lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <86wog2mq6k.wl-marc.zyngier@arm.com>
Date:   Sun, 28 Jul 2019 11:03:31 +0100
From:   Marc Zyngier <marc.zyngier@....com>
To:     Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Cc:     tglx@...utronix.de, jason@...edaemon.net, ralf@...ux-mips.org,
        paul.burton@...s.com, jhogan@...nel.org, robh+dt@...nel.org,
        linux-mips@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, mark.rutland@....com,
        john@...ozen.org, hauke@...ke-m.de
Subject: Re: [PATCH 5/5] MIPS: dts: lantiq: danube: easy50712: route the PCI_INTA IRQ through EBU

On Sat, 27 Jul 2019 18:53:15 +0100,
Martin Blumenstingl <martin.blumenstingl@...glemail.com> wrote:
> 
> EBU provides an interrupt line for the PCI_INTA interrupt. Route
> easy50712's PCI interrupt to EBU so the interrupt line is configured
> correctly (using IRQ_TYPE_LEVEL_LOW, this was previously hardcoded in
> the PCI driver) and ACKed properly.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
> ---
>  arch/mips/boot/dts/lantiq/easy50712.dts | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/mips/boot/dts/lantiq/easy50712.dts b/arch/mips/boot/dts/lantiq/easy50712.dts
> index 1ce20b7d05cb..33c26b93cfc9 100644
> --- a/arch/mips/boot/dts/lantiq/easy50712.dts
> +++ b/arch/mips/boot/dts/lantiq/easy50712.dts
> @@ -1,6 +1,8 @@
>  // SPDX-License-Identifier: GPL-2.0
>  /dts-v1/;
>  
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
>  /include/ "danube.dtsi"
>  
>  / {
> @@ -105,7 +107,7 @@
>  			lantiq,bus-clock = <33333333>;
>  			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
>  			interrupt-map = <
> -				0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
> +				0x7000 0 0 1 &ebu0 0 IRQ_TYPE_LEVEL_LOW // slot 14
>  			>;
>  			gpios-reset = <&gpio 21 0>;
>  			req-mask = <0x1>;		/* GNT1 */
> -- 
> 2.22.0
> 

Are you OK with breaking compatibility between kernel and DT? It
usually isn't very nice for users...

Thanks,

	M.

-- 
Jazz is not dead, it just smells funny.

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