| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190726180448.2290-2-straube.linux@gmail.com>
Date: Fri, 26 Jul 2019 20:04:44 +0200
From: Michael Straube <straube.linux@...il.com>
To: gregkh@...uxfoundation.org
Cc: Larry.Finger@...inger.net, devel@...verdev.osuosl.org,
linux-kernel@...r.kernel.org,
Michael Straube <straube.linux@...il.com>
Subject: [PATCH 2/6] staging: rtl8188eu: add spaces around '&' in usb_halinit.c
Add spaces around '&' to improve readability and follow kernel
coding style. Reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@...il.com>
---
drivers/staging/rtl8188eu/hal/usb_halinit.c | 38 ++++++++++-----------
1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/usb_halinit.c b/drivers/staging/rtl8188eu/hal/usb_halinit.c
index c2e1b000cf89..fe68af7eaf85 100644
--- a/drivers/staging/rtl8188eu/hal/usb_halinit.c
+++ b/drivers/staging/rtl8188eu/hal/usb_halinit.c
@@ -633,7 +633,7 @@ enum rt_rf_power_state RfOnOffDetect(struct adapter *adapt)
DBG_88E("pwrdown, 0x5c(BIT(7))=%02x\n", val8);
rfpowerstate = (val8 & BIT(7)) ? rf_off : rf_on;
} else { /* rf on/off */
- usb_write8(adapt, REG_MAC_PINMUX_CFG, usb_read8(adapt, REG_MAC_PINMUX_CFG)&~(BIT(3)));
+ usb_write8(adapt, REG_MAC_PINMUX_CFG, usb_read8(adapt, REG_MAC_PINMUX_CFG) & ~(BIT(3)));
val8 = usb_read8(adapt, REG_GPIO_IO_SEL);
DBG_88E("GPIO_IN=%02x\n", val8);
rfpowerstate = (val8 & BIT(3)) ? rf_on : rf_off;
@@ -880,7 +880,7 @@ static void CardDisableRTL8188EU(struct adapter *Adapter)
/* Stop Tx Report Timer. 0x4EC[Bit1]=b'0 */
val8 = usb_read8(Adapter, REG_TX_RPT_CTRL);
- usb_write8(Adapter, REG_TX_RPT_CTRL, val8&(~BIT(1)));
+ usb_write8(Adapter, REG_TX_RPT_CTRL, val8 & (~BIT(1)));
/* stop rx */
usb_write8(Adapter, REG_CR, 0x0);
@@ -905,7 +905,7 @@ static void CardDisableRTL8188EU(struct adapter *Adapter)
/* YJ,add,111212 */
/* Disable 32k */
val8 = usb_read8(Adapter, REG_32K_CTRL);
- usb_write8(Adapter, REG_32K_CTRL, val8&(~BIT(0)));
+ usb_write8(Adapter, REG_32K_CTRL, val8 & (~BIT(0)));
/* Card disable power action flow */
rtl88eu_pwrseqcmdparsing(Adapter, PWR_CUT_ALL_MSK,
@@ -913,7 +913,7 @@ static void CardDisableRTL8188EU(struct adapter *Adapter)
/* Reset MCU IO Wrapper */
val8 = usb_read8(Adapter, REG_RSV_CTRL + 1);
- usb_write8(Adapter, REG_RSV_CTRL + 1, (val8&(~BIT(3))));
+ usb_write8(Adapter, REG_RSV_CTRL + 1, (val8 & (~BIT(3))));
val8 = usb_read8(Adapter, REG_RSV_CTRL + 1);
usb_write8(Adapter, REG_RSV_CTRL + 1, val8 | BIT(3));
@@ -1135,7 +1135,7 @@ static void hw_var_set_opmode(struct adapter *Adapter, u8 variable, u8 *val)
usb_write8(Adapter, REG_BCN_CTRL, usb_read8(Adapter, REG_BCN_CTRL) | BIT(4));
/* set net_type */
- val8 = usb_read8(Adapter, MSR)&0x0c;
+ val8 = usb_read8(Adapter, MSR) & 0x0c;
val8 |= mode;
usb_write8(Adapter, MSR, val8);
@@ -1214,7 +1214,7 @@ static void hw_var_set_bcn_func(struct adapter *Adapter, u8 variable, u8 *val)
if (*((u8 *)val))
usb_write8(Adapter, bcn_ctrl_reg, (EN_BCN_FUNCTION | EN_TXBCN_RPT));
else
- usb_write8(Adapter, bcn_ctrl_reg, usb_read8(Adapter, bcn_ctrl_reg)&(~(EN_BCN_FUNCTION | EN_TXBCN_RPT)));
+ usb_write8(Adapter, bcn_ctrl_reg, usb_read8(Adapter, bcn_ctrl_reg) & (~(EN_BCN_FUNCTION | EN_TXBCN_RPT)));
}
void rtw_hal_set_hwreg(struct adapter *Adapter, u8 variable, u8 *val)
@@ -1228,7 +1228,7 @@ void rtw_hal_set_hwreg(struct adapter *Adapter, u8 variable, u8 *val)
{
u8 val8;
- val8 = usb_read8(Adapter, MSR)&0x0c;
+ val8 = usb_read8(Adapter, MSR) & 0x0c;
val8 |= *((u8 *)val);
usb_write8(Adapter, MSR, val8);
}
@@ -1275,7 +1275,7 @@ void rtw_hal_set_hwreg(struct adapter *Adapter, u8 variable, u8 *val)
/* Set RRSR rate table. */
usb_write8(Adapter, REG_RRSR, BrateCfg & 0xff);
usb_write8(Adapter, REG_RRSR + 1, (BrateCfg >> 8) & 0xff);
- usb_write8(Adapter, REG_RRSR + 2, usb_read8(Adapter, REG_RRSR + 2)&0xf0);
