| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190618190534.4951-6-krzk@kernel.org>
Date: Tue, 18 Jun 2019 21:05:29 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: David Airlie <airlied@...ux.ie>, Daniel Vetter <daniel@...ll.ch>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Kukjin Kim <kgene@...nel.org>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
Sylwester Nawrocki <s.nawrocki@...sung.com>,
Tomasz Figa <tomasz.figa@...il.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Marek Szyprowski <m.szyprowski@...sung.com>,
Olof Johansson <olof@...om.net>,
dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-clk@...r.kernel.org
Cc: Joseph Kogut <joseph.kogut@...il.com>,
Arnd Bergmann <arnd@...db.de>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Inki Dae <inki.dae@...sung.com>,
Krzysztof Kozlowski <krzk@...nel.org>
Subject: [RFT 05/10] ARM: dts: exynos: Add GPU/Mali 400 node to Exynos4
Add nodes for GPU (Mali 400) to Exynos4210 and Exynos4412. Describe the
GPU as much as possible however still few elements are missing:
1. Exynos4210 bus clock is not described in hardware manual therefore
the IP gate clock was provided,
2. Exynos4412: Not sure what to do with CLK_G3D clock responsible for
gating entire IP block (it is now being disabled as unused),
3. Regulator supplies on Trats board.
Limited testing on Odroid U3 (Exynos4412).
Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
---
arch/arm/boot/dts/exynos4.dtsi | 29 +++++++++++++++++
arch/arm/boot/dts/exynos4210-origen.dts | 5 +++
arch/arm/boot/dts/exynos4210-trats.dts | 4 +++
.../boot/dts/exynos4210-universal_c210.dts | 5 +++
arch/arm/boot/dts/exynos4210.dtsi | 28 ++++++++++++++++
.../boot/dts/exynos4412-itop-scp-core.dtsi | 5 +++
arch/arm/boot/dts/exynos4412-midas.dtsi | 5 +++
.../boot/dts/exynos4412-odroid-common.dtsi | 5 +++
arch/arm/boot/dts/exynos4412.dtsi | 32 +++++++++++++++++++
9 files changed, 118 insertions(+)
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 36ccf227434d..112a4fb8e5dd 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -51,6 +51,35 @@
serial3 = &serial_3;
};
+ gpu: gpu@...00000 {
+ compatible = "samsung,exynos3250-mali", "arm,mali-400";
+ reg = <0x13000000 0x10000>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp",
+ "gpmmu",
+ "pp0",
+ "ppmmu0",
+ "pp1",
+ "ppmmu1",
+ "pp2",
+ "ppmmu2",
+ "pp3",
+ "ppmmu3",
+ "pmu";
+ power-domains = <&pd_g3d>;
+ status = "disabled";
+ };
+
pmu: pmu {
compatible = "arm,cortex-a9-pmu";
interrupt-parent = <&combiner>;
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 36b1edea254a..0d1e1a9c2f6e 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -132,6 +132,11 @@
status = "okay";
};
+&gpu {
+ mali-supply = <&buck3_reg>;
+ status = "okay";
+};
+
&hsotg {
vusb_d-supply = <&ldo3_reg>;
vusb_a-supply = <&ldo8_reg>;
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 6882480dbaf7..7c39dd1c4d3a 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -239,6 +239,10 @@
status = "okay";
};
+&gpu {
+ status = "okay";
+};
+
&hsotg {
vusb_d-supply = <&vusb_reg>;
vusb_a-supply = <&vusbdac_reg>;
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index bf092e97e14f..82a8b5449978 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -262,6 +262,11 @@
};
};
+&gpu {
+ mali-supply = <&buck2_reg>;
+ status = "okay";
+};
+
&hdmi {
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index ea0e043cd2b4..3a1cd4be9ca1 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -449,6 +449,34 @@
samsung,lcd-wb;
};
+&gpu {
+ /*
+ * CLK_G3D is not actually bus clock but a IP-level clock.
+ * The bus clock is not described in hardware manual.
+ */
+ clocks = <&clock CLK_G3D>,
+ <&clock CLK_SCLK_G3D>;
+ clock-names = "bus", "core";
+ operating-points-v2 = <&gpu_opp_table>;
+
+ gpu_opp_table: opp_table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ opp-microvolt = <950000>;
+ };
+ opp-267000000 {
+ opp-hz = /bits/ 64 <267000000>;
+ opp-microvolt = <1050000>;
+ };
+ opp-330000000 {
+ opp-hz = /bits/ 64 <330000000>;
+ opp-microvolt = <1100000>;
+ };
+ };
+};
+
&mdma1 {
power-domains = <&pd_lcd0>;
};
diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
index 0038465f38f1..462a5409b1de 100644
--- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
+++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
@@ -115,6 +115,11 @@
cpu0-supply = <&buck2_reg>;
};
+&gpu {
+ mali-supply = <&buck4_reg>;
+ status = "okay";
+};
+
&hsotg {
vusb_d-supply = <&ldo15_reg>;
vusb_a-supply = <&ldo12_reg>;
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index 4c15cb616cdf..83be3a797411 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -453,6 +453,11 @@
status = "okay";
};
+&gpu {
+ mali-supply = <&buck4_reg>;
+ status = "okay";
+};
+
&hdmi {
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 08d3a0a7b4eb..ea55f377d17c 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -229,6 +229,11 @@
assigned-clock-rates = <0>, <176000000>;
};
+&gpu {
+ mali-supply = <&buck4_reg>;
+ status = "okay";
+};
+
&hdmi {
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index e5c041ec0756..e8dbad3c36d8 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -716,6 +716,38 @@
cpu-offset = <0x4000>;
};
+&gpu {
+ clocks = <&clock CLK_ASYNC_G3D>,
+ <&clock CLK_SCLK_G3D>;
+ clock-names = "bus", "core";
+ operating-points-v2 = <&gpu_opp_table>;
+
+ gpu_opp_table: opp_table {
+ compatible = "operating-points-v2";
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ opp-microvolt = <875000>;
+ };
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ opp-microvolt = <875000>;
+ };
+ opp-267000000 {
+ opp-hz = /bits/ 64 <267000000>;
+ opp-microvolt = <900000>;
+ };
+ opp-350000000 {
+ opp-hz = /bits/ 64 <350000000>;
+ opp-microvolt = <950000>;
+ };
+ opp-440000000 {
+ opp-hz = /bits/ 64 <440000000>;
+ opp-microvolt = <1025000>;
+ };
+ };
+};
+
&hdmi {
compatible = "samsung,exynos4212-hdmi";
};
--
2.17.1
Powered by blists - more mailing lists