linux-kernel - Re: [PATCH V5 11/18] clk: tegra210: Add support for Tegra210 clocks

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <cc358525-eeca-129e-183c-e0627447c9a8@gmail.com>
Date:   Thu, 18 Jul 2019 23:32:28 +0300
From:   Dmitry Osipenko <digetx@...il.com>
To:     Sowjanya Komatineni <skomatineni@...dia.com>,
        Peter De Schrijver <pdeschrijver@...dia.com>
Cc:     Joseph Lo <josephl@...dia.com>, thierry.reding@...il.com,
        jonathanh@...dia.com, tglx@...utronix.de, jason@...edaemon.net,
        marc.zyngier@....com, linus.walleij@...aro.org, stefan@...er.ch,
        mark.rutland@....com, pgaikwad@...dia.com, sboyd@...nel.org,
        linux-clk@...r.kernel.org, linux-gpio@...r.kernel.org,
        jckuo@...dia.com, talho@...dia.com, linux-tegra@...r.kernel.org,
        linux-kernel@...r.kernel.org, mperttunen@...dia.com,
        spatra@...dia.com, robh+dt@...nel.org, devicetree@...r.kernel.org
Subject: Re: [PATCH V5 11/18] clk: tegra210: Add support for Tegra210 clocks

18.07.2019 23:11, Dmitry Osipenko пишет:
> 18.07.2019 22:24, Sowjanya Komatineni пишет:
>>
>> On 7/18/19 12:18 PM, Peter De Schrijver wrote:
>>> On Tue, Jul 16, 2019 at 09:43:16PM +0300, Dmitry Osipenko wrote:
>>>>> CPU parents are PLL_X, PLL_P, and dfll. PLL_X always runs at higher
>>>>> rate
>>>>> so switching to PLL_P during CPUFreq probe prior to dfll clock enable
>>>>> should be safe.
>>>> AFAIK, PLLX could run at ~200MHz. There is also a divided output of PLLP
>>>> which CCLKG supports, the PLLP_OUT4.
>>>>
>>>> Probably, realistically, CPU is always running off a fast PLLX during
>>>> boot, but I'm wondering what may happen on KEXEC. I guess ideally
>>>> CPUFreq driver should also have a 'shutdown' callback to teardown DFLL
>>>> on a reboot, but likely that there are other clock-related problems as
>>>> well that may break KEXEC and thus it is not very important at the
>>>> moment.
>>>>
>>> If you turn off the DFLL, you have to be aware that the voltage margins
>>> for DFLL use are lower than for PLL use. So you either need to be sure
>>> to switch to a frequency below fmax @ Vmin or you program the boot
>>> voltage and then you can use PLLX as setup by the bootloader. For OVR
>>> regulators you can't program a voltage without the DFLL, so you have to
>>> tristate the PWM output which will give you a hardwired boot voltage.
>>>
>>> Peter.
>>
>> Yes, we switch CPU to PLLP and then disable DFLL during suspend.
> 
> I'm wondering what happens to T124 on resume from suspend, given that it
> switches CPU to PLLX [1]. I imagine that CPU voltage could be lower than
> needed if suspend happened on DFLL. I'm also now vaguely recalling that
> CPUFreq driver was disabled for T124 because of some problems.
> 
> Or maybe warmboot code is actually touching the voltage regulators?

Oh wait, warmboot is even irrelevant LP1.

> [1]
> https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/arch/arm/mach-tegra/sleep-tegra30.S#n389
> 
> That is also should be a problem for T30 if voltage scaling is happening
> and I have some patches in works that are switching CPU to PLLP instead
> of PLLX on suspend/resume.
>