| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1559528009.32185.3.camel@mtksdaap41>
Date: Mon, 3 Jun 2019 10:13:29 +0800
From: CK Hu <ck.hu@...iatek.com>
To: Jitao Shi <jitao.shi@...iatek.com>
CC: Rob Herring <robh+dt@...nel.org>, Pawel Moll <pawel.moll@....com>,
"Mark Rutland" <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
<linux-pwm@...r.kernel.org>, David Airlie <airlied@...ux.ie>,
Matthias Brugger <matthias.bgg@...il.com>,
"Thierry Reding" <treding@...dia.com>,
Ajay Kumar <ajaykumar.rs@...sung.com>,
"Inki Dae" <inki.dae@...sung.com>,
Rahul Sharma <rahul.sharma@...sung.com>,
"Sean Paul" <seanpaul@...omium.org>,
Vincent Palatin <vpalatin@...omium.org>,
"Andy Yan" <andy.yan@...k-chips.com>,
Philipp Zabel <p.zabel@...gutronix.de>,
Russell King <rmk+kernel@....linux.org.uk>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<dri-devel@...ts.freedesktop.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>,
<srv_heupstream@...iatek.com>,
Sascha Hauer <kernel@...gutronix.de>,
<yingjoe.chen@...iatek.com>, <eddie.huang@...iatek.com>,
<cawa.cheng@...iatek.com>, <bibby.hsieh@...iatek.com>,
<stonea168@....com>
Subject: Re: [v4 2/7] drm/mediatek: fixes CMDQ reg address of mt8173 is
different with mt2701
Hi, Jitao:
On Sat, 2019-06-01 at 17:26 +0800, Jitao Shi wrote:
> Config the different CMDQ reg address in driver data.
>
> Signed-off-by: Jitao Shi <jitao.shi@...iatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_dsi.c | 29 ++++++++++++++++++++++++-----
> 1 file changed, 24 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index 6c4ac37f983d..a48db056df6c 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -131,7 +131,6 @@
> #define VM_CMD_EN BIT(0)
> #define TS_VFP_EN BIT(5)
>
> -#define DSI_CMDQ0 0x180
> #define CONFIG (0xff << 0)
> #define SHORT_PACKET 0
> #define LONG_PACKET 2
> @@ -156,6 +155,10 @@
>
> struct phy;
>
> +struct mtk_dsi_driver_data {
> + const u32 reg_cmdq_off;
> +};
> +
> struct mtk_dsi {
> struct mtk_ddp_comp ddp_comp;
> struct device *dev;
> @@ -182,6 +185,7 @@ struct mtk_dsi {
> bool enabled;
> u32 irq_data;
> wait_queue_head_t irq_wait_queue;
> + const struct mtk_dsi_driver_data *driver_data;
> };
>
> static inline struct mtk_dsi *encoder_to_dsi(struct drm_encoder *e)
> @@ -934,6 +938,7 @@ static void mtk_dsi_cmdq(struct mtk_dsi *dsi, const struct mipi_dsi_msg *msg)
> const char *tx_buf = msg->tx_buf;
> u8 config, cmdq_size, cmdq_off, type = msg->type;
> u32 reg_val, cmdq_mask, i;
> + u32 reg_cmdq_off = dsi->driver_data->reg_cmdq_off;
>
> if (MTK_DSI_HOST_IS_READ(type))
> config = BTA;
> @@ -953,9 +958,11 @@ static void mtk_dsi_cmdq(struct mtk_dsi *dsi, const struct mipi_dsi_msg *msg)
> }
>
> for (i = 0; i < msg->tx_len; i++)
> - writeb(tx_buf[i], dsi->regs + DSI_CMDQ0 + cmdq_off + i);
> + mtk_dsi_mask(dsi, (reg_cmdq_off + cmdq_off + i) & (~0x3U),
> + (0xffUL << (((i + cmdq_off) & 3U) * 8U)),
> + tx_buf[i] << (((i + cmdq_off) & 3U) * 8U));
I've modify this line to
writeb(tx_buf[i], dsi->regs + reg_cmdq_off + cmdq_off + i);
and this works. The call trace list below
[ 8.189067] Call trace:
[ 8.191516] dump_backtrace+0x0/0x164
[ 8.195172] show_stack+0x20/0x2c
[ 8.198482] dump_stack+0xc4/0xfc
[ 8.201792] mtk_dsi_host_transfer+0x248/0x4ac
[ 8.206230] mipi_dsi_device_transfer+0x50/0x64
[ 8.210753] mipi_dsi_dcs_exit_sleep_mode+0x5c/0x8c
[ 8.215625] innolux_panel_prepare+0x128/0x218
[ 8.220061] mtk_dsi_poweron+0x74c/0x7c8
[ 8.223976] mtk_dsi_ddp_start+0x1c/0x28
[ 8.227891] mtk_drm_crtc_atomic_enable+0x310/0x428
[ 8.232765] drm_atomic_helper_commit_modeset_enables+0xa0/0x200
[ 8.238764] mtk_atomic_complete+0x84/0xd0
[ 8.242852] mtk_atomic_commit+0xb8/0xe0
[ 8.246769] drm_atomic_commit+0x50/0x5c
[ 8.250684] drm_atomic_helper_set_config+0x98/0xa0
[ 8.255555] drm_mode_setcrtc+0x280/0x618
[ 8.259558] drm_ioctl_kernel+0xcc/0x10c
[ 8.263473] drm_ioctl+0x248/0x3d4
[ 8.266868] drm_compat_ioctl+0xd8/0xe8
[ 8.270698] __arm64_compat_sys_ioctl+0xf4/0x25c
[ 8.275309] el0_svc_common+0x9c/0xfc
[ 8.278965] el0_svc_compat_handler+0x2c/0x38
[ 8.283314] el0_svc_compat+0x8/0x18
So I think writeb() could work correctly. If you have meet some problem,
it might be other problem.
Regards,
CK
>
> - mtk_dsi_mask(dsi, DSI_CMDQ0, cmdq_mask, reg_val);
> + mtk_dsi_mask(dsi, reg_cmdq_off, cmdq_mask, reg_val);
> mtk_dsi_mask(dsi, DSI_CMDQ_SIZE, CMDQ_SIZE, cmdq_size);
> }
>
> @@ -1101,6 +1108,8 @@ static int mtk_dsi_probe(struct platform_device *pdev)
> if (ret)
> goto err_unregister_host;
>
> + dsi->driver_data = of_device_get_match_data(dev);
> +
> dsi->engine_clk = devm_clk_get(dev, "engine");
> if (IS_ERR(dsi->engine_clk)) {
> ret = PTR_ERR(dsi->engine_clk);
> @@ -1193,9 +1202,19 @@ static int mtk_dsi_remove(struct platform_device *pdev)
> return 0;
> }
>
> +static const struct mtk_dsi_driver_data mt8173_dsi_driver_data = {
> + .reg_cmdq_off = 0x200,
> +};
> +
> +static const struct mtk_dsi_driver_data mt2701_dsi_driver_data = {
> + .reg_cmdq_off = 0x180,
> +};
> +
> static const struct of_device_id mtk_dsi_of_match[] = {
> - { .compatible = "mediatek,mt2701-dsi" },
> - { .compatible = "mediatek,mt8173-dsi" },
> + { .compatible = "mediatek,mt2701-dsi",
> + .data = &mt2701_dsi_driver_data },
> + { .compatible = "mediatek,mt8173-dsi",
> + .data = &mt8173_dsi_driver_data },
> { },
> };
>
Powered by blists - more mailing lists