[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190609091819.2d1a97c90c0b44aa9120d373@gmail.com>
Date: Sun, 9 Jun 2019 09:18:19 +0300
From: Antony Pavlov <antonynpavlov@...il.com>
To: Paul Walmsley <paul.walmsley@...ive.com>
Cc: linux-kernel@...r.kernel.org, linux-riscv@...ts.infradead.org,
Mark Rutland <mark.rutland@....com>,
devicetree@...r.kernel.org, Paul Walmsley <paul@...an.com>,
Albert Ou <aou@...s.berkeley.edu>,
Palmer Dabbelt <palmer@...ive.com>,
Rob Herring <robh+dt@...nel.org>
Subject: Re: [PATCH v3 5/5] riscv: dts: add initial board data for the
SiFive HiFive Unleashed
On Sun, 2 Jun 2019 01:05:00 -0700
Paul Walmsley <paul.walmsley@...ive.com> wrote:
Hi!
> Add initial board data for the SiFive HiFive Unleashed A00.
>
> Currently the data populated in this DT file describes the board
> DRAM configuration and the external clock sources that supply the
> PRCI.
>
> This third version incorporates changes based on more comments from
> Rob Herring <robh+dt@...nel.org>.
>
> Signed-off-by: Paul Walmsley <paul.walmsley@...ive.com>
> Signed-off-by: Paul Walmsley <paul@...an.com>
> Cc: Rob Herring <robh+dt@...nel.org>
> Cc: Mark Rutland <mark.rutland@....com>
> Cc: Palmer Dabbelt <palmer@...ive.com>
> Cc: Albert Ou <aou@...s.berkeley.edu>
> Cc: devicetree@...r.kernel.org
> Cc: linux-riscv@...ts.infradead.org
> Cc: linux-kernel@...r.kernel.org
> ---
> arch/riscv/boot/dts/sifive/Makefile | 2 +
> .../boot/dts/sifive/hifive-unleashed-a00.dts | 67 +++++++++++++++++++
> 2 files changed, 69 insertions(+)
> create mode 100644 arch/riscv/boot/dts/sifive/Makefile
> create mode 100644 arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
>
> diff --git a/arch/riscv/boot/dts/sifive/Makefile b/arch/riscv/boot/dts/sifive/Makefile
> new file mode 100644
> index 000000000000..baaeef9efdcb
> --- /dev/null
> +++ b/arch/riscv/boot/dts/sifive/Makefile
> @@ -0,0 +1,2 @@
> +# SPDX-License-Identifier: GPL-2.0
> +dtb-y += hifive-unleashed-a00.dtb
> diff --git a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
> new file mode 100644
> index 000000000000..1de4ea1577d5
> --- /dev/null
> +++ b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
> @@ -0,0 +1,67 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/* Copyright (c) 2018-2019 SiFive, Inc */
> +
> +/dts-v1/;
> +
> +#include "fu540-c000.dtsi"
You already have "/dts-v1/;" in the fu540-c000.dtsi file.
You can omit it in the hifive-unleashed-a00.dts file.
> +/* Clock frequency (in Hz) of the PCB crystal for rtcclk */
> +#define RTCCLK_FREQ 1000000
> +
> +/ {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + model = "SiFive HiFive Unleashed A00";
> + compatible = "sifive,hifive-unleashed-a00", "sifive,fu540-c000";
> +
> + chosen {
> + };
> +
> + cpus {
> + timebase-frequency = <RTCCLK_FREQ>;
> + };
> +
> + memory@...00000 {
> + device_type = "memory";
> + reg = <0x0 0x80000000 0x2 0x00000000>;
> + };
> +
> + soc {
> + };
> +
> + hfclk: hfclk {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <33333333>;
> + clock-output-names = "hfclk";
> + };
> +
> + rtcclk: rtcclk {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <RTCCLK_FREQ>;
> + clock-output-names = "rtcclk";
> + };
> +};
> +
> +&qspi0 {
> + flash@0 {
> + compatible = "issi,is25wp256", "jedec,spi-nor";
> + reg = <0>;
> + spi-max-frequency = <50000000>;
> + m25p,fast-read;
> + spi-tx-bus-width = <4>;
> + spi-rx-bus-width = <4>;
> + };
> +};
> +
> +&qspi2 {
> + status = "okay";
> + mmc@0 {
> + compatible = "mmc-spi-slot";
> + reg = <0>;
> + spi-max-frequency = <20000000>;
> + voltage-ranges = <3300 3300>;
> + disable-wp;
> + };
> +};
> --
> 2.20.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
--
Best regards,
Antony Pavlov
Powered by blists - more mailing lists