lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Fri, 14 Jun 2019 11:52:25 +0200
From:   Heiko Stuebner <heiko@...ech.de>
To:     Jianqun Xu <jay.xu@...k-chips.com>
Cc:     mark.rutland@....com, robh+dt@...nel.org, zhangzj@...k-chips.com,
        manivannan.sadhasivam@...aro.org,
        linux-rockchip@...ts.infradead.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org
Subject: Re: [PATCH v3 1/1] arm64: dts: rockchip: add core dtsi file for RK3399Pro SoCs

Hi Jianqun,

Am Donnerstag, 30. Mai 2019, 02:08:48 CEST schrieb Jianqun Xu:
> This patch adds core dtsi file for Rockchip RK3399Pro SoCs,
> include rk3399.dtsi. Also enable pciei0/pcie_phy for AP to
> talk to NPU part inside SoC.
> 
> Signed-off-by: Jianqun Xu <jay.xu@...k-chips.com>

could you add the necessary pinctrl entry, as suggested by Manivannan?

Thanks
Heiko

> ---
> changes since v2:
> - only enable pcie0 and pcie_phy nodes, thanks for Heiko and manivannan
> 
> changes since v1:
> - remove dfi and dmc
> 
>  arch/arm64/boot/dts/rockchip/rk3399pro.dtsi | 22 +++++++++++++++++++++
>  1 file changed, 22 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3399pro.dtsi
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro.dtsi
> new file mode 100644
> index 000000000000..bb5ebf6608b9
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3399pro.dtsi
> @@ -0,0 +1,22 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +// Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
> +
> +#include "rk3399.dtsi"
> +
> +/ {
> +	compatible = "rockchip,rk3399pro";
> +};
> +
> +/* Default to enabled since AP talk to NPU part over pcie */
> +&pcie_phy {
> +	status = "okay";
> +};
> +
> +/* Default to enabled since AP talk to NPU part over pcie */
> +&pcie0 {
> +	ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
> +	num-lanes = <4>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pcie_clkreqn_cpm>;
> +	status = "okay";
> +};
> 




Powered by blists - more mailing lists