| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <AM6PR05MB6535E442AF37B7B079761DB2F9C90@AM6PR05MB6535.eurprd05.prod.outlook.com>
Date: Wed, 17 Jul 2019 14:24:12 +0000
From: Oleksandr Suvorov <oleksandr.suvorov@...adex.com>
To: Cezary Rojewski <cezary.rojewski@...el.com>
CC: Fabio Estevam <festevam@...il.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"alsa-devel@...a-project.org" <alsa-devel@...a-project.org>,
Marcel Ziswiler <marcel.ziswiler@...adex.com>,
Igor Opaniuk <igor.opaniuk@...adex.com>,
Jaroslav Kysela <perex@...ex.cz>,
Mark Brown <broonie@...nel.org>, Takashi Iwai <tiwai@...e.com>,
Liam Girdwood <lgirdwood@...il.com>
Subject: Re: [PATCH v3 6/6] ASoC: sgtl5000: Improve VAG power and mute control
Thank you, Cezary!
This is a good idea, I'll rework my patch accordingly.
R&D Engineer
Oleksandr Suvorov
Toradex AG
________________________________________
From: Cezary Rojewski <cezary.rojewski@...el.com>
Sent: Sunday, July 14, 2019 8:17:43 PM
To: Oleksandr Suvorov
Cc: Fabio Estevam; linux-kernel@...r.kernel.org; alsa-devel@...a-project.org; Marcel Ziswiler; Igor Opaniuk; Jaroslav Kysela; Mark Brown; Takashi Iwai; Liam Girdwood
Subject: Re: [PATCH v3 6/6] ASoC: sgtl5000: Improve VAG power and mute control
On 2019-07-12 16:56, Oleksandr Suvorov wrote:
>
> +enum {
> + HP_POWER_EVENT,
> + DAC_POWER_EVENT,
> + ADC_POWER_EVENT
> +};
> +
> +struct sgtl5000_mute_state {
> + u16 hp_event;
> + u16 dac_event;
> + u16 adc_event;
> +};
> +
> /* sgtl5000 private structure in codec */
> struct sgtl5000_priv {
> int sysclk; /* sysclk rate */
> @@ -137,8 +156,109 @@ struct sgtl5000_priv {
> u8 micbias_voltage;
> u8 lrclk_strength;
> u8 sclk_strength;
> + struct sgtl5000_mute_state mute_state;
Why not array instead?
u16 mute_state[ADC_POWER_EVENT+1];
-or-
u16 mute_state[LAST_POWER_EVENT+1]; (if you choose to add explicit LAST
enum constant).
Enables simplification, see below.
> @@ -170,40 +290,79 @@ static int mic_bias_event(struct snd_soc_dapm_widget *w,
> return 0;
> }
>
> -/*
> - * As manual described, ADC/DAC only works when VAG powerup,
> - * So enabled VAG before ADC/DAC up.
> - * In power down case, we need wait 400ms when vag fully ramped down.
> - */
> -static int power_vag_event(struct snd_soc_dapm_widget *w,
> - struct snd_kcontrol *kcontrol, int event)
> +static void vag_and_mute_control(struct snd_soc_component *component,
> + int event, int event_source,
> + u16 mute_mask, u16 *mute_reg)
> {
> - struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
> - const u32 mask = SGTL5000_DAC_POWERUP | SGTL5000_ADC_POWERUP;
> -
> switch (event) {
> - case SND_SOC_DAPM_POST_PMU:
> - snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
> - SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP);
> - msleep(400);
> + case SND_SOC_DAPM_PRE_PMU:
> + *mute_reg = mute_output(component, mute_mask);
> + break;
> + case SND_SOC_DAPM_POST_PMU:
> + vag_power_on(component, event_source);
> + restore_output(component, mute_mask, *mute_reg);
> break;
> -
> case SND_SOC_DAPM_PRE_PMD:
> - /*
> - * Don't clear VAG_POWERUP, when both DAC and ADC are
> - * operational to prevent inadvertently starving the
> - * other one of them.
> - */
> - if ((snd_soc_component_read32(component, SGTL5000_CHIP_ANA_POWER) &
> - mask) != mask) {
> - snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
> - SGTL5000_VAG_POWERUP, 0);
> - msleep(400);
> - }
> + *mute_reg = mute_output(component, mute_mask);
> + vag_power_off(component, event_source);
> + break;
> + case SND_SOC_DAPM_POST_PMD:
> + restore_output(component, mute_mask, *mute_reg);
> break;
> default:
> break;
> }
> +}
> +
> +/*
> + * Mute Headphone when power it up/down.
> + * Control VAG power on HP power path.
> + */
> +static int headphone_pga_event(struct snd_soc_dapm_widget *w,
> + struct snd_kcontrol *kcontrol, int event)
> +{
> + struct snd_soc_component *component =
> + snd_soc_dapm_to_component(w->dapm);
> + struct sgtl5000_priv *sgtl5000 =
> + snd_soc_component_get_drvdata(component);
> +
> + vag_and_mute_control(component, event, HP_POWER_EVENT,
> + SGTL5000_HP_MUTE,
> + &sgtl5000->mute_state.hp_event);
> +
> + return 0;
> +}
> +
> +/* As manual describes, ADC/DAC powering up/down requires
> + * to mute outputs to avoid pops.
> + * Control VAG power on ADC/DAC power path.
> + */
> +static int adc_updown_depop(struct snd_soc_dapm_widget *w,
> + struct snd_kcontrol *kcontrol, int event)
> +{
> + struct snd_soc_component *component =
> + snd_soc_dapm_to_component(w->dapm);
> + struct sgtl5000_priv *sgtl5000 =
> + snd_soc_component_get_drvdata(component);
> +
> + vag_and_mute_control(component, event, ADC_POWER_EVENT,
> + SGTL5000_OUTPUTS_MUTE,
> + &sgtl5000->mute_state.adc_event);
> +
> + return 0;
> +}
> +
> +static int dac_updown_depop(struct snd_soc_dapm_widget *w,
> + struct snd_kcontrol *kcontrol, int event)
> +{
> + struct snd_soc_component *component =
> + snd_soc_dapm_to_component(w->dapm);
> + struct sgtl5000_priv *sgtl5000 =
> + snd_soc_component_get_drvdata(component);
> +
> + vag_and_mute_control(component, event, DAC_POWER_EVENT,
> + SGTL5000_OUTPUTS_MUTE,
> + &sgtl5000->mute_state.dac_event);
>
> return 0;
> }
With array approach you can simplify these 3 callbacks:
- remove local declaration of sgtl5000
- remove the need for "u16 *mute_reg" param for vag_and_mute_control
(you always provide the xxx_event field of mute_state corresponding to
given XXX_POWER_EVENT anyway)
The sgtl5000 local ptr would be declared within common handler, which
vag_and_mute_control clearly is. Said handler declaration could be
updated to again require widget rather than component.
Cherry on top: relocation of "return 0;" directly to
vag_and_mute_control. Leaving it void (as it is), however, might also be
appropriate (explicit).
Czarek
Powered by blists - more mailing lists