[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190625205617.GA24968@jerusalem>
Date: Tue, 25 Jun 2019 22:56:17 +0200
From: Angelo Dureghello <angelo@...am.it>
To: yibin.gong@....com
Cc: robh@...nel.org, shawnguo@...nel.org, s.hauer@...gutronix.de,
festevam@...il.com, mark.rutland@....com, vkoul@...nel.org,
dan.j.williams@...el.com, linux-imx@....com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
dmaengine@...r.kernel.org, devicetree@...r.kernel.org,
kernel@...gutronix.de
Subject: Re: [PATCH v5 0/6] add edma2 for i.mx7ulp
Hi Robin,
On Tue, Jun 25, 2019 at 05:43:18PM +0800, yibin.gong@....com wrote:
> From: Robin Gong <yibin.gong@....com>
>
> This patch set add new version of edma for i.mx7ulp, the main changes
> are as belows:
> 1. only one dmamux.
> 2. another clock dma_clk except dmamux clk.
> 3. 16 independent interrupts instead of only one interrupt for
> all channels
> For the first change, need modify fsl-edma-common.c and mcf-edma,
> so create the first two patches to prepare without any function impact.
>
> For the third change, need request single irq for every channel with
> the legacy handler. But actually 2 dma channels share one interrupt(16
> channel interrupts, but 32 channels.),ch0/ch16,ch1/ch17... For now, just
> simply request irq without IRQF_SHARED flag, since 16 channels are enough
> on i.mx7ulp whose M4 domain own some peripherals.
>
> change from v1:
> 1. check .data of 'of_device_id' in probe instead of compatible name.
>
> change from v2:
> 1. move the difference between edma and edma2 into driver data so that
> no need version checking in fsl-edma.c.
>
> change from v3:
> 1. remove duplicated 'version' and 'dmamux_nr' in 'struct fsl_edma_engine'
> since they are included in drvdata already.
> 2. downgrade print log level.
> 3. address some minor indent issues raised by Vinod.
>
> change from v4:
> 1. correct typo.
>
> Robin Gong (6):
> dmaengine: fsl-edma: add drvdata for fsl-edma
> dmaengine: fsl-edma-common: move dmamux register to another single
> function
> dmaengine: fsl-edma-common: version check for v2 instead
> dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma
> dmaengine: fsl-edma: add i.mx7ulp edma2 version support
> ARM: dts: imx7ulp: add edma device node
>
> Documentation/devicetree/bindings/dma/fsl-edma.txt | 44 ++++++++-
> arch/arm/boot/dts/imx7ulp.dtsi | 28 ++++++
> drivers/dma/fsl-edma-common.c | 83 ++++++++++------
> drivers/dma/fsl-edma-common.h | 14 ++-
> drivers/dma/fsl-edma.c | 109 ++++++++++++++++++---
> drivers/dma/mcf-edma.c | 11 ++-
> 6 files changed, 239 insertions(+), 50 deletions(-)
>
I tested the patch-set on ColdFire mcf5441x (stmark2 board), all works fine.
Tested-by: Angelo Dureghello <angelo@...am.it>
Regards,
Angelo
> --
> 2.7.4
>
Powered by blists - more mailing lists