| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1564213888.22908.4.camel@mhfsdcap03>
Date: Sat, 27 Jul 2019 15:51:28 +0800
From: Yong Wu <yong.wu@...iatek.com>
To: CK Hu <ck.hu@...iatek.com>
CC: Matthias Brugger <matthias.bgg@...il.com>,
Joerg Roedel <joro@...tes.org>,
Rob Herring <robh+dt@...nel.org>, <youlin.pei@...iatek.com>,
<devicetree@...r.kernel.org>,
Nicolas Boichat <drinkcat@...omium.org>,
<srv_heupstream@...iatek.com>, Will Deacon <will.deacon@....com>,
<linux-kernel@...r.kernel.org>, Evan Green <evgreen@...omium.org>,
Tomasz Figa <tfiga@...gle.com>,
<iommu@...ts.linux-foundation.org>,
<linux-mediatek@...ts.infradead.org>, <yingjoe.chen@...iatek.com>,
<anan.sun@...iatek.com>, Robin Murphy <robin.murphy@....com>,
<linux-arm-kernel@...ts.infradead.org>, <joey.pan@...iatek.com>
Subject: Re: [PATCH v2 00/12] Clean up "mediatek,larb" after adding
device_link
On Tue, 2019-07-23 at 10:31 +0800, CK Hu wrote:
> Hi, Yong:
>
> I've added log in mtk_smi_clk_enable() and mtk_smi_clk_disable(), and I
> boot MT8183 with display, the log is
>
> [ 4.020340] mtk-smi-common 14019000.smi: mtk_smi_clk_enable()
> [ 4.331371] mtk-smi-common 14019000.smi: mtk_smi_clk_disable()
> [ 4.429578] mtk-smi-common 14019000.smi: mtk_smi_clk_enable()
> [ 4.719743] mtk-smi-common 14019000.smi: mtk_smi_clk_disable()
> [ 5.084770] mtk-smi-common 14019000.smi: mtk_smi_clk_enable()
> [ 5.904310] mtk-smi-common 14019000.smi: mtk_smi_clk_disable()
>
> From the log, the clock is finally turned off, but the display works
> normally. This is because scpsys has turn the clock on,
>
> scpsys: syscon@...06000 {
> compatible = "mediatek,mt8183-scpsys", "syscon";
> #power-domain-cells = <1>;
> reg = <0 0x10006000 0 0x1000>;
> clocks = <&topckgen CLK_TOP_MUX_AUD_INTBUS>,
> <&mmsys CLK_MM_SMI_COMMON>,
> <&mmsys CLK_MM_GALS_COMM0>,
> <&mmsys CLK_MM_GALS_COMM1>,
> clock-names = "audio","mm-0",
> "mm-1", "mm-2";
> }
>
> I'm worried that for MT8173, scpsys would not turn on subsys clock, this
> series would let display work abnormally, so I think smi common should
> not depend on scpsys to turn on the clock.
>
> You could simply remove the clock parameter in scpsys device node, and
> you would see the display works abnormally.
Thanks for the report. I have reproduced this issue by removing the smi
clock in scpsys node.
Now the probe sequence is like this:
a) mtk scpsys (genpd) probe
b) smi probe
c) iommu probe
d) display and the other MM probe.
The log above are called from device_link_add and rpm_idle which is
called between iommu-probe and display-probe.
At the beginning, all the clocks are enabled. But after this
mtk_smi_clk_enable and mtk_smi_clk_disable, the display clock will be
turned off. If the fastlogo is displayed before kernel, then the display
HW will work abnormally.
I have no mt8173 evb board now, I remembered that the screen only is
showed in display driver of kernel in mt8173, It may be ok in that case.
But It really is a problem when the fastlogo is showed before kernel.
This clock issue happened before display driver, It looks display driver
can not help this. I will try to fix it in SMI(smi try to help
display(larb0) to pm_runtime_get_sync one time and put later).
