[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAL_JsqLytwfsoyS6TSnpPgTjRTOR0TeQwroX21AHqj3A1mPJ5Q@mail.gmail.com>
Date: Mon, 29 Jul 2019 17:37:19 -0600
From: Rob Herring <robh+dt@...nel.org>
To: Andrew Jeffery <andrew@...id.au>
Cc: netdev <netdev@...r.kernel.org>,
David Miller <davem@...emloft.net>,
Mark Rutland <mark.rutland@....com>,
Joel Stanley <joel@....id.au>, Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Heiner Kallweit <hkallweit1@...il.com>,
devicetree@...r.kernel.org,
"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<linux-arm-kernel@...ts.infradead.org>,
linux-aspeed@...ts.ozlabs.org,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 1/4] dt-bindings: net: Add aspeed,ast2600-mdio binding
On Sun, Jul 28, 2019 at 10:39 PM Andrew Jeffery <andrew@...id.au> wrote:
>
> The AST2600 splits out the MDIO bus controller from the MAC into its own
> IP block and rearranges the register layout. Add a new binding to
> describe the new hardware.
>
> Signed-off-by: Andrew Jeffery <andrew@...id.au>
> ---
> .../bindings/net/aspeed,ast2600-mdio.yaml | 61 +++++++++++++++++++
> 1 file changed, 61 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml
>
> diff --git a/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml
> new file mode 100644
> index 000000000000..fa86f6438473
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml
> @@ -0,0 +1,61 @@
> +# SPDX-License-Identifier: GPL-2.0-or-later
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/aspeed,ast2600-mdio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ASPEED AST2600 MDIO Controller
> +
> +maintainers:
> + - Andrew Jeffery <andrew@...id.au>
> +
> +description: |+
> + The ASPEED AST2600 MDIO controller is the third iteration of ASPEED's MDIO
> + bus register interface, this time also separating out the controller from the
> + MAC.
> +
Should have a:
allOf:
- $ref: "mdio.yaml#"
> +properties:
> + compatible:
> + const: aspeed,ast2600-mdio
> + reg:
> + maxItems: 1
> + description: The register range of the MDIO controller instance
> + "#address-cells":
> + const: 1
> + "#size-cells":
> + const: 0
Then you can drop these 2.
> +
> +patternProperties:
> + "^ethernet-phy@[a-f0-9]$":
> + properties:
> + reg:
> + description:
> + The MDIO bus index of the PHY
And this.
> + compatible:
> + enum:
> + - ethernet-phy-ieee802.3-c22
> + - ethernet-phy-ieee802.3-c45
This isn't specific to ASpeed either and is already covered by
ethernet-phy.yaml.
So that means none of the child node schema is needed here.
> + required:
> + - reg
> +
> +required:
> + - compatible
> + - reg
> + - "#address-cells"
> + - "#size-cells"
> +
> +examples:
> + - |
> + mdio0: mdio@...50000 {
> + compatible = "aspeed,ast2600-mdio";
> + reg = <0x1e650000 0x8>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "okay";
Don't show status in examples.
> +
> + ethphy0: ethernet-phy@0 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0>;
> + };
> + };
> --
> 2.20.1
>
Powered by blists - more mailing lists