[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <fe5206ed-4e6b-1b2a-0283-bdc8e44270dc@st.com>
Date: Mon, 17 Jun 2019 11:41:22 +0200
From: Alexandre Torgue <alexandre.torgue@...com>
To: Yannick Fertré <yannick.fertre@...com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
Benjamin Gaignard <benjamin.gaignard@...com>,
Philippe Cornu <philippe.cornu@...com>,
Fabrice Gasnier <fabrice.gasnier@...com>
Subject: Re: [PATCH] ARM: dts: stm32: add power supply of rm68200 on
stm32mp157c-ev1
Hi Yannick
On 5/21/19 5:03 PM, Yannick Fertré wrote:
> This patch adds a new property (power-supply) to panel rm68200 (raydium)
> on stm32mp157c-ev1.
>
> Signed-off-by: Yannick Fertré <yannick.fertre@...com>
> ---
> arch/arm/boot/dts/stm32mp157c-ev1.dts | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
> index 8ef2cb0..50f3263 100644
> --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
> +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
> @@ -127,6 +127,7 @@
> reg = <0>;
> reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>;
> backlight = <&panel_backlight>;
> + power-supply = <&v3v3>;
> status = "okay";
>
> port {
>
Applied on stm32-next.
Thanks.
Alex
Powered by blists - more mailing lists