| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190620133231.7E667440049@finisterre.sirena.org.uk>
Date: Thu, 20 Jun 2019 14:32:31 +0100 (BST)
From: Mark Brown <broonie@...nel.org>
To: Felix Riemann <felix.riemann@....de>
Cc: Felix Riemann <Felix.Riemann@....de>,
Lee Jones <lee.jones@...aro.org>,
Liam Girdwood <lgirdwood@...il.com>,
linux-kernel@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>,
Mark Brown <broonie@...nel.org>,
Steve Twiss <stwiss.opensource@...semi.com>,
Support Opensource <support.opensource@...semi.com>
Subject: Applied "regulator: da9061/62: Adjust LDO voltage selection minimum value" to the regulator tree
The patch
regulator: da9061/62: Adjust LDO voltage selection minimum value
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.3
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From fd5d10059d5ead12dd12f05ae6d96e70d1fac3df Mon Sep 17 00:00:00 2001
From: Felix Riemann <felix.riemann@....de>
Date: Thu, 20 Jun 2019 08:45:00 +0100
Subject: [PATCH] regulator: da9061/62: Adjust LDO voltage selection minimum
value
According to the DA9061 and DA9062 datasheets the LDO voltage selection
registers have a lower value of 0x02. This applies to voltage registers
VLDO1_A, VLDO2_A, VLDO3_A and VLDO4_A. This linear offset of 0x02 was
previously not observed by the driver, causing the LDO output voltage to
be systematically lower by two steps (= 0.1V).
This patch fixes the minimum linear selector offset by setting it to a
value of 2 and increases the n_voltages by the same amount allowing
voltages in the range 0x02 -> 0.9V to 0x38 -> 3.6V to be correctly
selected. Also fixes an incorrect calculaton for the n_voltages value in
the regulator LDO2.
These fixes effect all LDO regulators for DA9061 and DA9062.
Acked-by: Steve Twiss <stwiss.opensource@...semi.com>
Tested-by: Steve Twiss <stwiss.opensource@...semi.com>
Signed-off-by: Felix Riemann <felix.riemann@....de>
Signed-off-by: Steve Twiss <stwiss.opensource@...semi.com>
Signed-off-by: Mark Brown <broonie@...nel.org>
---
drivers/regulator/da9062-regulator.c | 40 +++++++++++++++++-----------
include/linux/mfd/da9062/registers.h | 3 +++
2 files changed, 27 insertions(+), 16 deletions(-)
diff --git a/drivers/regulator/da9062-regulator.c b/drivers/regulator/da9062-regulator.c
index a02e0488410f..2ffc64622451 100644
--- a/drivers/regulator/da9062-regulator.c
+++ b/drivers/regulator/da9062-regulator.c
@@ -493,12 +493,13 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = {
.desc.ops = &da9062_ldo_ops,
.desc.min_uV = (900) * 1000,
.desc.uV_step = (50) * 1000,
- .desc.n_voltages = ((3600) - (900))/(50) + 1,
+ .desc.n_voltages = ((3600) - (900))/(50) + 1
+ + DA9062AA_VLDO_A_MIN_SEL,
.desc.enable_reg = DA9062AA_LDO1_CONT,
.desc.enable_mask = DA9062AA_LDO1_EN_MASK,
.desc.vsel_reg = DA9062AA_VLDO1_A,
.desc.vsel_mask = DA9062AA_VLDO1_A_MASK,
- .desc.linear_min_sel = 0,
+ .desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL,
.sleep = REG_FIELD(DA9062AA_VLDO1_A,
__builtin_ffs((int)DA9062AA_LDO1_SL_A_MASK) - 1,
sizeof(unsigned int) * 8 -
@@ -525,12 +526,13 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = {
.desc.ops = &da9062_ldo_ops,
.desc.min_uV = (900) * 1000,
.desc.uV_step = (50) * 1000,
- .desc.n_voltages = ((3600) - (600))/(50) + 1,
+ .desc.n_voltages = ((3600) - (900))/(50) + 1
+ + DA9062AA_VLDO_A_MIN_SEL,
.desc.enable_reg = DA9062AA_LDO2_CONT,
.desc.enable_mask = DA9062AA_LDO2_EN_MASK,
.desc.vsel_reg = DA9062AA_VLDO2_A,
.desc.vsel_mask = DA9062AA_VLDO2_A_MASK,
- .desc.linear_min_sel = 0,
+ .desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL,
.sleep = REG_FIELD(DA9062AA_VLDO2_A,
__builtin_ffs((int)DA9062AA_LDO2_SL_A_MASK) - 1,
sizeof(unsigned int) * 8 -
@@ -557,12 +559,13 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = {
.desc.ops = &da9062_ldo_ops,
.desc.min_uV = (900) * 1000,
.desc.uV_step = (50) * 1000,
- .desc.n_voltages = ((3600) - (900))/(50) + 1,
+ .desc.n_voltages = ((3600) - (900))/(50) + 1
+ + DA9062AA_VLDO_A_MIN_SEL,
.desc.enable_reg = DA9062AA_LDO3_CONT,
.desc.enable_mask = DA9062AA_LDO3_EN_MASK,
