| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190724161829.GA26249@bogus>
Date: Wed, 24 Jul 2019 10:18:29 -0600
From: Rob Herring <robh@...nel.org>
To: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Cc: sboyd@...nel.org, mturquette@...libre.com,
linux-clk@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
haitao.suo@...main.com, darren.tsao@...main.com,
fisher.cheng@...main.com, alec.lin@...main.com
Subject: Re: [PATCH 1/5] dt-bindings: clock: Add Bitmain BM1880 SoC clock
controller binding
On Fri, Jul 05, 2019 at 08:44:36PM +0530, Manivannan Sadhasivam wrote:
> Add devicetree binding for Bitmain BM1880 SoC clock controller.
>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
> ---
> .../bindings/clock/bitmain,bm1880-clk.txt | 47 +++++++++++
> include/dt-bindings/clock/bm1880-clock.h | 82 +++++++++++++++++++
> 2 files changed, 129 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.txt
> create mode 100644 include/dt-bindings/clock/bm1880-clock.h
>
> diff --git a/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.txt b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.txt
> new file mode 100644
> index 000000000000..9c967095d430
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.txt
> @@ -0,0 +1,47 @@
> +* Bitmain BM1880 Clock Controller
> +
> +The Bitmain BM1880 clock controler generates and supplies clock to
checkpatch.pl reports a spelling error...
> +various peripherals within the SoC.
> +
> +Required Properties:
> +
> +- compatible: Should be "bitmain,bm1880-clk"
> +- reg : Register address and size of PLL and SYS control domains
> +- reg-names : Register domain names: "pll" and "sys"
> +- clocks : Phandle of the input reference clock.
> +- #clock-cells: Should be 1.
> +
> +Each clock is assigned an identifier, and client nodes can use this identifier
> +to specify the clock which they consume.
> +
> +All available clocks are defined as preprocessor macros in corresponding
> +dt-bindings/clock/bm1880-clock.h header and can be used in device tree sources.
> +
> +External clocks:
> +
> +The osc clock used as the input for the plls is generated outside the SoC.
> +It is expected that it is defined using standard clock bindings as "osc".
> +
> +Example:
> +
> + clk: clock-controller@800 {
Usually the unit-address is from the first entry.
> + compatible = "bitmain,bm1880-clk";
> + reg = <0xe8 0x0c>,<0x800 0xb0>;
space ^
> + reg-names = "pll", "sys";
> + clocks = <&osc>;
> + #clock-cells = <1>;
> + };
> +
> +Example: UART controller node that consumes clock generated by the clock
> +controller:
> +
> + uart0: serial@...18000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x0 0x58018000 0x0 0x2000>;
> + clocks = <&clk BM1880_CLK_UART_500M>;
> + <&clk BM1880_CLK_APB_UART>;
> + clock-names = "baudclk", "apb_pclk";
> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + };
> diff --git a/include/dt-bindings/clock/bm1880-clock.h b/include/dt-bindings/clock/bm1880-clock.h
> new file mode 100644
> index 000000000000..764472b9a4fd
> --- /dev/null
> +++ b/include/dt-bindings/clock/bm1880-clock.h
> @@ -0,0 +1,82 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Device Tree binding constants for Bitmain BM1880 SoC
> + *
> + * Copyright (c) 2019 Linaro Ltd.
> + */
> +
> +#ifndef __DT_BINDINGS_CLOCK_BM1880_H
> +#define __DT_BINDINGS_CLOCK_BM1880_H
> +
> +#define BM1880_CLK_OSC 0
> +#define BM1880_CLK_MPLL 1
> +#define BM1880_CLK_SPLL 2
> +#define BM1880_CLK_FPLL 3
> +#define BM1880_CLK_DDRPLL 4
space before tab
> +#define BM1880_CLK_A53 5
> +#define BM1880_CLK_50M_A53 6
> +#define BM1880_CLK_AHB_ROM 7
> +#define BM1880_CLK_AXI_SRAM 8
> +#define BM1880_CLK_DDR_AXI 9
> +#define BM1880_CLK_EFUSE 10
> +#define BM1880_CLK_APB_EFUSE 11
> +#define BM1880_CLK_AXI5_EMMC 12
> +#define BM1880_CLK_EMMC 13
> +#define BM1880_CLK_100K_EMMC 14
> +#define BM1880_CLK_AXI5_SD 15
> +#define BM1880_CLK_SD 16
> +#define BM1880_CLK_100K_SD 17
> +#define BM1880_CLK_500M_ETH0 18
> +#define BM1880_CLK_AXI4_ETH0 19
> +#define BM1880_CLK_500M_ETH1 20
> +#define BM1880_CLK_AXI4_ETH1 21
> +#define BM1880_CLK_AXI1_GDMA 22
> +#define BM1880_CLK_APB_GPIO 23
> +#define BM1880_CLK_APB_GPIO_INTR 24
> +#define BM1880_CLK_GPIO_DB 25
> +#define BM1880_CLK_AXI1_MINER 26
> +#define BM1880_CLK_AHB_SF 27
> +#define BM1880_CLK_SDMA_AXI 28
> +#define BM1880_CLK_SDMA_AUD 29
> +#define BM1880_CLK_APB_I2C 30
> +#define BM1880_CLK_APB_WDT 31
> +#define BM1880_CLK_APB_JPEG 32
> +#define BM1880_CLK_JPEG_AXI 33
> +#define BM1880_CLK_AXI5_NF 34
> +#define BM1880_CLK_APB_NF 35
> +#define BM1880_CLK_NF 36
> +#define BM1880_CLK_APB_PWM 37
> +#define BM1880_CLK_DIV_0_RV 38
> +#define BM1880_CLK_DIV_1_RV 39
> +#define BM1880_CLK_MUX_RV 40
> +#define BM1880_CLK_RV 41
> +#define BM1880_CLK_APB_SPI 42
> +#define BM1880_CLK_TPU_AXI 43
> +#define BM1880_CLK_DIV_UART_500M 44
> +#define BM1880_CLK_UART_500M 45
> +#define BM1880_CLK_APB_UART 46
> +#define BM1880_CLK_APB_I2S 47
> +#define BM1880_CLK_AXI4_USB 48
> +#define BM1880_CLK_APB_USB 49
> +#define BM1880_CLK_125M_USB 50
> +#define BM1880_CLK_33K_USB 51
> +#define BM1880_CLK_DIV_12M_USB 52
> +#define BM1880_CLK_12M_USB 53
> +#define BM1880_CLK_APB_VIDEO 54
> +#define BM1880_CLK_VIDEO_AXI 55
> +#define BM1880_CLK_VPP_AXI 56
> +#define BM1880_CLK_APB_VPP 57
> +#define BM1880_CLK_DIV_0_AXI1 58
> +#define BM1880_CLK_DIV_1_AXI1 59
> +#define BM1880_CLK_AXI1 60
> +#define BM1880_CLK_AXI2 61
> +#define BM1880_CLK_AXI3 62
> +#define BM1880_CLK_AXI4 63
> +#define BM1880_CLK_AXI5 64
> +#define BM1880_CLK_DIV_0_AXI6 65
> +#define BM1880_CLK_DIV_1_AXI6 66
> +#define BM1880_CLK_MUX_AXI6 67
> +#define BM1880_CLK_AXI6 68
> +#define BM1880_NR_CLKS 69
> +
> +#endif /* __DT_BINDINGS_CLOCK_BM1880_H */
> --
> 2.17.1
>
Powered by blists - more mailing lists