| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190729083820.feoc3ohetzaomb32@pengutronix.de>
Date: Mon, 29 Jul 2019 10:38:20 +0200
From: Oleksij Rempel <o.rempel@...gutronix.de>
To: Richard Zhu <hongxing.zhu@....com>
Cc: jassisinghbrar@...il.com, aisheng.dong@....com,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH] mailbox: imx: add support for imx v1 mu
please use format [PATCH v2] description. It is automatically done with
git format-patch -v2
On Mon, Jul 29, 2019 at 10:14:00AM +0800, Richard Zhu wrote:
> There is a version1.0 MU on i.MX7ULP platform.
> One new version ID register is added, and it's offset is 0.
> TRn registers are defined at the offset 0x20 ~ 0x2C.
> RRn registers are defined at the offset 0x40 ~ 0x4C.
> SR/CR registers are defined at 0x60/0x64.
> Extend this driver to support it.
>
> Signed-off-by: Richard Zhu <hongxing.zhu@....com>
> ---
change log can be done here or in a message automatically generate by
format patch:
git format-patch --cover-letter -v2
> drivers/mailbox/imx-mailbox.c | 67 ++++++++++++++++++++++++++++++++-----------
> 1 file changed, 50 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/mailbox/imx-mailbox.c b/drivers/mailbox/imx-mailbox.c
> index 25be8bb..8423a38 100644
> --- a/drivers/mailbox/imx-mailbox.c
> +++ b/drivers/mailbox/imx-mailbox.c
> @@ -12,19 +12,11 @@
> #include <linux/of_device.h>
> #include <linux/slab.h>
>
> -/* Transmit Register */
> -#define IMX_MU_xTRn(x) (0x00 + 4 * (x))
> -/* Receive Register */
> -#define IMX_MU_xRRn(x) (0x10 + 4 * (x))
> -/* Status Register */
> -#define IMX_MU_xSR 0x20
> #define IMX_MU_xSR_GIPn(x) BIT(28 + (3 - (x)))
> #define IMX_MU_xSR_RFn(x) BIT(24 + (3 - (x)))
> #define IMX_MU_xSR_TEn(x) BIT(20 + (3 - (x)))
> #define IMX_MU_xSR_BRDIP BIT(9)
>
> -/* Control Register */
> -#define IMX_MU_xCR 0x24
> /* General Purpose Interrupt Enable */
> #define IMX_MU_xCR_GIEn(x) BIT(28 + (3 - (x)))
> /* Receive Interrupt Enable */
> @@ -44,6 +36,13 @@ enum imx_mu_chan_type {
> IMX_MU_TYPE_RXDB, /* Rx doorbell */
> };
>
> +struct imx_mu_dcfg {
> + u32 xTR[4]; /* Transmit Registers */
> + u32 xRR[4]; /* Receive Registers */
> + u32 xSR; /* Status Register */
> + u32 xCR; /* Control Register */
> +};
> +
> struct imx_mu_con_priv {
> unsigned int idx;
> char irq_desc[IMX_MU_CHAN_NAME_SIZE];
> @@ -61,12 +60,39 @@ struct imx_mu_priv {
> struct mbox_chan mbox_chans[IMX_MU_CHANS];
>
> struct imx_mu_con_priv con_priv[IMX_MU_CHANS];
> + const struct imx_mu_dcfg *dcfg;
> struct clk *clk;
> int irq;
>
> bool side_b;
> };
>
> +static const struct imx_mu_dcfg imx_mu_cfg_imx6sx = {
> + .xTR[0] = 0x0,
> + .xTR[1] = 0x4,
> + .xTR[2] = 0x8,
> + .xTR[3] = 0xC,
I would prefer to init arrays this way:
.xTR[] = {0x0, 0x4, 0x8, 0xc},
For every thing else
Reviewed-by: Oleksij Rempel <o.rempel@...gutronix.de>
> + .xRR[0] = 0x10,
> + .xRR[1] = 0x14,
> + .xRR[2] = 0x18,
> + .xRR[3] = 0x1C,
> + .xSR = 0x20,
> + .xCR = 0x24,
> +};
> +
> +static const struct imx_mu_dcfg imx_mu_cfg_imx7ulp = {
> + .xTR[0] = 0x20,
> + .xTR[1] = 0x24,
> + .xTR[2] = 0x28,
> + .xTR[3] = 0x2C,
> + .xRR[0] = 0x40,
> + .xRR[1] = 0x44,
> + .xRR[2] = 0x48,
> + .xRR[3] = 0x4C,
> + .xSR = 0x60,
> + .xCR = 0x64,
> +};
> +
