| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <DB3PR0402MB3916791537B7C3C85B13A22BF5330@DB3PR0402MB3916.eurprd04.prod.outlook.com>
Date: Thu, 9 May 2019 01:44:22 +0000
From: Anson Huang <anson.huang@....com>
To: Anson Huang <anson.huang@....com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"mark.rutland@....com" <mark.rutland@....com>,
"shawnguo@...nel.org" <shawnguo@...nel.org>,
"s.hauer@...gutronix.de" <s.hauer@...gutronix.de>,
"kernel@...gutronix.de" <kernel@...gutronix.de>,
"festevam@...il.com" <festevam@...il.com>,
"catalin.marinas@....com" <catalin.marinas@....com>,
"will.deacon@....com" <will.deacon@....com>,
"rui.zhang@...el.com" <rui.zhang@...el.com>,
"edubezval@...il.com" <edubezval@...il.com>,
"daniel.lezcano@...aro.org" <daniel.lezcano@...aro.org>,
Aisheng Dong <aisheng.dong@....com>,
"ulf.hansson@...aro.org" <ulf.hansson@...aro.org>,
Daniel Baluta <daniel.baluta@....com>,
Peng Fan <peng.fan@....com>,
"heiko@...ech.de" <heiko@...ech.de>,
"horms+renesas@...ge.net.au" <horms+renesas@...ge.net.au>,
"agross@...nel.org" <agross@...nel.org>,
"olof@...om.net" <olof@...om.net>,
"bjorn.andersson@...aro.org" <bjorn.andersson@...aro.org>,
"jagan@...rulasolutions.com" <jagan@...rulasolutions.com>,
"enric.balletbo@...labora.com" <enric.balletbo@...labora.com>,
"marc.w.gonzalez@...e.fr" <marc.w.gonzalez@...e.fr>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-pm@...r.kernel.org" <linux-pm@...r.kernel.org>
CC: dl-linux-imx <linux-imx@....com>
Subject: RE: [PATCH V12 3/5] thermal: imx_sc: add i.MX system controller
thermal support
Ping...
> -----Original Message-----
> From: Anson Huang [mailto:Anson.Huang@....com]
> Sent: Tuesday, April 16, 2019 11:22 AM
> To: robh+dt@...nel.org; mark.rutland@....com; shawnguo@...nel.org;
> s.hauer@...gutronix.de; kernel@...gutronix.de; festevam@...il.com;
> catalin.marinas@....com; will.deacon@....com; rui.zhang@...el.com;
> edubezval@...il.com; daniel.lezcano@...aro.org; Aisheng Dong
> <aisheng.dong@....com>; ulf.hansson@...aro.org; Daniel Baluta
> <daniel.baluta@....com>; Peng Fan <peng.fan@....com>;
> heiko@...ech.de; horms+renesas@...ge.net.au; agross@...nel.org;
> olof@...om.net; bjorn.andersson@...aro.org; jagan@...rulasolutions.com;
> enric.balletbo@...labora.com; marc.w.gonzalez@...e.fr;
> devicetree@...r.kernel.org; linux-kernel@...r.kernel.org; linux-arm-
> kernel@...ts.infradead.org; linux-pm@...r.kernel.org
> Cc: dl-linux-imx <linux-imx@....com>
> Subject: [PATCH V12 3/5] thermal: imx_sc: add i.MX system controller
> thermal support
>
> i.MX8QXP is an ARMv8 SoC which has a Cortex-M4 system controller inside,
> the system controller is in charge of controlling power, clock and thermal
> sensors etc..
>
> This patch adds i.MX system controller thermal driver support, Linux kernel
> has to communicate with system controller via MU (message unit) IPC to get
> each thermal sensor's temperature, it supports multiple sensors which are
> passed from device tree, please see the binding doc for details.
>
> Signed-off-by: Anson Huang <Anson.Huang@....com>
> ---
> Changes since V11:
> - move the API of getting thermal zone sensor ID to of-thermal.c as
> generic API;
> - remove unnecessary __packed.
> ---
> drivers/thermal/Kconfig | 11 ++++
> drivers/thermal/Makefile | 1 +
> drivers/thermal/imx_sc_thermal.c | 137
> +++++++++++++++++++++++++++++++++++++++
> 3 files changed, 149 insertions(+)
> create mode 100644 drivers/thermal/imx_sc_thermal.c
>
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index
> 653aa27..4e4fa7e 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -223,6 +223,17 @@ config IMX_THERMAL
> cpufreq is used as the cooling device to throttle CPUs when the
> passive trip is crossed.
>
> +config IMX_SC_THERMAL
> + tristate "Temperature sensor driver for NXP i.MX SoCs with System
> Controller"
> + depends on (ARCH_MXC && IMX_SCU) || COMPILE_TEST
> + depends on OF
> + help
> + Support for Temperature Monitor (TEMPMON) found on NXP i.MX
> SoCs with
> + system controller inside, Linux kernel has to communicate with
> system
> + controller via MU (message unit) IPC to get temperature from
> thermal
> + sensor. It supports one critical trip point and one
> + passive trip point for each thermal sensor.
