch adds i.MX system controller thermal driver support, Linux
> > kernel has to communicate with system controller via MU (message unit)
> > IPC to get each thermal sensor's temperature, it supports multiple
> > sensors which are passed from device tree, please see the binding doc for
> details.
> >
> > Signed-off-by: Anson Huang <Anson.Huang@....com>
> > ---
> > Changes since V11:
> > - move the API of getting thermal zone sensor ID to of-thermal.c as
> > generic API;
> > - remove unnecessary __packed.
> > ---
> > drivers/thermal/Kconfig | 11 ++++
> > drivers/thermal/Makefile | 1 +
> > drivers/thermal/imx_sc_thermal.c | 137
> > +++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 149 insertions(+)
> > create mode 100644 drivers/thermal/imx_sc_thermal.c
> >
> > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index
> > 653aa27..4e4fa7e 100644
> > --- a/drivers/thermal/Kconfig
> > +++ b/drivers/thermal/Kconfig
> > @@ -223,6 +223,17 @@ config IMX_THERMAL
> > cpufreq is used as the cooling device to throttle CPUs when the
> > passive trip is crossed.
> >
> > +config IMX_SC_THERMAL
> > + tristate "Temperature sensor driver for NXP i.MX SoCs with System
> > Controller"
> > + depends on (ARCH_MXC && IMX_SCU) || COMPILE_TEST
> > + depends on OF
> > + help
> > + Support for Temperature Monitor (TEMPMON) found on NXP i.MX
> > SoCs with
> > + system controller inside, Linux kernel has to communicate with
> > system
> > + controller via MU (message unit) IPC to get temperature from
> > thermal
> > + sensor. It supports one critical trip point and one
> > + passive trip point for each thermal sensor.
> > +
> > config MAX77620_THERMAL
> > tristate "Temperature sensor driver for Maxim MAX77620 PMIC"
> > depends on MFD_MAX77620
> > diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index
> > 486d682..4062627 100644
> > --- a/drivers/thermal/Makefile
> > +++ b/drivers/thermal/Makefile
> > @@ -40,6 +40,7 @@ obj-$(CONFIG_DB8500_THERMAL) +=
> > db8500_thermal.o
> > obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o
> > obj-$(CONFIG_TANGO_THERMAL) += tango_thermal.o
> > obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o
> > +obj-$(CONFIG_IMX_SC_THERMAL) += imx_sc_thermal.o
> > obj-$(CONFIG_MAX77620_THERMAL) += max77620_thermal.o
> > obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o
> > obj-$(CONFIG_DA9062_THERMAL) += da9062-thermal.o
> > diff --git a/drivers/thermal/imx_sc_thermal.c
> > b/drivers/thermal/imx_sc_thermal.c
> > new file mode 100644
> > index 0000000..dcf16fc
> > --- /dev/null
> > +++ b/drivers/thermal/imx_sc_thermal.c
> > @@ -0,0 +1,137 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright 2018-2019 NXP.
