linux-kernel - Re: [PATCH] phy: core: document calibrate() method

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <6345ff36-9ee3-fe41-e416-a1178087b2c7@ti.com>
Date:   Fri, 19 Jul 2019 17:55:30 +0530
From:   Kishon Vijay Abraham I <kishon@...com>
To:     Marek Szyprowski <m.szyprowski@...sung.com>,
        <linux-usb@...r.kernel.org>, <linux-samsung-soc@...r.kernel.org>
CC:     <linux-kernel@...r.kernel.org>,
        Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
Subject: Re: [PATCH] phy: core: document calibrate() method

Hi Marek,

On 19/07/19 5:51 PM, Marek Szyprowski wrote:
> Hi Kishon,
> 
> On 2019-07-19 12:04, Kishon Vijay Abraham I wrote:
>> Hi Marek,
>>
>> On 19/07/19 3:22 PM, Marek Szyprowski wrote:
>>> Commit 36914111e682 ("drivers: phy: add calibrate method") added support
>>> for generic phy_calibrate() method, but it didn't explain in detail when
>>> such method is supposed to be called. Add some more documentation directly
>>> to the phy.h to make it clean that it is intended to be called after every
>>> host controller reset.
>>>
>>> Signed-off-by: Marek Szyprowski <m.szyprowski@...sung.com>
>>> ---
>>>   include/linux/phy/phy.h | 12 ++++++++++++
>>>   1 file changed, 12 insertions(+)
>>>
>>> diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
>>> index 15032f145063..46775e8b0ed9 100644
>>> --- a/include/linux/phy/phy.h
>>> +++ b/include/linux/phy/phy.h
>>> @@ -101,6 +101,18 @@ struct phy_ops {
>>>   	int	(*validate)(struct phy *phy, enum phy_mode mode, int submode,
>>>   			    union phy_configure_opts *opts);
>>>   	int	(*reset)(struct phy *phy);
>>> +
>>> +	/**
>>> +	 * @calibrate:
>>> +	 *
>>> +	 * Optional.
>>> +	 *
>>> +	 * Used to calibrate phy, typically by adjusting some parameters
>>> +	 * in runtime, which are otherwise lost after host controller
>>> +	 * reset and cannot be set in phy_init() and phy_power_on().
>>> +	 *
>>> +	 * Returns: 0 if successful, an negative error code otherwise
>>> +	 */
>>>   	int	(*calibrate)(struct phy *phy);
>> This should be added in drivers/phy/phy-core.c before phy_calibrate()?
> 
> Okay. Do you want to keep it also in phy.h (like for validate and 
> configure)?

No. Adding in phy.txt and before phy_calibrate() should suffice IMO.

Thanks
Kishon