linux-kernel - Re: [PATCH 5/6] net: macb: add support for high speed interface

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20190617151927.GI25211@lunn.ch>
Date:   Mon, 17 Jun 2019 17:19:27 +0200
From:   Andrew Lunn <andrew@...n.ch>
To:     Parshuram Thombare <pthombar@...ence.com>
Cc:     nicolas.ferre@...rochip.com, davem@...emloft.net,
        f.fainelli@...il.com, netdev@...r.kernel.org, hkallweit1@...il.com,
        linux-kernel@...r.kernel.org, rafalc@...ence.com,
        aniljoy@...ence.com, piotrs@...ence.com
Subject: Re: [PATCH 5/6] net: macb: add support for high speed interface

>  	switch (state->interface) {
> +	case PHY_INTERFACE_MODE_NA:

I would not list PHY_INTERFACE_MODE_NA here.

> +	case PHY_INTERFACE_MODE_USXGMII:
> +	case PHY_INTERFACE_MODE_10GKR:
> +		if (bp->caps & MACB_CAPS_GIGABIT_MODE_AVAILABLE) {
> +			phylink_set(mask, 10000baseCR_Full);
> +			phylink_set(mask, 10000baseER_Full);
> +			phylink_set(mask, 10000baseKR_Full);
> +			phylink_set(mask, 10000baseLR_Full);
> +			phylink_set(mask, 10000baseLRM_Full);
> +			phylink_set(mask, 10000baseSR_Full);
> +			phylink_set(mask, 10000baseT_Full);
> +			phylink_set(mask, 5000baseT_Full);
> +			phylink_set(mask, 2500baseX_Full);
> +			phylink_set(mask, 1000baseX_Full);
> +		}
> +		/* Fall-through */
>  	case PHY_INTERFACE_MODE_SGMII:
>  		if (bp->caps & MACB_CAPS_GIGABIT_MODE_AVAILABLE)
>  			phylink_set(mask, 2500baseT_Full);
> @@ -594,17 +639,55 @@ static void gem_mac_config(struct phylink_config *pl_config, unsigned int mode,
>  			reg |= MACB_BIT(FD);
>  		macb_or_gem_writel(bp, NCFGR, reg);
>  
> -		if (state->speed == SPEED_2500) {
> -			gem_writel(bp, NCFGR, GEM_BIT(GBE) |
> -				   gem_readl(bp, NCFGR));
> -			gem_writel(bp, NCR, GEM_BIT(TWO_PT_FIVE_GIG) |
> -				   gem_readl(bp, NCR));
> -		} else if (state->speed == SPEED_1000) {
> -			gem_writel(bp, NCFGR, GEM_BIT(GBE) |
> -				   gem_readl(bp, NCFGR));
> -		} else if (state->speed == SPEED_100) {
> -			macb_writel(bp, NCFGR, MACB_BIT(SPD) |
> -				    macb_readl(bp, NCFGR));
> +		if (bp->phy_interface == PHY_INTERFACE_MODE_USXGMII) {
> +			u32 speed;
> +
> +			switch (state->speed) {
> +			case SPEED_10000:
> +				if (bp->serdes_rate ==
> +				    MACB_SERDES_RATE_10_PT_3125Gbps) {
> +					speed = HS_MAC_SPEED_10000M;
> +				} else {
> +					netdev_warn(netdev,
> +						    "10G not supported by HW");
> +					netdev_warn(netdev, "Setting speed to 1G");
> +					speed = HS_MAC_SPEED_1000M;
> +				}
> +				break;
> +			case SPEED_5000:
> +				speed = HS_MAC_SPEED_5000M;
> +				break;
> +			case SPEED_2500:
> +				speed = HS_MAC_SPEED_2500M;
> +				break;
> +			case SPEED_1000:
> +				speed = HS_MAC_SPEED_1000M;
> +				break;
> +			default:
> +			case SPEED_100:
> +				speed = HS_MAC_SPEED_100M;
> +				break;
> +			}
> +
> +			gem_writel(bp, HS_MAC_CONFIG,
> +				   GEM_BFINS(HS_MAC_SPEED, speed,
> +					     gem_readl(bp, HS_MAC_CONFIG)));
> +			gem_writel(bp, USX_CONTROL,
> +				   GEM_BFINS(USX_CTRL_SPEED, speed,
> +					     gem_readl(bp, USX_CONTROL)));
> +		} else {
> +			if (state->speed == SPEED_2500) {
> +				gem_writel(bp, NCFGR, GEM_BIT(GBE) |
> +					   gem_readl(bp, NCFGR));
> +				gem_writel(bp, NCR, GEM_BIT(TWO_PT_FIVE_GIG) |
> +					   gem_readl(bp, NCR));
> +			} else if (state->speed == SPEED_1000) {
> +				gem_writel(bp, NCFGR, GEM_BIT(GBE) |
> +					   gem_readl(bp, NCFGR));
> +			} else if (state->speed == SPEED_100) {
> +				macb_writel(bp, NCFGR, MACB_BIT(SPD) |
> +					    macb_readl(bp, NCFGR));
> +			}

Maybe split this up into two helper functions?

      Andrew