> > + */
> > +
> > +#include <linux/err.h>
> > +#include <linux/firmware/imx/sci.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_device.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/slab.h>
> > +#include <linux/thermal.h>
> > +
> > +#include "thermal_core.h"
> > +
> > +#define IMX_SC_MISC_FUNC_GET_TEMP 13
> > +#define IMX_SC_C_TEMP 0
> > +
> > +static struct imx_sc_ipc *thermal_ipc_handle;
> > +
> > +struct imx_sc_sensor {
> > + struct thermal_zone_device *tzd;
> > + u32 resource_id;
> > +};
> > +
> > +struct req_get_temp {
> > + u16 resource_id;
> > + u8 type;
> > +} __packed;
> > +
> > +struct resp_get_temp {
> > + u16 celsius;
> > + u8 tenths;
> > +} __packed;
> > +
> > +struct imx_sc_msg_misc_get_temp {
> > + struct imx_sc_rpc_msg hdr;
> > + union {
> > + struct req_get_temp req;
> > + struct resp_get_temp resp;
> > + } data;
> > +};
> > +
> > +static int imx_sc_thermal_get_temp(void *data, int *temp) {
> > + struct imx_sc_msg_misc_get_temp msg;
> > + struct imx_sc_rpc_msg *hdr = &msg.hdr;
> > + struct imx_sc_sensor *sensor = data;
> > + int ret;
> > +
> > + msg.data.req.resource_id = sensor->resource_id;
> > + msg.data.req.type = IMX_SC_C_TEMP;
> > +
> > + hdr->ver = IMX_SC_RPC_VERSION;
> > + hdr->svc = IMX_SC_RPC_SVC_MISC;
> > + hdr->func = IMX_SC_MISC_FUNC_GET_TEMP;
> > + hdr->size = 2;
> > +
> > + ret = imx_scu_call_rpc(thermal_ipc_handle, &msg, true);
> > + if (ret) {
> > + pr_err("read temp sensor %d failed, ret %d\n",
> > + sensor->resource_id, ret);
> > + return ret;
> > + }
> > +
> > + *temp = msg.data.resp.celsius * 1000 + msg.data.resp.tenths * 100;
> > +
> > + return 0;
> > +}
> > +
> > +static const struct thermal_zone_of_device_ops imx_sc_thermal_ops = {
> > + .get_temp = imx_sc_thermal_get_temp, };
> > +
> > +static int imx_sc_thermal_probe(struct platform_device *pdev) {
> > + struct device_node *np, *child;
> > + int ret;
> > +
> > + ret = imx_scu_get_handle(&thermal_ipc_handle);
> > + if (ret)
> > + return ret;
> > +
> > + np = of_find_node_by_name(NULL, "thermal-zones");
> > + if (!np)
> > + return -ENODEV;
> > +
> > + for_each_available_child_of_node(np, child) {
> > + struct of_phandle_args sensor_specs;
> > + struct imx_sc_sensor *sensor =
> > + devm_kzalloc(&pdev->dev, sizeof(*sensor),
> > GFP_KERNEL);
> > + if (!sensor)
> > + return -ENOMEM;
> > +
> > + ret = thermal_zone_of_get_sensor_id(child,
> > + &sensor_specs,
> > + &sensor->resource_id);
> > + if (ret < 0) {
> > + dev_err(&pdev->dev,
> > + "failed to get valid sensor resource id: %d\n",
> > + ret);
> > + break;
> > + }
> > +
> > + sensor->tzd =
> > devm_thermal_zone_of_sensor_register(&pdev->dev,
> > + sensor-
> > >resource_id,
> > + sensor,
> > +
> > &imx_sc_thermal_ops);
> > + if (IS_ERR(sensor->tzd)) {
> > + dev_err(&pdev->dev, "failed to register thermal
> > zone\n");
> > + ret = PTR_ERR(sensor->tzd);
> > + break;
> > + }
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static const struct of_device_id imx_sc_thermal_table[] = {
> > + { .compatible = "fsl,imx-sc-thermal", },
> > + {}
> > +};
> > +MODULE_DEVICE_TABLE(of, imx_sc_thermal_table);
> > +
> > +static struct platform_driver imx_sc_thermal_driver = {
> > + .probe = imx_sc_thermal_probe,
> > + .driver = {
> > + .name = "imx-sc-thermal",
> > + .of_match_table = imx_sc_thermal_table,
> > + },
> > +};
> > +module_platform_driver(imx_sc_thermal_driver);
> > +
> > +MODULE_AUTHOR("Anson Huang <Anson.Huang@....com>");
> > +MODULE_DESCRIPTION("Thermal driver for NXP i.MX SoCs with system
> > +controller"); MODULE_LICENSE("GPL v2");
> > --
> > 2.7.4
Powered by blists - more mailing lists