linux-kernel - [PATCH v2 10/23] tty: serial: fsl_lpuart: Drop unnecessary extra parenthesis

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190731173045.11718-11-andrew.smirnov@gmail.com>
Date:   Wed, 31 Jul 2019 10:30:32 -0700
From:   Andrey Smirnov <andrew.smirnov@...il.com>
To:     linux-serial@...r.kernel.org
Cc:     Andrey Smirnov <andrew.smirnov@...il.com>,
        Stefan Agner <stefan@...er.ch>,
        Chris Healy <cphealy@...il.com>,
        Cory Tusar <cory.tusar@....aero>,
        Lucas Stach <l.stach@...gutronix.de>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Jiri Slaby <jslaby@...e.com>, linux-imx@....com,
        linux-kernel@...r.kernel.org
Subject: [PATCH v2 10/23] tty: serial: fsl_lpuart: Drop unnecessary extra parenthesis

Drop unnecessary extra parenthesis in the driver.

Signed-off-by: Andrey Smirnov <andrew.smirnov@...il.com>
Cc: Stefan Agner <stefan@...er.ch>
Cc: Chris Healy <cphealy@...il.com>
Cc: Cory Tusar <cory.tusar@....aero>
Cc: Lucas Stach <l.stach@...gutronix.de>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: Jiri Slaby <jslaby@...e.com>
Cc: linux-imx@....com
Cc: linux-serial@...r.kernel.org
Cc: linux-kernel@...r.kernel.org
---
 drivers/tty/serial/fsl_lpuart.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index b3cc44548b34..79922f179b08 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1443,7 +1443,7 @@ static int lpuart_startup(struct uart_port *port)
 	lpuart_setup_watermark(sport);
 
 	temp = readb(sport->port.membase + UARTCR2);
-	temp |= (UARTCR2_RIE | UARTCR2_TIE | UARTCR2_RE | UARTCR2_TE);
+	temp |= UARTCR2_RIE | UARTCR2_TIE | UARTCR2_RE | UARTCR2_TE;
 	writeb(temp, sport->port.membase + UARTCR2);
 
 	if (sport->dma_rx_chan && !lpuart_start_rx_dma(sport)) {
@@ -1651,7 +1651,7 @@ lpuart_set_termios(struct uart_port *port, struct ktermios *termios,
 		termios->c_cflag &= ~CRTSCTS;
 
 	if (termios->c_cflag & CRTSCTS)
-		modem |= (UARTMODEM_RXRTSE | UARTMODEM_TXCTSE);
+		modem |= UARTMODEM_RXRTSE | UARTMODEM_TXCTSE;
 	else
 		modem &= ~(UARTMODEM_RXRTSE | UARTMODEM_TXCTSE);
 
@@ -1662,7 +1662,7 @@ lpuart_set_termios(struct uart_port *port, struct ktermios *termios,
 	if ((termios->c_cflag & CSIZE) == CS7)
 		termios->c_cflag |= PARENB;
 
-	if ((termios->c_cflag & PARENB)) {
+	if (termios->c_cflag & PARENB) {
 		if (termios->c_cflag & CMSPAR) {
 			cr1 &= ~UARTCR1_PE;
 			if (termios->c_cflag & PARODD)
@@ -1701,7 +1701,7 @@ lpuart_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	sport->port.read_status_mask = 0;
 	if (termios->c_iflag & INPCK)
-		sport->port.read_status_mask |=	(UARTSR1_FE | UARTSR1_PE);
+		sport->port.read_status_mask |= UARTSR1_FE | UARTSR1_PE;
 	if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
 		sport->port.read_status_mask |= UARTSR1_FE;
 
@@ -1815,7 +1815,7 @@ lpuart32_serial_setbrg(struct lpuart_port *sport, unsigned int baudrate)
 		tmp |= UARTBAUD_BOTHEDGE;
 
 	tmp &= ~(UARTBAUD_OSR_MASK << UARTBAUD_OSR_SHIFT);
-	tmp |= (((osr-1) & UARTBAUD_OSR_MASK) << UARTBAUD_OSR_SHIFT);
+	tmp |= ((osr-1) & UARTBAUD_OSR_MASK) << UARTBAUD_OSR_SHIFT;
 
 	tmp &= ~UARTBAUD_SBR_MASK;
 	tmp |= sbr & UARTBAUD_SBR_MASK;
@@ -1868,7 +1868,7 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
 	}
 
 	if (termios->c_cflag & CRTSCTS) {
-		modem |= (UARTMODEM_RXRTSE | UARTMODEM_TXCTSE);
+		modem |= UARTMODEM_RXRTSE | UARTMODEM_TXCTSE;
 	} else {
 		termios->c_cflag &= ~CRTSCTS;
 		modem &= ~(UARTMODEM_RXRTSE | UARTMODEM_TXCTSE);
@@ -1917,7 +1917,7 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	sport->port.read_status_mask = 0;
 	if (termios->c_iflag & INPCK)
-		sport->port.read_status_mask |=	(UARTSTAT_FE | UARTSTAT_PE);
+		sport->port.read_status_mask |= UARTSTAT_FE | UARTSTAT_PE;
 	if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
 		sport->port.read_status_mask |= UARTSTAT_FE;
 
@@ -2084,7 +2084,7 @@ lpuart_console_write(struct console *co, const char *s, unsigned int count)
 
 	/* first save CR2 and then disable interrupts */
 	cr2 = old_cr2 = readb(sport->port.membase + UARTCR2);
-	cr2 |= (UARTCR2_TE |  UARTCR2_RE);
+	cr2 |= UARTCR2_TE | UARTCR2_RE;
 	cr2 &= ~(UARTCR2_TIE | UARTCR2_TCIE | UARTCR2_RIE);
 	writeb(cr2, sport->port.membase + UARTCR2);
 
@@ -2115,7 +2115,7 @@ lpuart32_console_write(struct console *co, const char *s, unsigned int count)
 
 	/* first save CR2 and then disable interrupts */
 	cr = old_cr = lpuart32_read(&sport->port, UARTCTRL);
-	cr |= (UARTCTRL_TE |  UARTCTRL_RE);
+	cr |= UARTCTRL_TE | UARTCTRL_RE;
 	cr &= ~(UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_RIE);
 	lpuart32_write(&sport->port, cr, UARTCTRL);
 
@@ -2572,7 +2572,7 @@ static int lpuart_resume(struct device *dev)
 	} else {
 		lpuart_setup_watermark(sport);
 		temp = readb(sport->port.membase + UARTCR2);
-		temp |= (UARTCR2_RIE | UARTCR2_TIE | UARTCR2_RE | UARTCR2_TE);
+		temp |= UARTCR2_RIE | UARTCR2_TIE | UARTCR2_RE | UARTCR2_TE;
 		writeb(temp, sport->port.membase + UARTCR2);
 	}
 
-- 
2.21.0