.desc.vsel_reg = DA9062AA_VLDO3_A,
.desc.vsel_mask = DA9062AA_VLDO3_A_MASK,
- .desc.linear_min_sel = 0,
+ .desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL,
.sleep = REG_FIELD(DA9062AA_VLDO3_A,
__builtin_ffs((int)DA9062AA_LDO3_SL_A_MASK) - 1,
sizeof(unsigned int) * 8 -
@@ -589,12 +592,13 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = {
.desc.ops = &da9062_ldo_ops,
.desc.min_uV = (900) * 1000,
.desc.uV_step = (50) * 1000,
- .desc.n_voltages = ((3600) - (900))/(50) + 1,
+ .desc.n_voltages = ((3600) - (900))/(50) + 1
+ + DA9062AA_VLDO_A_MIN_SEL,
.desc.enable_reg = DA9062AA_LDO4_CONT,
.desc.enable_mask = DA9062AA_LDO4_EN_MASK,
.desc.vsel_reg = DA9062AA_VLDO4_A,
.desc.vsel_mask = DA9062AA_VLDO4_A_MASK,
- .desc.linear_min_sel = 0,
+ .desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL,
.sleep = REG_FIELD(DA9062AA_VLDO4_A,
__builtin_ffs((int)DA9062AA_LDO4_SL_A_MASK) - 1,
sizeof(unsigned int) * 8 -
@@ -769,12 +773,13 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
.desc.ops = &da9062_ldo_ops,
.desc.min_uV = (900) * 1000,
.desc.uV_step = (50) * 1000,
- .desc.n_voltages = ((3600) - (900))/(50) + 1,
+ .desc.n_voltages = ((3600) - (900))/(50) + 1
+ + DA9062AA_VLDO_A_MIN_SEL,
.desc.enable_reg = DA9062AA_LDO1_CONT,
.desc.enable_mask = DA9062AA_LDO1_EN_MASK,
.desc.vsel_reg = DA9062AA_VLDO1_A,
.desc.vsel_mask = DA9062AA_VLDO1_A_MASK,
- .desc.linear_min_sel = 0,
+ .desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL,
.sleep = REG_FIELD(DA9062AA_VLDO1_A,
__builtin_ffs((int)DA9062AA_LDO1_SL_A_MASK) - 1,
sizeof(unsigned int) * 8 -
@@ -801,12 +806,13 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
.desc.ops = &da9062_ldo_ops,
.desc.min_uV = (900) * 1000,
.desc.uV_step = (50) * 1000,
- .desc.n_voltages = ((3600) - (600))/(50) + 1,
+ .desc.n_voltages = ((3600) - (900))/(50) + 1
+ + DA9062AA_VLDO_A_MIN_SEL,
.desc.enable_reg = DA9062AA_LDO2_CONT,
.desc.enable_mask = DA9062AA_LDO2_EN_MASK,
.desc.vsel_reg = DA9062AA_VLDO2_A,
.desc.vsel_mask = DA9062AA_VLDO2_A_MASK,
- .desc.linear_min_sel = 0,
+ .desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL,
.sleep = REG_FIELD(DA9062AA_VLDO2_A,
__builtin_ffs((int)DA9062AA_LDO2_SL_A_MASK) - 1,
sizeof(unsigned int) * 8 -
@@ -833,12 +839,13 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
.desc.ops = &da9062_ldo_ops,
.desc.min_uV = (900) * 1000,
.desc.uV_step = (50) * 1000,
- .desc.n_voltages = ((3600) - (900))/(50) + 1,
+ .desc.n_voltages = ((3600) - (900))/(50) + 1
+ + DA9062AA_VLDO_A_MIN_SEL,
.desc.enable_reg = DA9062AA_LDO3_CONT,
.desc.enable_mask = DA9062AA_LDO3_EN_MASK,
.desc.vsel_reg = DA9062AA_VLDO3_A,
.desc.vsel_mask = DA9062AA_VLDO3_A_MASK,
- .desc.linear_min_sel = 0,
+ .desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL,
.sleep = REG_FIELD(DA9062AA_VLDO3_A,
__builtin_ffs((int)DA9062AA_LDO3_SL_A_MASK) - 1,
sizeof(unsigned int) * 8 -
@@ -865,12 +872,13 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
.desc.ops = &da9062_ldo_ops,
.desc.min_uV = (900) * 1000,
.desc.uV_step = (50) * 1000,
- .desc.n_voltages = ((3600) - (900))/(50) + 1,
+ .desc.n_voltages = ((3600) - (900))/(50) + 1
+ + DA9062AA_VLDO_A_MIN_SEL,
.desc.enable_reg = DA9062AA_LDO4_CONT,
.desc.enable_mask = DA9062AA_LDO4_EN_MASK,
.desc.vsel_reg = DA9062AA_VLDO4_A,
.desc.vsel_mask = DA9062AA_VLDO4_A_MASK,
- .desc.linear_min_sel = 0,
+ .desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL,
.sleep = REG_FIELD(DA9062AA_VLDO4_A,
__builtin_ffs((int)DA9062AA_LDO4_SL_A_MASK) - 1,
sizeof(unsigned int) * 8 -
diff --git a/include/linux/mfd/da9062/registers.h b/include/linux/mfd/da9062/registers.h
index fe04b708742b..2906bf6160fb 100644
--- a/include/linux/mfd/da9062/registers.h
+++ b/include/linux/mfd/da9062/registers.h
@@ -797,6 +797,9 @@
#define DA9062AA_BUCK3_SL_A_SHIFT 7
#define DA9062AA_BUCK3_SL_A_MASK BIT(7)
+/* DA9062AA_VLDO[1-4]_A common */
+#define DA9062AA_VLDO_A_MIN_SEL 2
+
/* DA9062AA_VLDO1_A = 0x0A9 */
#define DA9062AA_VLDO1_A_SHIFT 0
#define DA9062AA_VLDO1_A_MASK 0x3f
--
2.20.1
Powered by blists - more mailing lists