+ usb_write8(Adapter, REG_RRSR + 2, usb_read8(Adapter, REG_RRSR + 2) & 0xf0);
/* Set RTS initial rate */
while (BrateCfg > 0x1) {
@@ -1300,11 +1300,11 @@ void rtw_hal_set_hwreg(struct adapter *Adapter, u8 variable, u8 *val)
tsf = pmlmeext->TSFValue - do_div(pmlmeext->TSFValue, (pmlmeinfo->bcn_interval*1024)) - 1024; /* us */
- if (((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE) || ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE))
+ if (((pmlmeinfo->state & 0x03) == WIFI_FW_ADHOC_STATE) || ((pmlmeinfo->state & 0x03) == WIFI_FW_AP_STATE))
StopTxBeacon(Adapter);
/* disable related TSF function */
- usb_write8(Adapter, REG_BCN_CTRL, usb_read8(Adapter, REG_BCN_CTRL)&(~BIT(3)));
+ usb_write8(Adapter, REG_BCN_CTRL, usb_read8(Adapter, REG_BCN_CTRL) & (~BIT(3)));
usb_write32(Adapter, REG_TSFTR, tsf);
usb_write32(Adapter, REG_TSFTR + 4, tsf>>32);
@@ -1312,7 +1312,7 @@ void rtw_hal_set_hwreg(struct adapter *Adapter, u8 variable, u8 *val)
/* enable related TSF function */
usb_write8(Adapter, REG_BCN_CTRL, usb_read8(Adapter, REG_BCN_CTRL) | BIT(3));
- if (((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE) || ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE))
+ if (((pmlmeinfo->state & 0x03) == WIFI_FW_ADHOC_STATE) || ((pmlmeinfo->state & 0x03) == WIFI_FW_AP_STATE))
ResumeTxBeacon(Adapter);
}
break;
@@ -1357,16 +1357,16 @@ void rtw_hal_set_hwreg(struct adapter *Adapter, u8 variable, u8 *val)
struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info;
if ((is_client_associated_to_ap(Adapter)) ||
- ((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE)) {
+ ((pmlmeinfo->state & 0x03) == WIFI_FW_ADHOC_STATE)) {
/* enable to rx data frame */
usb_write16(Adapter, REG_RXFLTMAP2, 0xFFFF);
/* enable update TSF */
- usb_write8(Adapter, REG_BCN_CTRL, usb_read8(Adapter, REG_BCN_CTRL)&(~BIT(4)));
- } else if ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE) {
+ usb_write8(Adapter, REG_BCN_CTRL, usb_read8(Adapter, REG_BCN_CTRL) & (~BIT(4)));
+ } else if ((pmlmeinfo->state & 0x03) == WIFI_FW_AP_STATE) {
usb_write16(Adapter, REG_RXFLTMAP2, 0xFFFF);
/* enable update TSF */
- usb_write8(Adapter, REG_BCN_CTRL, usb_read8(Adapter, REG_BCN_CTRL)&(~BIT(4)));
+ usb_write8(Adapter, REG_BCN_CTRL, usb_read8(Adapter, REG_BCN_CTRL) & (~BIT(4)));
}
usb_write32(Adapter, REG_RCR, usb_read32(Adapter, REG_RCR)|RCR_CBSSID_BCN);
@@ -1394,7 +1394,7 @@ void rtw_hal_set_hwreg(struct adapter *Adapter, u8 variable, u8 *val)
} else if (type == 2) {
/* sta add event call back */
/* enable update TSF */
- usb_write8(Adapter, REG_BCN_CTRL, usb_read8(Adapter, REG_BCN_CTRL)&(~BIT(4)));
+ usb_write8(Adapter, REG_BCN_CTRL, usb_read8(Adapter, REG_BCN_CTRL) & (~BIT(4)));
if (check_fwstate(pmlmepriv, WIFI_ADHOC_STATE|WIFI_ADHOC_MASTER_STATE))
RetryLimit = 0x7;
@@ -1683,7 +1683,7 @@ void rtw_hal_set_hwreg(struct adapter *Adapter, u8 variable, u8 *val)
/* RX DMA stop */
usb_write32(Adapter, REG_RXPKT_NUM, (usb_read32(Adapter, REG_RXPKT_NUM)|RW_RELEASE_EN));
do {
- if (!(usb_read32(Adapter, REG_RXPKT_NUM)&RXDMA_IDLE))
+ if (!(usb_read32(Adapter, REG_RXPKT_NUM) & RXDMA_IDLE))
break;
} while (trycnt--);
if (trycnt == 0)
@@ -1764,7 +1764,7 @@ void rtw_hal_get_hwreg(struct adapter *Adapter, u8 variable, u8 *val)
*val = Adapter->HalData->bMacPwrCtrlOn;
break;
case HW_VAR_CHK_HI_QUEUE_EMPTY:
- *val = ((usb_read32(Adapter, REG_HGQ_INFORMATION)&0x0000ff00) == 0) ? true : false;
+ *val = ((usb_read32(Adapter, REG_HGQ_INFORMATION) & 0x0000ff00) == 0) ? true : false;
break;
default:
break;
@@ -1925,7 +1925,7 @@ void UpdateHalRAMask8188EUsb(struct adapter *adapt, u32 mac_id, u8 rssi_level)
mask &= rate_bitmap;
- init_rate = get_highest_rate_idx(mask)&0x3f;
+ init_rate = get_highest_rate_idx(mask) & 0x3f;
ODM_RA_UpdateRateInfo_8188E(odmpriv, mac_id, raid, mask, shortGIrate);
--
2.22.0
Powered by blists - more mailing lists