[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAEnQRZCVQ0+pRh6akiZJXU-fRugEXmnthZp8Q2=aXFXCO3vcUg@mail.gmail.com>
Date: Wed, 26 Jun 2019 15:45:15 +0300
From: Daniel Baluta <daniel.baluta@...il.com>
To: Abel Vesa <abel.vesa@....com>
Cc: Rob Herring <robh@...nel.org>, Mark Rutland <mark.rutland@....com>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <kernel@...gutronix.de>,
Fabio Estevam <fabio.estevam@....com>,
Anson Huang <anson.huang@....com>,
NXP Linux Team <linux-imx@....com>,
Lucas Stach <l.stach@...gutronix.de>,
Devicetree List <devicetree@...r.kernel.org>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Daniel Baluta <daniel.baluta@....com>
Subject: Re: [PATCH] arm64: dts: imx8mm: Init rates and parents configs for clocks
On Tue, Jun 25, 2019 at 4:42 PM Abel Vesa <abel.vesa@....com> wrote:
>
> Add the initial configuration for clocks that need default parent and rate
> setting. This is based on the vendor tree clock provider parents and rates
> configuration except this is doing the setup in dts rather than using clock
> consumer API in a clock provider driver.
>
> Signed-off-by: Abel Vesa <abel.vesa@....com>
> ---
> arch/arm64/boot/dts/freescale/imx8mm.dtsi | 36 +++++++++++++++++++++++++++++++
> 1 file changed, 36 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> index 232a741..ab92108 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> @@ -451,6 +451,42 @@
> <&clk_ext3>, <&clk_ext4>;
> clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
> "clk_ext3", "clk_ext4";
> + assigned-clocks = <&clk IMX8MM_CLK_AUDIO_AHB>,
> + <&clk IMX8MM_CLK_IPG_AUDIO_ROOT>,
> + <&clk IMX8MM_SYS_PLL3>,
> + <&clk IMX8MM_VIDEO_PLL1>,
> + <&clk IMX8MM_CLK_NOC>,
> + <&clk IMX8MM_CLK_PCIE1_CTRL>,
> + <&clk IMX8MM_CLK_PCIE1_PHY>,
> + <&clk IMX8MM_CLK_CSI1_CORE>,
> + <&clk IMX8MM_CLK_CSI1_PHY_REF>,
> + <&clk IMX8MM_CLK_CSI1_ESC>,
> + <&clk IMX8MM_CLK_DISP_AXI>,
> + <&clk IMX8MM_CLK_DISP_APB>;
> + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
> + <0>,
Isn't there a macro for 0? (dummy clock?)
> + <0>,
> + <0>,
> + <&clk IMX8MM_SYS_PLL3_OUT>,
> + <&clk IMX8MM_SYS_PLL2_250M>,
> + <&clk IMX8MM_SYS_PLL2_100M>,
> + <&clk IMX8MM_SYS_PLL2_1000M>,
> + <&clk IMX8MM_SYS_PLL2_1000M>,
> + <&clk IMX8MM_SYS_PLL1_800M>,
> + <&clk IMX8MM_SYS_PLL2_1000M>,
> + <&clk IMX8MM_SYS_PLL1_800M>;
> + assigned-clock-rates = <400000000>,
> + <400000000>,
> + <750000000>,
> + <594000000>,
> + <0>,
> + <0>,
> + <0>,
> + <0>,
> + <0>,
> + <0>,
> + <500000000>,
> + <200000000>;
> };
>
> src: reset-controller@...90000 {
> --
> 2.7.4
>
Powered by blists - more mailing lists