linux-kernel - Re: [PATCH] phy: core: document calibrate() method

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <6729fb28-29ef-a808-64b5-3eaaf7ac31e5@samsung.com>
Date:   Mon, 22 Jul 2019 18:50:47 +0200
From:   Marek Szyprowski <m.szyprowski@...sung.com>
To:     Kishon Vijay Abraham I <kishon@...com>, linux-usb@...r.kernel.org,
        linux-samsung-soc@...r.kernel.org
Cc:     linux-kernel@...r.kernel.org,
        Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
Subject: Re: [PATCH] phy: core: document calibrate() method

Hi Kishon,

On 2019-07-19 14:25, Kishon Vijay Abraham I wrote:
> On 19/07/19 5:51 PM, Marek Szyprowski wrote:
>> On 2019-07-19 12:04, Kishon Vijay Abraham I wrote:
>>> On 19/07/19 3:22 PM, Marek Szyprowski wrote:
>>>> Commit 36914111e682 ("drivers: phy: add calibrate method") added support
>>>> for generic phy_calibrate() method, but it didn't explain in detail when
>>>> such method is supposed to be called. Add some more documentation directly
>>>> to the phy.h to make it clean that it is intended to be called after every
>>>> host controller reset.
>>>>
>>>> Signed-off-by: Marek Szyprowski <m.szyprowski@...sung.com>
>>>> ---
>>>>    include/linux/phy/phy.h | 12 ++++++++++++
>>>>    1 file changed, 12 insertions(+)
>>>>
>>>> diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
>>>> index 15032f145063..46775e8b0ed9 100644
>>>> --- a/include/linux/phy/phy.h
>>>> +++ b/include/linux/phy/phy.h
>>>> @@ -101,6 +101,18 @@ struct phy_ops {
>>>>    	int	(*validate)(struct phy *phy, enum phy_mode mode, int submode,
>>>>    			    union phy_configure_opts *opts);
>>>>    	int	(*reset)(struct phy *phy);
>>>> +
>>>> +	/**
>>>> +	 * @calibrate:
>>>> +	 *
>>>> +	 * Optional.
>>>> +	 *
>>>> +	 * Used to calibrate phy, typically by adjusting some parameters
>>>> +	 * in runtime, which are otherwise lost after host controller
>>>> +	 * reset and cannot be set in phy_init() and phy_power_on().
>>>> +	 *
>>>> +	 * Returns: 0 if successful, an negative error code otherwise
>>>> +	 */
>>>>    	int	(*calibrate)(struct phy *phy);
>>> This should be added in drivers/phy/phy-core.c before phy_calibrate()?
>> Okay. Do you want to keep it also in phy.h (like for validate and
>> configure)?
> No. Adding in phy.txt and before phy_calibrate() should suffice IMO.

OKay, I will move it to phy.c. Generic PHYs documentation is converted 
to RST (Documentation/driver-api/phy/phy.rst), so it could simply 
include those comments from .c file. This can be done in separate patch.

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland