[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAOMZO5DunK3+ovBd0c0X4NTf-zkW1Tjz6KgXFMaRQKMk2SBMiw@mail.gmail.com>
Date: Fri, 21 Jun 2019 11:00:42 -0300
From: Fabio Estevam <festevam@...il.com>
To: Robert Chiras <robert.chiras@....com>
Cc: Thierry Reding <thierry.reding@...il.com>,
Sam Ravnborg <sam@...nborg.org>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
DRI mailing list <dri-devel@...ts.freedesktop.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
NXP Linux Team <linux-imx@....com>
Subject: Re: [PATCH v3 1/2] dt-bindings: display: panel: Add support for
Raydium RM67191 panel
Hi Robert,
On Thu, Jun 20, 2019 at 10:32 AM Robert Chiras <robert.chiras@....com> wrote:
>
> Add dt-bindings documentation for Raydium RM67191 DSI panel.
>
> Signed-off-by: Robert Chiras <robert.chiras@....com>
> Reviewed-by: Sam Ravnborg <sam@...nborg.org>
> ---
> .../bindings/display/panel/raydium,rm67191.txt | 39 ++++++++++++++++++++++
> 1 file changed, 39 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt
>
> diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt
> new file mode 100644
> index 0000000..52af272
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt
> @@ -0,0 +1,39 @@
> +Raydium RM67171 OLED LCD panel with MIPI-DSI protocol
> +
> +Required properties:
> +- compatible: "raydium,rm67191"
> +- reg: virtual channel for MIPI-DSI protocol
> + must be <0>
> +- dsi-lanes: number of DSI lanes to be used
> + must be <3> or <4>
> +- port: input port node with endpoint definition as
> + defined in Documentation/devicetree/bindings/graph.txt;
> + the input port should be connected to a MIPI-DSI device
> + driver
> +
> +Optional properties:
> +- reset-gpios: a GPIO spec for the RST_B GPIO pin
> +- width-mm: see panel-common.txt
> +- height-mm: see panel-common.txt
> +- video-mode: 0 - burst-mode
> + 1 - non-burst with sync event
> + 2 - non-burst with sync po ulse
No power-supply property?
Powered by blists - more mailing lists