linux-kernel - [RESEND v2 2/2] power/supply/sbs-battery: Add ability to force load a battery via the devicetree

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1564481404-39505-3-git-send-email-rtresidd@electromag.com.au>
Date:   Tue, 30 Jul 2019 18:10:04 +0800
From:   Richard Tresidder <rtresidd@...ctromag.com.au>
To:     sre@...nel.org, robh+dt@...nel.org, mark.rutland@....com,
        rtresidd@...ctromag.com.au, kstewart@...uxfoundation.org,
        gregkh@...uxfoundation.org, tglx@...utronix.de,
        rfontana@...hat.com, allison@...utok.net, linux-pm@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [RESEND v2 2/2] power/supply/sbs-battery: Add ability to force load a battery via the devicetree

Add the ability to force load a hot pluggable battery during boot where
there is no gpio detect method available and the module is statically
built. Normal polling will then occur on that battery when it is inserted.

Signed-off-by: Richard Tresidder <rtresidd@...ctromag.com.au>
---
 drivers/power/supply/sbs-battery.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/power/supply/sbs-battery.c b/drivers/power/supply/sbs-battery.c
index 048d205..b55721d 100644
--- a/drivers/power/supply/sbs-battery.c
+++ b/drivers/power/supply/sbs-battery.c
@@ -816,6 +816,7 @@ static int sbs_probe(struct i2c_client *client,
 	struct power_supply_config psy_cfg = {};
 	int rc;
 	int irq;
+	bool dt_force_load;
 
 	sbs_desc = devm_kmemdup(&client->dev, &sbs_default_desc,
 			sizeof(*sbs_desc), GFP_KERNEL);
@@ -852,6 +853,9 @@ static int sbs_probe(struct i2c_client *client,
 	if (rc)
 		chip->poll_retry_count = 0;
 
+	dt_force_load = of_property_read_bool(client->dev.of_node,
+						"sbs,force-load");
+
 	if (pdata) {
 		chip->poll_retry_count = pdata->poll_retry_count;
 		chip->i2c_retry_count  = pdata->i2c_retry_count;
@@ -890,7 +894,7 @@ static int sbs_probe(struct i2c_client *client,
 	 * Before we register, we might need to make sure we can actually talk
 	 * to the battery.
 	 */
-	if (!(force_load || chip->gpio_detect)) {
+	if (!(force_load || chip->gpio_detect || dt_force_load)) {
 		rc = sbs_read_word_data(client, sbs_data[REG_STATUS].addr);
 
 		if (rc < 0) {
-- 
1.8.3.1