| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190614141400.GI15526@ulmo>
Date: Fri, 14 Jun 2019 16:14:00 +0200
From: Thierry Reding <thierry.reding@...il.com>
To: Dmitry Osipenko <digetx@...il.com>
Cc: Daniel Lezcano <daniel.lezcano@...aro.org>,
Thomas Gleixner <tglx@...utronix.de>,
Alessandro Zummo <a.zummo@...ertech.it>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Jonathan Hunter <jonathanh@...dia.com>,
linux-tegra@...r.kernel.org, linux-rtc@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/2] rtc: tegra: Implement suspend clock source
On Fri, Jun 14, 2019 at 04:49:44PM +0300, Dmitry Osipenko wrote:
> 14.06.2019 16:41, Thierry Reding пишет:
> > On Fri, Jun 14, 2019 at 03:01:13PM +0300, Dmitry Osipenko wrote:
> >> 14.06.2019 13:47, Thierry Reding пишет:
> >>> From: Thierry Reding <treding@...dia.com>
> >>>
> >>> The suspend clock source for Tegra210 and earlier is currently
> >>> implemented in the Tegra timer driver. However, the suspend clock source
> >>> code accesses registers that are part of the RTC hardware block, so both
> >>> can step on each others' toes. In practice this isn't an issue, but
> >>> there is no reason why the RTC driver can't implement the clock source,
> >>> so move the code over to the tegra-rtc driver.
> >>>
> >>> Signed-off-by: Thierry Reding <treding@...dia.com>
> >>> ---
> >>> drivers/clocksource/timer-tegra.c | 44 -------------------------------
> >>> drivers/rtc/rtc-tegra.c | 42 +++++++++++++++++++++++++++++
> >>> 2 files changed, 42 insertions(+), 44 deletions(-)
> >>>
> >>> diff --git a/drivers/clocksource/timer-tegra.c b/drivers/clocksource/timer-tegra.c
> >>> index e6608141cccb..87eac618924d 100644
> >>> --- a/drivers/clocksource/timer-tegra.c
> >>> +++ b/drivers/clocksource/timer-tegra.c
> >>> @@ -21,10 +21,6 @@
> >>>
> >>> #include "timer-of.h"
> >>>
> >>> -#define RTC_SECONDS 0x08
> >>> -#define RTC_SHADOW_SECONDS 0x0c
> >>> -#define RTC_MILLISECONDS 0x10
> >>> -
> >>> #define TIMERUS_CNTR_1US 0x10
> >>> #define TIMERUS_USEC_CFG 0x14
> >>> #define TIMERUS_CNTR_FREEZE 0x4c
> >>> @@ -164,34 +160,6 @@ static struct delay_timer tegra_delay_timer = {
> >>> };
> >>> #endif
> >>>
> >>> -static struct timer_of suspend_rtc_to = {
> >>> - .flags = TIMER_OF_BASE | TIMER_OF_CLOCK,
> >>> -};
> >>> -
> >>> -/*
> >>> - * tegra_rtc_read - Reads the Tegra RTC registers
> >>> - * Care must be taken that this function is not called while the
> >>> - * tegra_rtc driver could be executing to avoid race conditions
> >>> - * on the RTC shadow register
> >>> - */
> >>> -static u64 tegra_rtc_read_ms(struct clocksource *cs)
> >>> -{
> >>> - void __iomem *reg_base = timer_of_base(&suspend_rtc_to);
> >>> -
> >>> - u32 ms = readl_relaxed(reg_base + RTC_MILLISECONDS);
> >>> - u32 s = readl_relaxed(reg_base + RTC_SHADOW_SECONDS);
> >>> -
> >>> - return (u64)s * MSEC_PER_SEC + ms;
> >>> -}
> >>> -
> >>> -static struct clocksource suspend_rtc_clocksource = {
> >>> - .name = "tegra_suspend_timer",
> >>> - .rating = 200,
> >>> - .read = tegra_rtc_read_ms,
> >>> - .mask = CLOCKSOURCE_MASK(32),
> >>> - .flags = CLOCK_SOURCE_IS_CONTINUOUS | CLOCK_SOURCE_SUSPEND_NONSTOP,
> >>> -};
> >>> -
> >>> static inline unsigned int tegra_base_for_cpu(int cpu, bool tegra20)
> >>> {
> >>> if (tegra20) {
> >>> @@ -385,15 +353,3 @@ static int __init tegra20_init_timer(struct device_node *np)
> >>> return tegra_init_timer(np, true, rating);
> >>> }
> >>> TIMER_OF_DECLARE(tegra20_timer, "nvidia,tegra20-timer", tegra20_init_timer);
> >>> -
> >>> -static int __init tegra20_init_rtc(struct device_node *np)
> >>> -{