> +
> config MAX77620_THERMAL
> tristate "Temperature sensor driver for Maxim MAX77620 PMIC"
> depends on MFD_MAX77620
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index
> 486d682..4062627 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -40,6 +40,7 @@ obj-$(CONFIG_DB8500_THERMAL) +=
> db8500_thermal.o
> obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o
> obj-$(CONFIG_TANGO_THERMAL) += tango_thermal.o
> obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o
> +obj-$(CONFIG_IMX_SC_THERMAL) += imx_sc_thermal.o
> obj-$(CONFIG_MAX77620_THERMAL) += max77620_thermal.o
> obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o
> obj-$(CONFIG_DA9062_THERMAL) += da9062-thermal.o
> diff --git a/drivers/thermal/imx_sc_thermal.c
> b/drivers/thermal/imx_sc_thermal.c
> new file mode 100644
> index 0000000..dcf16fc
> --- /dev/null
> +++ b/drivers/thermal/imx_sc_thermal.c
> @@ -0,0 +1,137 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2018-2019 NXP.
> + */
> +
> +#include <linux/err.h>
> +#include <linux/firmware/imx/sci.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/thermal.h>
> +
> +#include "thermal_core.h"
> +
> +#define IMX_SC_MISC_FUNC_GET_TEMP 13
> +#define IMX_SC_C_TEMP 0
> +
> +static struct imx_sc_ipc *thermal_ipc_handle;
> +
> +struct imx_sc_sensor {
> + struct thermal_zone_device *tzd;
> + u32 resource_id;
> +};
> +
> +struct req_get_temp {
> + u16 resource_id;
> + u8 type;
> +} __packed;
> +
> +struct resp_get_temp {
> + u16 celsius;
> + u8 tenths;
> +} __packed;
> +
> +struct imx_sc_msg_misc_get_temp {
> + struct imx_sc_rpc_msg hdr;
> + union {
> + struct req_get_temp req;
> + struct resp_get_temp resp;
> + } data;
> +};
> +
> +static int imx_sc_thermal_get_temp(void *data, int *temp) {
> + struct imx_sc_msg_misc_get_temp msg;
> + struct imx_sc_rpc_msg *hdr = &msg.hdr;
> + struct imx_sc_sensor *sensor = data;
> + int ret;
> +
> + msg.data.req.resource_id = sensor->resource_id;
> + msg.data.req.type = IMX_SC_C_TEMP;
> +
> + hdr->ver = IMX_SC_RPC_VERSION;
> + hdr->svc = IMX_SC_RPC_SVC_MISC;
> + hdr->func = IMX_SC_MISC_FUNC_GET_TEMP;
> + hdr->size = 2;
> +
> + ret = imx_scu_call_rpc(thermal_ipc_handle, &msg, true);
> + if (ret) {
> + pr_err("read temp sensor %d failed, ret %d\n",
> + sensor->resource_id, ret);
> + return ret;
> + }
> +
> + *temp = msg.data.resp.celsius * 1000 + msg.data.resp.tenths * 100;
> +
> + return 0;
> +}
> +
> +static const struct thermal_zone_of_device_ops imx_sc_thermal_ops = {
> + .get_temp = imx_sc_thermal_get_temp,
> +};
> +
> +static int imx_sc_thermal_probe(struct platform_device *pdev) {
> + struct device_node *np, *child;
> + int ret;
> +
> + ret = imx_scu_get_handle(&thermal_ipc_handle);
> + if (ret)
> + return ret;
> +
> + np = of_find_node_by_name(NULL, "thermal-zones");
> + if (!np)
> + return -ENODEV;
> +
> + for_each_available_child_of_node(np, child) {
> + struct of_phandle_args sensor_specs;
> + struct imx_sc_sensor *sensor =
> + devm_kzalloc(&pdev->dev, sizeof(*sensor),
> GFP_KERNEL);
> + if (!sensor)
> + return -ENOMEM;
> +
> + ret = thermal_zone_of_get_sensor_id(child,
> + &sensor_specs,
> + &sensor->resource_id);
> + if (ret < 0) {
> + dev_err(&pdev->dev,
> + "failed to get valid sensor resource id: %d\n",
> + ret);
> + break;
> + }
> +
> + sensor->tzd =
> devm_thermal_zone_of_sensor_register(&pdev->dev,
> + sensor-
> >resource_id,
> + sensor,
> +
> &imx_sc_thermal_ops);
> + if (IS_ERR(sensor->tzd)) {
> + dev_err(&pdev->dev, "failed to register thermal
> zone\n");
> + ret = PTR_ERR(sensor->tzd);
> + break;
> + }
> + }
> +
> + return ret;
> +}
> +
> +static const struct of_device_id imx_sc_thermal_table[] = {
> + { .compatible = "fsl,imx-sc-thermal", },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, imx_sc_thermal_table);
> +
> +static struct platform_driver imx_sc_thermal_driver = {
> + .probe = imx_sc_thermal_probe,
> + .driver = {
> + .name = "imx-sc-thermal",
> + .of_match_table = imx_sc_thermal_table,
> + },
> +};
> +module_platform_driver(imx_sc_thermal_driver);
> +
> +MODULE_AUTHOR("Anson Huang <Anson.Huang@....com>");
> +MODULE_DESCRIPTION("Thermal driver for NXP i.MX SoCs with system
> +controller"); MODULE_LICENSE("GPL v2");
> --
> 2.7.4
Powered by blists - more mailing lists