| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1559332694-6354-2-git-send-email-weifeng.voon@intel.com>
Date: Sat, 1 Jun 2019 03:58:10 +0800
From: Voon Weifeng <weifeng.voon@...el.com>
To: "David S. Miller" <davem@...emloft.net>,
Maxime Coquelin <mcoquelin.stm32@...il.com>
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
Jose Abreu <joabreu@...opsys.com>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Alexandre Torgue <alexandre.torgue@...com>,
biao huang <biao.huang@...iatek.com>,
Ong Boon Leong <boon.leong.ong@...el.com>,
Kweh Hock Leong <hock.leong.kweh@...el.com>,
Voon Weifeng <weifeng.voon@...el.com>
Subject: [PATCH net-next v5 1/5] net: stmmac: enable clause 45 mdio support
From: Kweh Hock Leong <hock.leong.kweh@...el.com>
DWMAC4 is capable to support clause 45 mdio communication.
This patch enable the feature on stmmac_mdio_write() and
stmmac_mdio_read() by following phy_write_mmd() and
phy_read_mmd() mdiobus read write implementation format.
Reviewed-by: Li, Yifan <yifan2.li@...el.com>
Signed-off-by: Kweh Hock Leong <hock.leong.kweh@...el.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@...el.com>
Signed-off-by: Weifeng Voon <weifeng.voon@...el.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 40 ++++++++++++++++++-----
include/linux/phy.h | 2 ++
2 files changed, 34 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index bdd351597b55..c3d8f1d145ec 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -34,11 +34,27 @@
#define MII_BUSY 0x00000001
#define MII_WRITE 0x00000002
+#define MII_DATA_MASK GENMASK(15, 0)
/* GMAC4 defines */
#define MII_GMAC4_GOC_SHIFT 2
+#define MII_GMAC4_REG_ADDR_SHIFT 16
#define MII_GMAC4_WRITE (1 << MII_GMAC4_GOC_SHIFT)
#define MII_GMAC4_READ (3 << MII_GMAC4_GOC_SHIFT)
+#define MII_GMAC4_C45E BIT(1)
+
+static void stmmac_mdio_c45_setup(struct stmmac_priv *priv, int phyreg,
+ u32 *val, u32 *data)
+{
+ unsigned int reg_shift = priv->hw->mii.reg_shift;
+ unsigned int reg_mask = priv->hw->mii.reg_mask;
+
+ *val |= MII_GMAC4_C45E;
+ *val &= ~reg_mask;
+ *val |= ((phyreg >> MII_DEVADDR_C45_SHIFT) << reg_shift) & reg_mask;
+
+ *data |= (phyreg & MII_REGADDR_C45_MASK) << MII_GMAC4_REG_ADDR_SHIFT;
+}
/* XGMAC defines */
#define MII_XGMAC_SADDR BIT(18)
@@ -165,22 +181,26 @@ static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
struct stmmac_priv *priv = netdev_priv(ndev);
unsigned int mii_address = priv->hw->mii.addr;
unsigned int mii_data = priv->hw->mii.data;
- u32 v;
- int data;
u32 value = MII_BUSY;
+ int data = 0;
+ u32 v;
value |= (phyaddr << priv->hw->mii.addr_shift)
& priv->hw->mii.addr_mask;
value |= (phyreg << priv->hw->mii.reg_shift) & priv->hw->mii.reg_mask;
value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
& priv->hw->mii.clk_csr_mask;
- if (priv->plat->has_gmac4)
+ if (priv->plat->has_gmac4) {
value |= MII_GMAC4_READ;
+ if (phyreg & MII_ADDR_C45)
+ stmmac_mdio_c45_setup(priv, phyreg, &value, &data);
+ }
if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
100, 10000))
return -EBUSY;
+ writel(data, priv->ioaddr + mii_data);
writel(value, priv->ioaddr + mii_address);
if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
@@ -188,7 +208,7 @@ static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
return -EBUSY;
/* Read the data from the MII data register */
- data = (int)readl(priv->ioaddr + mii_data);
+ data = (int)readl(priv->ioaddr + mii_data) & MII_DATA_MASK;
return data;
}
@@ -208,8 +228,9 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
struct stmmac_priv *priv = netdev_priv(ndev);
unsigned int mii_address = priv->hw->mii.addr;
unsigned int mii_data = priv->hw->mii.data;
- u32 v;
u32 value = MII_BUSY;
+ int data = phydata;
+ u32 v;
value |= (phyaddr << priv->hw->mii.addr_shift)
& priv->hw->mii.addr_mask;
@@ -217,10 +238,13 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
& priv->hw->mii.clk_csr_mask;
- if (priv->plat->has_gmac4)
+ if (priv->plat->has_gmac4) {
value |= MII_GMAC4_WRITE;
- else
+ if (phyreg & MII_ADDR_C45)
+ stmmac_mdio_c45_setup(priv, phyreg, &value, &data);
+ } else {
value |= MII_WRITE;
+ }
/* Wait until any existing MII operation is complete */
if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
@@ -228,7 +252,7 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
return -EBUSY;
/* Set the MII address register to write */
- writel(phydata, priv->ioaddr + mii_data);
+ writel(data, priv->ioaddr + mii_data);
writel(value, priv->ioaddr + mii_address);
/* Wait until any existing MII operation is complete */
diff --git a/include/linux/phy.h b/include/linux/phy.h
index dc4b51060ebc..a2c25a975661 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -200,6 +200,8 @@ static inline const char *phy_modes(phy_interface_t interface)
/* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit
IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips. */
#define MII_ADDR_C45 (1<<30)
+#define MII_DEVADDR_C45_SHIFT 16
+#define MII_REGADDR_C45_MASK GENMASK(15, 0)
struct device;
struct phylink;
--
1.9.1
Powered by blists - more mailing lists