| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CANFwon2-1uhuMKTdHb8F8DpdXsARM8Ng5DkK_Ss_e_TCEx9Q7Q@mail.gmail.com>
Date: Wed, 5 Jun 2019 10:33:05 +0800
From: Hui Zhu <teawater@...il.com>
To: Shakeel Butt <shakeelb@...gle.com>
Cc: Hui Zhu <teawaterz@...ux.alibaba.com>,
Dan Streetman <ddstreet@...e.org>,
Minchan Kim <minchan@...nel.org>,
"ngupta@...are.org" <ngupta@...are.org>,
Sergey Senozhatsky <sergey.senozhatsky.work@...il.com>,
Seth Jennings <sjenning@...hat.com>,
Linux MM <linux-mm@...ck.org>,
LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH V2 2/2] zswap: Add module parameter malloc_movable_if_support
Shakeel Butt <shakeelb@...gle.com> 于2019年6月5日周三 上午1:12写道：
>
> On Sun, Jun 2, 2019 at 2:47 AM Hui Zhu <teawaterz@...ux.alibaba.com> wrote:
> >
> > This is the second version that was updated according to the comments
> > from Sergey Senozhatsky in https://lkml.org/lkml/2019/5/29/73
> >
> > zswap compresses swap pages into a dynamically allocated RAM-based
> > memory pool. The memory pool should be zbud, z3fold or zsmalloc.
> > All of them will allocate unmovable pages. It will increase the
> > number of unmovable page blocks that will bad for anti-fragment.
> >
> > zsmalloc support page migration if request movable page:
> > handle = zs_malloc(zram->mem_pool, comp_len,
> > GFP_NOIO | __GFP_HIGHMEM |
> > __GFP_MOVABLE);
> >
> > And commit "zpool: Add malloc_support_movable to zpool_driver" add
> > zpool_malloc_support_movable check malloc_support_movable to make
> > sure if a zpool support allocate movable memory.
> >
> > This commit adds module parameter malloc_movable_if_support to enable
> > or disable zpool allocate block with gfp __GFP_HIGHMEM | __GFP_MOVABLE
> > if it support allocate movable memory (disabled by default).
> >
> > Following part is test log in a pc that has 8G memory and 2G swap.
> >
> > When it disabled:
> > echo lz4 > /sys/module/zswap/parameters/compressor
> > echo zsmalloc > /sys/module/zswap/parameters/zpool
> > echo 1 > /sys/module/zswap/parameters/enabled
> > swapon /swapfile
> > cd /home/teawater/kernel/vm-scalability/
> > /home/teawater/kernel/vm-scalability# export unit_size=$((9 * 1024 * 1024 * 1024))
> > /home/teawater/kernel/vm-scalability# ./case-anon-w-seq
> > 2717908992 bytes / 3977932 usecs = 667233 KB/s
> > 2717908992 bytes / 4160702 usecs = 637923 KB/s
> > 2717908992 bytes / 4354611 usecs = 609516 KB/s
> > 293359 usecs to free memory
> > 340304 usecs to free memory
> > 205781 usecs to free memory
> > 2717908992 bytes / 5588016 usecs = 474982 KB/s
> > 166124 usecs to free memory
> > /home/teawater/kernel/vm-scalability# cat /proc/pagetypeinfo
> > Page block order: 9
> > Pages per block: 512
> >
> > Free pages count per migrate type at order 0 1 2 3 4 5 6 7 8 9 10
> > Node 0, zone DMA, type Unmovable 1 1 1 0 2 1 1 0 1 0 0
> > Node 0, zone DMA, type Movable 0 0 0 0 0 0 0 0 0 1 3
> > Node 0, zone DMA, type Reclaimable 0 0 0 0 0 0 0 0 0 0 0
> > Node 0, zone DMA, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0
> > Node 0, zone DMA, type CMA 0 0 0 0 0 0 0 0 0 0 0
> > Node 0, zone DMA, type Isolate 0 0 0 0 0 0 0 0 0 0 0
> > Node 0, zone DMA32, type Unmovable 5 10 9 8 8 5 1 2 3 0 0
> > Node 0, zone DMA32, type Movable 15 16 14 12 14 10 9 6 6 5 776
> > Node 0, zone DMA32, type Reclaimable 0 0 0 0 0 0 0 0 0 0 0
