[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1563849109.27558.14.camel@mtksdaap41>
Date: Tue, 23 Jul 2019 10:31:49 +0800
From: CK Hu <ck.hu@...iatek.com>
To: Yong Wu <yong.wu@...iatek.com>
CC: Matthias Brugger <matthias.bgg@...il.com>,
Joerg Roedel <joro@...tes.org>,
Rob Herring <robh+dt@...nel.org>, <youlin.pei@...iatek.com>,
<devicetree@...r.kernel.org>,
Nicolas Boichat <drinkcat@...omium.org>,
<srv_heupstream@...iatek.com>, Will Deacon <will.deacon@....com>,
<linux-kernel@...r.kernel.org>, Evan Green <evgreen@...omium.org>,
Tomasz Figa <tfiga@...gle.com>,
<iommu@...ts.linux-foundation.org>,
<linux-mediatek@...ts.infradead.org>, <yingjoe.chen@...iatek.com>,
<anan.sun@...iatek.com>, Robin Murphy <robin.murphy@....com>,
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v2 00/12] Clean up "mediatek,larb" after adding
device_link
Hi, Yong:
I've added log in mtk_smi_clk_enable() and mtk_smi_clk_disable(), and I
boot MT8183 with display, the log is
[ 4.020340] mtk-smi-common 14019000.smi: mtk_smi_clk_enable()
[ 4.331371] mtk-smi-common 14019000.smi: mtk_smi_clk_disable()
[ 4.429578] mtk-smi-common 14019000.smi: mtk_smi_clk_enable()
[ 4.719743] mtk-smi-common 14019000.smi: mtk_smi_clk_disable()
[ 5.084770] mtk-smi-common 14019000.smi: mtk_smi_clk_enable()
[ 5.904310] mtk-smi-common 14019000.smi: mtk_smi_clk_disable()
>From the log, the clock is finally turned off, but the display works
normally. This is because scpsys has turn the clock on,
scpsys: syscon@...06000 {
compatible = "mediatek,mt8183-scpsys", "syscon";
#power-domain-cells = <1>;
reg = <0 0x10006000 0 0x1000>;
clocks = <&topckgen CLK_TOP_MUX_AUD_INTBUS>,
<&mmsys CLK_MM_SMI_COMMON>,
<&mmsys CLK_MM_GALS_COMM0>,
<&mmsys CLK_MM_GALS_COMM1>,
clock-names = "audio","mm-0",
"mm-1", "mm-2";
}
I'm worried that for MT8173, scpsys would not turn on subsys clock, this
series would let display work abnormally, so I think smi common should
not depend on scpsys to turn on the clock.
You could simply remove the clock parameter in scpsys device node, and
you would see the display works abnormally.
Regards,
CK
On Mon, 2019-06-10 at 20:55 +0800, Yong Wu wrote:
> MediaTek IOMMU block diagram always like below:
>
> M4U
> |
> smi-common
> |
> -------------
> | | ...
> | |
> larb1 larb2
> | |
> vdec venc
>
> All the consumer connect with smi-larb, then connect with smi-common.
>
> MediaTek IOMMU don't have its power-domain. When the consumer works,
> it should enable the smi-larb's power which also need enable the smi-common's
> power firstly.
>
> Thus, Firstly, use the device link connect the consumer and the
> smi-larbs. then add device link between the smi-larb and smi-common.
>
> After adding the device_link, then "mediatek,larb" property can be removed.
> the iommu consumer don't need call the mtk_smi_larb_get/put to enable
> the power and clock of smi-larb and smi-common.
>
> This patchset depends on "MT8183 IOMMU SUPPORT"[1].
>
> [1] https://lists.linuxfoundation.org/pipermail/iommu/2019-June/036552.html
>
> Change notes:
> v2:
> 1) rebase on v5.2-rc1.
> 2) Move adding device_link between the consumer and smi-larb into
> iommu_add_device from Robin.
> 3) add DL_FLAG_AUTOREMOVE_CONSUMER even though the smi is built-in from Evan.
> 4) Remove the shutdown callback in iommu.
>
> v1: https://lists.linuxfoundation.org/pipermail/iommu/2019-January/032387.html
>
> Yong Wu (12):
> dt-binding: mediatek: Get rid of mediatek,larb for multimedia HW
> iommu/mediatek: Add probe_defer for smi-larb
> iommu/mediatek: Add device_link between the consumer and the larb
> devices
> memory: mtk-smi: Add device-link between smi-larb and smi-common
> media: mtk-jpeg: Get rid of mtk_smi_larb_get/put
> media: mtk-mdp: Get rid of mtk_smi_larb_get/put
> media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
> drm/mediatek: Get rid of mtk_smi_larb_get/put
> memory: mtk-smi: Get rid of mtk_smi_larb_get/put
> iommu/mediatek: Use builtin_platform_driver
> arm: dts: mediatek: Get rid of mediatek,larb for MM nodes
> arm64: dts: mediatek: Get rid of mediatek,larb for MM nodes
>
> .../bindings/display/mediatek/mediatek,disp.txt | 9 -----
> .../bindings/media/mediatek-jpeg-decoder.txt | 4 --
> .../devicetree/bindings/media/mediatek-mdp.txt | 8 ----
> .../devicetree/bindings/media/mediatek-vcodec.txt | 4 --
> arch/arm/boot/dts/mt2701.dtsi | 1 -
> arch/arm/boot/dts/mt7623.dtsi | 1 -
> arch/arm64/boot/dts/mediatek/mt8173.dtsi | 15 -------
> drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 11 -----
> drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 26 ------------
> drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 1 -
> drivers/iommu/mtk_iommu.c | 45 +++++++--------------
> drivers/iommu/mtk_iommu_v1.c | 39 +++++++-----------
> drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c | 22 ----------
> drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h | 2 -
> drivers/media/platform/mtk-mdp/mtk_mdp_comp.c | 38 -----------------
> drivers/media/platform/mtk-mdp/mtk_mdp_comp.h | 2 -
> drivers/media/platform/mtk-mdp/mtk_mdp_core.c | 1 -
> .../media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c | 21 ----------
> drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h | 3 --
> drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c | 1 -
> .../media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c | 47 ----------------------
> drivers/memory/mtk-smi.c | 31 ++++----------
> include/soc/mediatek/smi.h | 20 ---------
> 23 files changed, 36 insertions(+), 316 deletions(-)
>
Powered by blists - more mailing lists