lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Date:   Wed, 5 Jun 2019 10:35:45 +0000
From:   "james qian wang (Arm Technology China)" <james.qian.wang@....com>
To:     Liviu Dudau <Liviu.Dudau@....com>,
        "airlied@...ux.ie" <airlied@...ux.ie>,
        Brian Starkey <Brian.Starkey@....com>,
        "maarten.lankhorst@...ux.intel.com" 
        <maarten.lankhorst@...ux.intel.com>,
        "sean@...rly.run" <sean@...rly.run>
CC:     "Jonathan Chai (Arm Technology China)" <Jonathan.Chai@....com>,
        "Julien Yin (Arm Technology China)" <Julien.Yin@....com>,
        "thomas Sun (Arm Technology China)" <thomas.Sun@....com>,
        "Lowry Li (Arm Technology China)" <Lowry.Li@....com>,
        Ayan Halder <Ayan.Halder@....com>,
        "Tiannan Zhu (Arm Technology China)" <Tiannan.Zhu@....com>,
        "Yiqi Kang (Arm Technology China)" <Yiqi.Kang@....com>,
        nd <nd@....com>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "dri-devel@...ts.freedesktop.org" <dri-devel@...ts.freedesktop.org>,
        Ben Davis <Ben.Davis@....com>,
        "Oscar Zhang (Arm Technology China)" <Oscar.Zhang@....com>,
        "Channing Chen (Arm Technology China)" <Channing.Chen@....com>,
        "james qian wang (Arm Technology China)" <james.qian.wang@....com>
Subject: [PATCH 3/3] dt/bindings: drm/komeda: Unify mclk/pclk/pipeline->aclk
 to one ACLK

Current komeda driver uses three dedicated clks for a specific purpose:
- mclk: main engine clock
- pclk: APB clock
- pipeline->aclk: AXI clock.

But per spec the komeda HW only has three input clks:
- ACLK: used for AXI masters, APB slave and most pipeline processing
- PXCLK for pipeline 0: output pixel clock for pipeline 0
- PXCLK for pipeline 1: output pixel clock for pipeline 1

So one ACLK is enough, no need to split it to three mclk/pclk/axiclk.

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@....com>
---
 .../devicetree/bindings/display/arm,komeda.txt   | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/arm,komeda.txt b/Documentation/devicetree/bindings/display/arm,komeda.txt
index b12c0453a421..8513695ee47f 100644
--- a/Documentation/devicetree/bindings/display/arm,komeda.txt
+++ b/Documentation/devicetree/bindings/display/arm,komeda.txt
@@ -7,8 +7,7 @@ Required properties:
 - clocks: A list of phandle + clock-specifier pairs, one for each entry
     in 'clock-names'
 - clock-names: A list of clock names. It should contain:
-      - "mclk": for the main processor clock
-      - "pclk": for the APB interface clock
+      - "aclk": for the main processor clock
 - #address-cells: Must be 1
 - #size-cells: Must be 0
 - iommus: configure the stream id to IOMMU, Must be configured if want to
@@ -24,7 +23,6 @@ pipeline node should provide properties:
     in 'clock-names'
 - clock-names: should contain:
       - "pxclk": pixel clock
-      - "aclk": AXI interface clock

 - port: each pipeline connect to an encoder input port. The connection is
     modeled using the OF graph bindings specified in
@@ -46,15 +44,15 @@ Example:
 		compatible = "arm,mali-d71";
 		reg = <0xc00000 0x20000>;
 		interrupts = <0 168 4>;
-		clocks = <&dpu_mclk>, <&dpu_aclk>;
-		clock-names = "mclk", "pclk";
+		clocks = <&dpu_aclk>;
+		clock-names = "aclk";
 		iommus = <&smmu 0>, <&smmu 1>, <&smmu 2>, <&smmu 3>,
 			<&smmu 4>, <&smmu 5>, <&smmu 6>, <&smmu 7>,
 			<&smmu 8>, <&smmu 9>;

 		dp0_pipe0: pipeline@0 {
-			clocks = <&fpgaosc2>, <&dpu_aclk>;
-			clock-names = "pxclk", "aclk";
+			clocks = <&fpgaosc2>;
+			clock-names = "pxclk";
 			reg = <0>;

 			port {
@@ -65,8 +63,8 @@ Example:
 		};

 		dp0_pipe1: pipeline@1 {
-			clocks = <&fpgaosc2>, <&dpu_aclk>;
-			clock-names = "pxclk", "aclk";
+			clocks = <&fpgaosc2>;
+			clock-names = "pxclk";
 			reg = <1>;

 			port {
--
2.17.1

Powered by blists - more mailing lists