> > Node 0, zone DMA32, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0
> > Node 0, zone DMA32, type CMA 0 0 0 0 0 0 0 0 0 0 0
> > Node 0, zone DMA32, type Isolate 0 0 0 0 0 0 0 0 0 0 0
> > Node 0, zone Normal, type Unmovable 7097 6914 6473 5642 4373 2664 1220 319 78 4 0
> > Node 0, zone Normal, type Movable 2092 3216 2820 2266 1585 946 559 359 237 258 378
> > Node 0, zone Normal, type Reclaimable 47 88 122 80 34 9 5 4 2 1 2
> > Node 0, zone Normal, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0
> > Node 0, zone Normal, type CMA 0 0 0 0 0 0 0 0 0 0 0
> > Node 0, zone Normal, type Isolate 0 0 0 0 0 0 0 0 0 0 0
> >
> > Number of blocks type Unmovable Movable Reclaimable HighAtomic CMA Isolate
> > Node 0, zone DMA 1 7 0 0 0 0
> > Node 0, zone DMA32 4 1652 0 0 0 0
> > Node 0, zone Normal 834 1572 25 0 0 0
> >
> > When it enabled:
> > echo lz4 > /sys/module/zswap/parameters/compressor
> > echo zsmalloc > /sys/module/zswap/parameters/zpool
> > echo 1 > /sys/module/zswap/parameters/enabled
> > echo 1 > /sys/module/zswap/parameters/malloc_movable_if_support
> > swapon /swapfile
> > cd /home/teawater/kernel/vm-scalability/
> > /home/teawater/kernel/vm-scalability# export unit_size=$((9 * 1024 * 1024 * 1024))
> > /home/teawater/kernel/vm-scalability# ./case-anon-w-seq
> > 2717908992 bytes / 4721401 usecs = 562165 KB/s
> > 2717908992 bytes / 4783167 usecs = 554905 KB/s
> > 2717908992 bytes / 4802125 usecs = 552715 KB/s
> > 2717908992 bytes / 4866579 usecs = 545395 KB/s
> > 323605 usecs to free memory
> > 414817 usecs to free memory
> > 458576 usecs to free memory
> > 355827 usecs to free memory
> > /home/teawater/kernel/vm-scalability# cat /proc/pagetypeinfo
> > Page block order: 9
> > Pages per block: 512
> >
> > Free pages count per migrate type at order 0 1 2 3 4 5 6 7 8 9 10
> > Node 0, zone DMA, type Unmovable 1 1 1 0 2 1 1 0 1 0 0
> > Node 0, zone DMA, type Movable 0 0 0 0 0 0 0 0 0 1 3
> > Node 0, zone DMA, type Reclaimable 0 0 0 0 0 0 0 0 0 0 0
> > Node 0, zone DMA, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0
> > Node 0, zone DMA, type CMA 0 0 0 0 0 0 0 0 0 0 0
> > Node 0, zone DMA, type Isolate 0 0 0 0 0 0 0 0 0 0 0
> > Node 0, zone DMA32, type Unmovable 8 10 8 7 7 6 5 3 2 0 0
> > Node 0, zone DMA32, type Movable 23 21 18 15 13 14 14 10 11 6 766
> > Node 0, zone DMA32, type Reclaimable 0 0 0 0 0 0 0 0 0 0 1
> > Node 0, zone DMA32, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0
> > Node 0, zone DMA32, type CMA 0 0 0 0 0 0 0 0 0 0 0
> > Node 0, zone DMA32, type Isolate 0 0 0 0 0 0 0 0 0 0 0
> > Node 0, zone Normal, type Unmovable 2660 1295 460 102 11 5 3 11 2 4 0
> > Node 0, zone Normal, type Movable 4178 5760 5045 4137 3324 2306 1482 930 497 254 460
> > Node 0, zone Normal, type Reclaimable 50 83 114 93 28 12 10 6 3 3 0
> > Node 0, zone Normal, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0
> > Node 0, zone Normal, type CMA 0 0 0 0 0 0 0 0 0 0 0
> > Node 0, zone Normal, type Isolate 0 0 0 0 0 0 0 0 0 0 0
> >
> > Number of blocks type Unmovable Movable Reclaimable HighAtomic CMA Isolate
> > Node 0, zone DMA 1 7 0 0 0 0
> > Node 0, zone DMA32 4 1650 2 0 0 0
> > Node 0, zone Normal 81 2325 25 0 0 0
> >
> > You can see that the number of unmovable page blocks is decreased
> > when malloc_movable_if_support is enabled.
