| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <BYAPR02MB599224BA6280EDF56870E1D8B8F90@BYAPR02MB5992.namprd02.prod.outlook.com>
Date: Mon, 1 Jul 2019 18:06:19 +0000
From: Jolly Shah <JOLLYS@...inx.com>
To: Manish Narani <MNARANI@...inx.com>,
"ulf.hansson@...aro.org" <ulf.hansson@...aro.org>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"mark.rutland@....com" <mark.rutland@....com>,
"heiko@...ech.de" <heiko@...ech.de>,
Michal Simek <michals@...inx.com>,
"adrian.hunter@...el.com" <adrian.hunter@...el.com>,
"christoph.muellner@...obroma-systems.com"
<christoph.muellner@...obroma-systems.com>,
"philipp.tomsich@...obroma-systems.com"
<philipp.tomsich@...obroma-systems.com>,
"viresh.kumar@...aro.org" <viresh.kumar@...aro.org>,
"scott.branden@...adcom.com" <scott.branden@...adcom.com>,
"ayaka@...lik.info" <ayaka@...lik.info>,
"kernel@...il.dk" <kernel@...il.dk>,
"tony.xie@...k-chips.com" <tony.xie@...k-chips.com>,
Rajan Vaja <RAJANV@...inx.com>,
Nava kishore Manne <navam@...inx.com>,
"mdf@...nel.org" <mdf@...nel.org>,
Manish Narani <MNARANI@...inx.com>,
"olof@...om.net" <olof@...om.net>
CC: "linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-rockchip@...ts.infradead.org"
<linux-rockchip@...ts.infradead.org>
Subject: RE: [PATCH v2 09/11] firmware: xilinx: Add SDIO Tap Delay APIs
Hi Manish,
> -----Original Message-----
> From: Manish Narani <manish.narani@...inx.com>
> Sent: Sunday, June 30, 2019 10:30 PM
> To: ulf.hansson@...aro.org; robh+dt@...nel.org; mark.rutland@....com;
> heiko@...ech.de; Michal Simek <michals@...inx.com>;
> adrian.hunter@...el.com; christoph.muellner@...obroma-systems.com;
> philipp.tomsich@...obroma-systems.com; viresh.kumar@...aro.org;
> scott.branden@...adcom.com; ayaka@...lik.info; kernel@...il.dk;
> tony.xie@...k-chips.com; Rajan Vaja <RAJANV@...inx.com>; Jolly Shah
> <JOLLYS@...inx.com>; Nava kishore Manne <navam@...inx.com>;
> mdf@...nel.org; Manish Narani <MNARANI@...inx.com>; olof@...om.net
> Cc: linux-mmc@...r.kernel.org; devicetree@...r.kernel.org; linux-
> kernel@...r.kernel.org; linux-arm-kernel@...ts.infradead.org; linux-
> rockchip@...ts.infradead.org
> Subject: [PATCH v2 09/11] firmware: xilinx: Add SDIO Tap Delay APIs
>
> Add APIs for setting SDIO Tap Delays on ZynqMP platform.
>
> Signed-off-by: Manish Narani <manish.narani@...inx.com>
> ---
> drivers/firmware/xilinx/zynqmp.c | 48
> ++++++++++++++++++++++++++++++++++++
> include/linux/firmware/xlnx-zynqmp.h | 15 ++++++++++-
> 2 files changed, 62 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
> index fd3d837..b81f1be 100644
> --- a/drivers/firmware/xilinx/zynqmp.c
> +++ b/drivers/firmware/xilinx/zynqmp.c
> @@ -664,6 +664,52 @@ static int zynqmp_pm_set_requirement(const u32
> node, const u32 capabilities,
> qos, ack, NULL);
> }
>
> +/**
> + * zynqmp_pm_sdio_out_setphase() - PM call to set clock output delays for SD
> + * @device_id: Device ID of the SD controller
> + * @tap_delay: Tap Delay value for output clock
> + *
> + * This API function is to be used for setting the clock output delays for SD
> + * clock.
