[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190618190534.4951-7-krzk@kernel.org>
Date: Tue, 18 Jun 2019 21:05:30 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: David Airlie <airlied@...ux.ie>, Daniel Vetter <daniel@...ll.ch>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Kukjin Kim <kgene@...nel.org>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
Sylwester Nawrocki <s.nawrocki@...sung.com>,
Tomasz Figa <tomasz.figa@...il.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Marek Szyprowski <m.szyprowski@...sung.com>,
Olof Johansson <olof@...om.net>,
dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-clk@...r.kernel.org
Cc: Joseph Kogut <joseph.kogut@...il.com>,
Arnd Bergmann <arnd@...db.de>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Inki Dae <inki.dae@...sung.com>,
Krzysztof Kozlowski <krzk@...nel.org>
Subject: [RFT 06/10] arm64: dts: exynos: Add GPU/Mali T760 node to Exynos5433
Add nodes for GPU (Mali T760) to Exynos5433. Missing element is the
cooling device. Not tested on HW.
Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
---
.../dts/exynos/exynos5433-tm2-common.dtsi | 5 ++
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 51 +++++++++++++++++++
2 files changed, 56 insertions(+)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index d2de16645e10..6f90b0e62cba 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -350,6 +350,11 @@
pinctrl-0 = <&te_irq>;
};
+&gpu {
+ mali-supply = <&buck6_reg>;
+ status = "okay";
+};
+
&hdmi {
hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>;
status = "okay";
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index d29d13f4694f..a76f620f7f35 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -249,6 +249,57 @@
};
};
+ gpu: gpu@...c0000 {
+ compatible = "samsung,exynos5433-mali", "arm,mali-t760";
+ reg = <0x14ac0000 0x5000>;
+ interrupts = <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "job", "mmu", "gpu";
+ clocks = <&cmu_g3d CLK_ACLK_G3D>;
+ clock-names = "core";
+ power-domains = <&pd_g3d>;
+ operating-points-v2 = <&gpu_opp_table>;
+ status = "disabled";
+
+ gpu_opp_table: opp_table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ opp-microvolt = <1000000>;
+ };
+ opp-267000000 {
+ opp-hz = /bits/ 64 <267000000>;
+ opp-microvolt = <1000000>;
+ };
+ opp-350000000 {
+ opp-hz = /bits/ 64 <350000000>;
+ opp-microvolt = <1025000>;
+ };
+ opp-420000000 {
+ opp-hz = /bits/ 64 <420000000>;
+ opp-microvolt = <1025000>;
+ };
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <1075000>;
+ };
+ opp-550000000 {
+ opp-hz = /bits/ 64 <550000000>;
+ opp-microvolt = <1125000>;
+ };
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <1150000>;
+ };
+ opp-700000000 {
+ opp-hz = /bits/ 64 <700000000>;
+ opp-microvolt = <1150000>;
+ };
+ };
+ };
+
psci {
compatible = "arm,psci";
method = "smc";
--
2.17.1
Powered by blists - more mailing lists