> >
> > Signed-off-by: Hui Zhu <teawaterz@...ux.alibaba.com>
> > ---
> > mm/zswap.c | 16 +++++++++++++---
> > 1 file changed, 13 insertions(+), 3 deletions(-)
> >
> > diff --git a/mm/zswap.c b/mm/zswap.c
> > index a4e4d36ec085..2fc45de92383 100644
> > --- a/mm/zswap.c
> > +++ b/mm/zswap.c
> > @@ -123,6 +123,13 @@ static bool zswap_same_filled_pages_enabled = true;
> > module_param_named(same_filled_pages_enabled, zswap_same_filled_pages_enabled,
> > bool, 0644);
> >
> > +/* Enable/disable zpool allocate block with gfp __GFP_HIGHMEM | __GFP_MOVABLE
> > + * if it support allocate movable memory (disabled by default).
> > + */
> > +static bool __read_mostly zswap_malloc_movable_if_support;
> > +module_param_cb(malloc_movable_if_support, ¶m_ops_bool,
> > + &zswap_malloc_movable_if_support, 0644);
> > +
>
> Any reason for the above tunable? Do we ever want to disable movable
> for zswap+zsmalloc?
Thanks for your remind. I will post a new version that remove this
module_param later.
Best,
Hui
>
> > /*********************************
> > * data structures
> > **********************************/
> > @@ -1006,6 +1013,7 @@ static int zswap_frontswap_store(unsigned type, pgoff_t offset,
> > char *buf;
> > u8 *src, *dst;
> > struct zswap_header zhdr = { .swpentry = swp_entry(type, offset) };
> > + gfp_t gfp = __GFP_NORETRY | __GFP_NOWARN | __GFP_KSWAPD_RECLAIM;
> >
> > /* THP isn't supported */
> > if (PageTransHuge(page)) {
> > @@ -1079,9 +1087,11 @@ static int zswap_frontswap_store(unsigned type, pgoff_t offset,
> >
> > /* store */
> > hlen = zpool_evictable(entry->pool->zpool) ? sizeof(zhdr) : 0;
> > - ret = zpool_malloc(entry->pool->zpool, hlen + dlen,
> > - __GFP_NORETRY | __GFP_NOWARN | __GFP_KSWAPD_RECLAIM,
> > - &handle);
> > + if (zswap_malloc_movable_if_support &&
> > + zpool_malloc_support_movable(entry->pool->zpool)) {
> > + gfp |= __GFP_HIGHMEM | __GFP_MOVABLE;
> > + }
> > + ret = zpool_malloc(entry->pool->zpool, hlen + dlen, gfp, &handle);
> > if (ret == -ENOSPC) {
> > zswap_reject_compress_poor++;
> > goto put_dstmem;
> > --
> > 2.20.1 (Apple Git-117)
> >
>
Powered by blists - more mailing lists