> + *
> + * Return: Returns status, either success or error+reason
> + */
> +static int zynqmp_pm_sdio_out_setphase(u32 device_id, u8 tap_delay)
> +{
> + u32 node_id = (!device_id) ? NODE_SD_0 : NODE_SD_1;
> + int ret;
> +
> + ret = zynqmp_pm_ioctl(node_id, IOCTL_SET_SD_TAPDELAY,
> + PM_TAPDELAY_OUTPUT, tap_delay, NULL);
> + if (ret)
> + pr_err("Error setting Output Tap Delay\n");
> +
> + return ret;
> +}
> +
> +/**
> + * zynqmp_pm_sdio_in_setphase() - PM call to set clock input delays for SD
> + * @device_id: Device ID of the SD controller
> + * @tap_delay: Tap Delay value for input clock
> + *
> + * This API function is to be used for setting the clock input delays for SD
> + * clock.
> + *
> + * Return: Returns status, either success or error+reason
> + */
> +static int zynqmp_pm_sdio_in_setphase(u32 device_id, u8 tap_delay)
> +{
> + u32 node_id = (!device_id) ? NODE_SD_0 : NODE_SD_1;
> + int ret;
> +
> + ret = zynqmp_pm_ioctl(node_id, IOCTL_SET_SD_TAPDELAY,
> + PM_TAPDELAY_INPUT, tap_delay, NULL);
> + if (ret)
> + pr_err("Error setting Input Tap Delay\n");
> +
> + return ret;
> +}
> +
> static const struct zynqmp_eemi_ops eemi_ops = {
> .get_api_version = zynqmp_pm_get_api_version,
> .get_chipid = zynqmp_pm_get_chipid,
> @@ -687,6 +733,8 @@ static const struct zynqmp_eemi_ops eemi_ops = {
> .set_requirement = zynqmp_pm_set_requirement,
> .fpga_load = zynqmp_pm_fpga_load,
> .fpga_get_status = zynqmp_pm_fpga_get_status,
> + .sdio_out_setphase = zynqmp_pm_sdio_out_setphase,
> + .sdio_in_setphase = zynqmp_pm_sdio_in_setphase,
Are these eemi APIs? You are using ioctl eemi api to set the delay.
Thanks,
Jolly Shah
> };
>
> /**
> diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-
> zynqmp.h
> index 1262ea6..d9b53e5 100644
> --- a/include/linux/firmware/xlnx-zynqmp.h
> +++ b/include/linux/firmware/xlnx-zynqmp.h
> @@ -92,7 +92,8 @@ enum pm_ret_status {
> };
>
> enum pm_ioctl_id {
> - IOCTL_SET_PLL_FRAC_MODE = 8,
> + IOCTL_SET_SD_TAPDELAY = 7,
> + IOCTL_SET_PLL_FRAC_MODE,
> IOCTL_GET_PLL_FRAC_MODE,
> IOCTL_SET_PLL_FRAC_DATA,
> IOCTL_GET_PLL_FRAC_DATA,
> @@ -251,6 +252,16 @@ enum zynqmp_pm_request_ack {
> ZYNQMP_PM_REQUEST_ACK_NON_BLOCKING,
> };
>
> +enum pm_node_id {
> + NODE_SD_0 = 39,
> + NODE_SD_1,
> +};
> +
> +enum tap_delay_type {
> + PM_TAPDELAY_INPUT = 0,
> + PM_TAPDELAY_OUTPUT,
> +};
> +
> /**
> * struct zynqmp_pm_query_data - PM query data
> * @qid: query ID
> @@ -295,6 +306,8 @@ struct zynqmp_eemi_ops {
> const u32 capabilities,
> const u32 qos,
> const enum zynqmp_pm_request_ack ack);
> + int (*sdio_out_setphase)(u32 device_id, u8 tap_delay);
> + int (*sdio_in_setphase)(u32 device_id, u8 tap_delay);
> };
>
> int zynqmp_pm_invoke_fn(u32 pm_api_id, u32 arg0, u32 arg1,
> --
> 2.1.1
Powered by blists - more mailing lists