> >>> - int ret;
> >>> -
> >>> - ret = timer_of_init(np, &suspend_rtc_to);
> >>> - if (ret)
> >>> - return ret;
> >>> -
> >>> - return clocksource_register_hz(&suspend_rtc_clocksource, 1000);
> >>> -}
> >>> -TIMER_OF_DECLARE(tegra20_rtc, "nvidia,tegra20-rtc", tegra20_init_rtc);
> >>> diff --git a/drivers/rtc/rtc-tegra.c b/drivers/rtc/rtc-tegra.c
> >>> index 8fa1b3febf69..6da54264a27a 100644
> >>> --- a/drivers/rtc/rtc-tegra.c
> >>> +++ b/drivers/rtc/rtc-tegra.c
> >>> @@ -6,6 +6,7 @@
> >>> */
> >>>
> >>> #include <linux/clk.h>
> >>> +#include <linux/clocksource.h>
> >>> #include <linux/delay.h>
> >>> #include <linux/init.h>
> >>> #include <linux/io.h>
> >>> @@ -52,8 +53,15 @@ struct tegra_rtc_info {
> >>> struct clk *clk;
> >>> int irq; /* alarm and periodic IRQ */
> >>> spinlock_t lock;
> >>> +
> >>> + struct clocksource clksrc;
> >>> };
> >>>
> >>> +static struct tegra_rtc_info *to_tegra_rtc(struct clocksource *clksrc)
> >>> +{
> >>> + return container_of(clksrc, struct tegra_rtc_info, clksrc);
> >>> +}
> >>> +
> >>> /*
> >>> * RTC hardware is busy when it is updating its values over AHB once every
> >>> * eight 32 kHz clocks (~250 us). Outside of these updates the CPU is free to
> >>> @@ -268,6 +276,17 @@ static const struct rtc_class_ops tegra_rtc_ops = {
> >>> .alarm_irq_enable = tegra_rtc_alarm_irq_enable,
> >>> };
> >>>
> >>> +static u64 tegra_rtc_read_ms(struct clocksource *clksrc)
> >>> +{
> >>> + struct tegra_rtc_info *info = to_tegra_rtc(clksrc);
> >>> + u32 ms, s;
> >>> +
> >>> + ms = readl_relaxed(info->base + TEGRA_RTC_REG_MILLI_SECONDS);
> >>> + s = readl_relaxed(info->base + TEGRA_RTC_REG_SHADOW_SECONDS);
> >>> +
> >>> + return (u64)s * MSEC_PER_SEC + ms;
> >>> +}
> >>> +
> >>> static const struct of_device_id tegra_rtc_dt_match[] = {
> >>> { .compatible = "nvidia,tegra20-rtc", },
> >>> {}
> >>> @@ -339,6 +358,28 @@ static int tegra_rtc_probe(struct platform_device *pdev)
> >>> goto disable_clk;
> >>> }
> >>>
> >>> + /*
> >>> + * The Tegra RTC is the only reliable clock source that persists
> >>> + * across an SC7 transition (VDD_CPU and VDD_CORE off) on Tegra210
> >>> + * and earlier. Starting with Tegra186, the ARM v8 architected timer
> >>> + * is in an always on power partition and its reference clock keeps
> >>> + * running during SC7. Therefore, we technically don't need to have
> >>> + * the RTC register as a clock source on Tegra186 and later, but it
> >>> + * doesn't hurt either, so we just register it unconditionally here.
> >>> + */
> >>> + info->clksrc.name = "tegra_rtc";
> >>> + info->clksrc.rating = 200;
> >>> + info->clksrc.read = tegra_rtc_read_ms;
> >>> + info->clksrc.mask = CLOCKSOURCE_MASK(32);
> >>
> >> Hm.. shouldn't this be CLOCKSOURCE_MASK(52)? Given that there are 32 bits for seconds and
> >> 10bits for milliseconds.
> >
> > Did you mean to say CLOCKSOURCE_MASK(42)? Yeah, that's probably better
> > here.
>
> Yes, 42 :)
I'm wondering if that could perhaps be a little problematic because
we're not actually using all of the 10 bits for the milliseconds. So the
maximum value that we can return is:
4294967296 * 1000 + 999 = 4294967296999
However, the maximum value for a 42 bit mask is:
2^42 - 1 = 4398046511103
That mask is only used in order to wrap around in delta computations. So
I can imagine a situation where we'd end up with a wrong value in the
delta. I suppose this can only really happen if the two samples are very
far apart in time, so maybe this isn't worth worrying about.
Thierry
Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)
Powered by blists - more mailing lists