> static struct imx_mu_priv *to_imx_mu_priv(struct mbox_controller *mbox)
> {
> return container_of(mbox, struct imx_mu_priv, mbox);
> @@ -88,10 +114,10 @@ static u32 imx_mu_xcr_rmw(struct imx_mu_priv *priv, u32 set, u32 clr)
> u32 val;
>
> spin_lock_irqsave(&priv->xcr_lock, flags);
> - val = imx_mu_read(priv, IMX_MU_xCR);
> + val = imx_mu_read(priv, priv->dcfg->xCR);
> val &= ~clr;
> val |= set;
> - imx_mu_write(priv, val, IMX_MU_xCR);
> + imx_mu_write(priv, val, priv->dcfg->xCR);
> spin_unlock_irqrestore(&priv->xcr_lock, flags);
>
> return val;
> @@ -111,8 +137,8 @@ static irqreturn_t imx_mu_isr(int irq, void *p)
> struct imx_mu_con_priv *cp = chan->con_priv;
> u32 val, ctrl, dat;
>
> - ctrl = imx_mu_read(priv, IMX_MU_xCR);
> - val = imx_mu_read(priv, IMX_MU_xSR);
> + ctrl = imx_mu_read(priv, priv->dcfg->xCR);
> + val = imx_mu_read(priv, priv->dcfg->xSR);
>
> switch (cp->type) {
> case IMX_MU_TYPE_TX:
> @@ -138,10 +164,10 @@ static irqreturn_t imx_mu_isr(int irq, void *p)
> imx_mu_xcr_rmw(priv, 0, IMX_MU_xCR_TIEn(cp->idx));
> mbox_chan_txdone(chan, 0);
> } else if (val == IMX_MU_xSR_RFn(cp->idx)) {
> - dat = imx_mu_read(priv, IMX_MU_xRRn(cp->idx));
> + dat = imx_mu_read(priv, priv->dcfg->xRR[cp->idx]);
> mbox_chan_received_data(chan, (void *)&dat);
> } else if (val == IMX_MU_xSR_GIPn(cp->idx)) {
> - imx_mu_write(priv, IMX_MU_xSR_GIPn(cp->idx), IMX_MU_xSR);
> + imx_mu_write(priv, IMX_MU_xSR_GIPn(cp->idx), priv->dcfg->xSR);
> mbox_chan_received_data(chan, NULL);
> } else {
> dev_warn_ratelimited(priv->dev, "Not handled interrupt\n");
> @@ -159,7 +185,7 @@ static int imx_mu_send_data(struct mbox_chan *chan, void *data)
>
> switch (cp->type) {
> case IMX_MU_TYPE_TX:
> - imx_mu_write(priv, *arg, IMX_MU_xTRn(cp->idx));
> + imx_mu_write(priv, *arg, priv->dcfg->xTR[cp->idx]);
> imx_mu_xcr_rmw(priv, IMX_MU_xCR_TIEn(cp->idx), 0);
> break;
> case IMX_MU_TYPE_TXDB:
> @@ -257,7 +283,7 @@ static void imx_mu_init_generic(struct imx_mu_priv *priv)
> return;
>
> /* Set default MU configuration */
> - imx_mu_write(priv, 0, IMX_MU_xCR);
> + imx_mu_write(priv, 0, priv->dcfg->xCR);
> }
>
> static int imx_mu_probe(struct platform_device *pdev)
> @@ -265,6 +291,7 @@ static int imx_mu_probe(struct platform_device *pdev)
> struct device *dev = &pdev->dev;
> struct device_node *np = dev->of_node;
> struct imx_mu_priv *priv;
> + const struct imx_mu_dcfg *dcfg;
> unsigned int i;
> int ret;
>
> @@ -282,6 +309,11 @@ static int imx_mu_probe(struct platform_device *pdev)
> if (priv->irq < 0)
> return priv->irq;
>
> + dcfg = of_device_get_match_data(dev);
> + if (!dcfg)
> + return -EINVAL;
> + priv->dcfg = dcfg;
> +
> priv->clk = devm_clk_get(dev, NULL);
> if (IS_ERR(priv->clk)) {
> if (PTR_ERR(priv->clk) != -ENOENT)
> @@ -335,7 +367,8 @@ static int imx_mu_remove(struct platform_device *pdev)
> }
>
> static const struct of_device_id imx_mu_dt_ids[] = {
> - { .compatible = "fsl,imx6sx-mu" },
> + { .compatible = "fsl,imx7ulp-mu", .data = &imx_mu_cfg_imx7ulp },
> + { .compatible = "fsl,imx6sx-mu", .data = &imx_mu_cfg_imx6sx },
> { },
> };
> MODULE_DEVICE_TABLE(of, imx_mu_dt_ids);
> --
> 2.7.4
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Powered by blists - more mailing lists