>
> Regards,
> CK
>
>
> On Mon, 2019-06-10 at 20:55 +0800, Yong Wu wrote:
> > MediaTek IOMMU block diagram always like below:
> >
> > M4U
> > |
> > smi-common
> > |
> > -------------
> > | | ...
> > | |
> > larb1 larb2
> > | |
> > vdec venc
> >
> > All the consumer connect with smi-larb, then connect with smi-common.
> >
> > MediaTek IOMMU don't have its power-domain. When the consumer works,
> > it should enable the smi-larb's power which also need enable the smi-common's
> > power firstly.
> >
> > Thus, Firstly, use the device link connect the consumer and the
> > smi-larbs. then add device link between the smi-larb and smi-common.
> >
> > After adding the device_link, then "mediatek,larb" property can be removed.
> > the iommu consumer don't need call the mtk_smi_larb_get/put to enable
> > the power and clock of smi-larb and smi-common.
> >
> > This patchset depends on "MT8183 IOMMU SUPPORT"[1].
> >
> > [1] https://lists.linuxfoundation.org/pipermail/iommu/2019-June/036552.html
> >
> > Change notes:
> > v2:
> > 1) rebase on v5.2-rc1.
> > 2) Move adding device_link between the consumer and smi-larb into
> > iommu_add_device from Robin.
> > 3) add DL_FLAG_AUTOREMOVE_CONSUMER even though the smi is built-in from Evan.
> > 4) Remove the shutdown callback in iommu.
> >
> > v1: https://lists.linuxfoundation.org/pipermail/iommu/2019-January/032387.html
> >
> > Yong Wu (12):
> > dt-binding: mediatek: Get rid of mediatek,larb for multimedia HW
> > iommu/mediatek: Add probe_defer for smi-larb
> > iommu/mediatek: Add device_link between the consumer and the larb
> > devices
> > memory: mtk-smi: Add device-link between smi-larb and smi-common
> > media: mtk-jpeg: Get rid of mtk_smi_larb_get/put
> > media: mtk-mdp: Get rid of mtk_smi_larb_get/put
> > media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
> > drm/mediatek: Get rid of mtk_smi_larb_get/put
> > memory: mtk-smi: Get rid of mtk_smi_larb_get/put
> > iommu/mediatek: Use builtin_platform_driver
> > arm: dts: mediatek: Get rid of mediatek,larb for MM nodes
> > arm64: dts: mediatek: Get rid of mediatek,larb for MM nodes
> >
> > .../bindings/display/mediatek/mediatek,disp.txt | 9 -----
> > .../bindings/media/mediatek-jpeg-decoder.txt | 4 --
> > .../devicetree/bindings/media/mediatek-mdp.txt | 8 ----
> > .../devicetree/bindings/media/mediatek-vcodec.txt | 4 --
> > arch/arm/boot/dts/mt2701.dtsi | 1 -
> > arch/arm/boot/dts/mt7623.dtsi | 1 -
> > arch/arm64/boot/dts/mediatek/mt8173.dtsi | 15 -------
> > drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 11 -----
> > drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 26 ------------
> > drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 1 -
> > drivers/iommu/mtk_iommu.c | 45 +++++++--------------
> > drivers/iommu/mtk_iommu_v1.c | 39 +++++++-----------
> > drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c | 22 ----------
> > drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h | 2 -
> > drivers/media/platform/mtk-mdp/mtk_mdp_comp.c | 38 -----------------
> > drivers/media/platform/mtk-mdp/mtk_mdp_comp.h | 2 -
> > drivers/media/platform/mtk-mdp/mtk_mdp_core.c | 1 -
> > .../media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c | 21 ----------
> > drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h | 3 --
> > drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c | 1 -
> > .../media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c | 47 ----------------------
> > drivers/memory/mtk-smi.c | 31 ++++----------
> > include/soc/mediatek/smi.h | 20 ---------
> > 23 files changed, 36 insertions(+), 316 deletions(-)
> >
>
>
Powered by blists - more mailing lists